This report summarizes research conducted by ITI to evaluate the commercialization potential of EG G Mound Applied Technologies' heat treatment process of high strength materials. The remainder of the report describes the nature of demand for maraging steel, extent of demand, competitors, environmental trends, technology life cycle, industry structure, and conclusion. (JL)

Our general objective is to further the development of efficient continuous mild coal gasification processes. Our efforts this year have been in four main areas. A new thrust has been to identify and develop efficient processes to separate the vapor product stream into particulate-free liquid and mist-free gas. We continued work aimed at predicting heat transfer rates (hence throughput) in externally-heated twin-screw pyrolyzers. We sought to provide technical support for the design, installation, startup, and operation of the DOE-sponsored 500 kg/hr twin-screw mild gasification unit at Coal Technology Corporation (CTC). A smaller laboratory effort had the objective of identifying and testing the reaction mechanisms of sulfur species during coal pyrolysis. Detailed subproject objectives are given in their respective sections. 20 refs., 4 figs., 1 tab.

The current focus of the research is low-energy (collision v<<bound v{sub e}) inelastic collisions for selected systems that possess the characteristic that many intermediate states are strongly coupled, such as can occur in classes of excited-atom (including Rydberg atom) collisions with atoms, molecules and positive and negative ions: (1) We are interested in the dependence of various differential and total cross sections on the angular momentum of the initial excited state and on the alignment of the initial electron charge distribution (for non-spherical initially excited states). (2) We wish to understand how characteristics of the classical trajectories (in CTMC calculations), e.g. multiple encounters, quasi-periodicity, chaos, relate to characteristics of the probability (scattering) amplitudes obtained from semiclassical (quantum mechanical) treatments. (3) In particular, in order to investigate a range of interaction regimes,'' we have proposed to study low-Rydberg-atom collisions with: ions and polar molecules (long range interaction); non-polar molecules and atoms (short-range interaction); as well as electron-attaching atoms/molecules (transient electron capture possible). (4) We plan to look for observable signatures of possibly novel intracollisional interference effects and quasi-vibrational resonance effects that may occur in low-Rydberg collisions.

A method of fabricating an electrode for use in a metal chloride battery and an electrode are provided. The electrode has relatively larger and more uniform pores than those found in typical electrodes. The fabrication method includes the steps of mixing sodium chloride particles selected from a predetermined size range with metal particles selected from a predetermined size range, and then rigidifying the mixture. The electrode exhibits lower resistivity values of approximately 0.5 {Omega}cm{sup 2} than those resistivity values of approximately 1.0--1.5 {Omega}cm{sup 2} exhibited by currently available electrodes.

The purpose of the present program is to develop soluble analogs of surface confined catalysts that can be impregnated directly into the coal structure at low temperatures. This approach should avoid problems related to surface area dependence, a two phase (surface-liquid) reaction system and, mass transport limitations. Heteropolyanions (HPAs) offer the opportunity to develop soluble forms of surface confined catalysts. HPAs are multi-functional catalysts that could be used to promote both hydroliquefaction and hydrotreating. In theory, these functions could be employed sequentially or simultaneously and could permit exceptional control of liquefaction reactions and reaction conditions. Thus, the current research program involves efforts to evaluate HPAs as soluble liquefaction nd hydrotreating catalysts, with the goal of developing soluble analogs of surface confined catalysts.

The overall goal of this research project is to formulate a mathematical model of flue gas conditioning. This model will be based on an understanding of why ask properties, such as cohesivity and resistivity, are changed by conditioning. Such a model could serve as a component of the performance models of particulate control devices where flue gas conditioning is used. There are two specific objectives of this research project, which divide the planned research into two main parts. One part of the project is designed to determine how ash particles are modified by interactions with sorbent injection processes and to describe the mechanisms by which these interactions affect fine particle collection. The objective of the other part of the project is to identify the mechanisms by which conditioning agents, including chemically active compounds, modify the key properties of fine fly ash particles.

None

The objective of this evaluation is to provide recommendations to ensure consistency between the technical baseline requirements, baseline design, and the as-constructed Subsurface Lighting System. Recommendations for resolving discrepancies between the as-constructed system, and the technical baseline requirements are included in this report. Cost and Schedule estimates are provided for all recommended modifications. This report does not address items which do not meet current safety or code requirements. These items are identified to the CMO and immediate action is taken to correct the situation. The report does identify safety and code items for which the A/E is recommending improvements. The recommended improvements will exceed the minimum requirements of applicable code and safety guide lines. These recommendations are intended to improve and enhance the operation and maintenance of the facility.

This memo explores the assumptions in Mark P. Mills' report titled 'The Internet Begins with Coal' that relate to current electricity use 'associated with the Internet'. We find that Mills has significantly overestimated electricity use, in some cases by more than an order of magnitude. We adjust his estimates to reflect measured data and more accurate assumptions, which reduces Mills' overall estimate of total Internet-related electricity use by about a factor of eight.

None

AISI with co-funding from DOE has initiated a research and development program aimed at the development of a new process for direct steelmaking, and the program is discussed in this document. The project is expected to cost about $30 million over a three-year period, with the government providing approximately 77 percent of the funds and AISI the balance. In contrast to current steelmaking processes which are largely open and batch, the direct steelmaking process would be closed and continuous. Further, it would use coal directly, thereby avoiding the need for coke ovens. The second year of the Direct Steelmaking Program (November 29, 1989, through November 28, 1990) was a year of significant accomplishment. The various research programs proceeded essentially on schedule and the pilot plant, the centerpiece of the program, was completed about three months behind schedule but began operation in almost a picture-perfect manner. This report presents the last years accomplishments.

C++ is the first object-oriented programming language which produces sufficiently efficient code for consideration in computation-intensive physics and engineering applications. In addition, the increasing availability of massively parallel architectures requires novel programming techniques which may prove to be relatively easy to implement in C++. For these reasons, Division 1541 at Sandia National Laboratories is devoting considerable resources to the development of C++ libraries. This document describes the first of these libraries to be released, PHYSLIB, which defines classes representing Cartesian vectors and (second-order) tensors. This library consists of the header file physlib.h, the inline code file physlib.inl, and the source file physlib.C. The library is applicable to both three-dimensional and two-dimensional problems; the user selects the 2-D version of the library by defining the symbol TWO D in the header file physlib.h and recompiling physlib.C and his own code. Alternately, system managers may wish to provide duplicate header and object modules of each dimensionality. This code was produced under the auspices of Sandia National Laboratories, a federally-funded research center administered for the United States Department of Energy on a non-profit basis by AT T. This code is available to US citizens, and institutions under research, government use and/or commercial license …

The overall objective of the Full-Scale Demonstration of Low-NO{sub x} Cell Burner Retrofit project is to demonstrate the cost-effective reduction of NO{sub x} generated by a large based-loaded (70% capacity factor or greater), coal-fired utility boiler. Specific objectives include: (1) At least 50% NO{sub x} reduction over standard two-nozzle cell burners, without degradation of boiler performance or life; (2) Acquire and evaluate emission and boiler performance data before and after the retrofit to determine NO{sub x} reduction and impact on overall boiler performance; (3) Demonstrate that the retrofit of Low-NO{sub x} Cell Burners in boilers currently equipped with cell burners, is a cost-effective alternative to any other emerging, or commercially-available, NO{sub x} control technology.

The construction of effective supergravity lagrangians for gaugino condensation is reviewed and recent results are presented that are consistent with modular invariance and yield a positive definite potential of the noscale type. Possible implications for phenomenology are briefly discussed. 29 refs.

This department of energy-sponsored mission-oriented research project currently has three emphases. They are: (1) determining the kinetics of monohydroxybiphenyl (OH-BP) production in batch culture by N1-36, an unidentified soil isolate, when the organism is presented with dibenzothiophene (DBT) or dibenzosulfone (DBTO{sub 2}); (2) establishing reliable methods for physically characterizing R68.45, a broad host range plasmid; and (3) attempting to elicit a physiologically consistent and genetically stable ability of some gram negative soil isolates to convert DBT to o,o{prime}-biphenol. Eachh of these goals has subsidiary components. For example, in addition to establishing kinetics of formation of OH-BP by N1-36, analyses have been or will be performed to determine whether the catalytic activity can be achieved with irradiated cells, spheroplasts, and cell extracts. This report presents information on progress towards fulfilling both the principal goals listed above and some relevant ancillary activities.

The effects of the waste content of glass waste forms on Savannah River high-level waste disposal costs are currently under study to adjust the glass frit content to optimize the glass waste loadings and therefore significantly reduce the overall waste disposal cost. Changes in waste content affect onsite Defense Waste Changes in waste contents affect onsite Defense Waste Processing Facility (DWPF) costs as well as offsite shipping and repository emplacement charges. A nominal 1% increase over the 28 wt% waste loading of DWPF glass would reduce disposal costs by about $50 million for Savannah River wastes generated to the year 2000. Optimization of the glass waste forms to be produced in the SWPF is being supported by economic evaluations of the impact of the forms on waste disposal costs. Glass compositions are specified for acceptable melt processing and durability characteristics, with economic effects tracked by the number of waste canisters produced. This paper presents an evaluation of the effects of variations in waste content of the glass waste forms on the overall cost of the disposal, including offsite shipment and repository emplacement, of the Savannah River high-level wastes.

This report reviews research program at cern; research program at fermilab; and proposals for experiments and detector systems at the SSC.

The phi factory (Superconducting Mini-Collider or SMC) proposed for construction at UCLA is a single storage ring with circulating currents of 2 A each of electrons and positrons. The small circumference exacerbates the difficulties of handling the gas load due to photo-desorption from the chamber walls. We analyze the vacuum system for the phi factory to specify design choices. 7 refs., 6 figs., 1 tab.

The Petroleum Marketing Monthly (PMM) is designed to give information and statistical data about a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the f.o.b. and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. 12 figs., 55 tabs.

The objective of this work was to continue the development of the Herbert Easterly heater apparatus for vehicles, such as semi-trailer tractors in order to fully establish its technical feasibility and provide the basis for its commercialization. This heater is auxiliary to the vehicle's primary heating system. With the engine off it heats both the vehicle engine to a temperature at which it starts easily and the vehicle passenger compartment. Specifically, this heater is automatically ignitable, operates directly from the vehicle diesel fuel supply and preheats the vehicle engine fuel prior to combustion. During the course of this work nine different versions of prototype heaters were designed, constructed and tested. All designs were based on the ideas and principles outlined in the Easterly patent. Each successive version incorporated design and fabrication improvements relative to the previous version. The final version, Prototype 9, utilized a multiple water jacket design to capture additional heat from the combustion gases prior to exhausting to the atmosphere. This final prototype exceeded the performance of a commercially available Webasto DBW-2010 using the same commercial burner as the one used in the Webasto unit. The time required to raise the heater fluid temperature by 120{degree}F was 23% …

Developments at Argonne National Laboratory of near and intermediate term applications using high-temperature superconductors are discussed. Near-term applications of liquid-nitrogen depth sensors, current leads, and magnetic bearings are discussed in detail.

The overall goal of this research project is to formulate a mathematical model of flue gas conditioning. This model will be based on an understanding of why ash properties, such as cohesivity and resistivity, are changed by conditioning. Such a model could serve as a component of the performance models of particulate control devices where flue gas conditioning is used. There are two specific objectives of this research project, which divide the planned research into two main parts. One part of the project is designed to determine how ash particles are modified by interactions with sorbent injection processes and to describe the mechanisms by which these interactions affect fine particle collection. The objective of the other part of the project is to identify the mechanisms by which conditioning agents, including chemically active compounds, modify the key properties of fine fly ash particles.

We discuss the use of muon spin relaxation ({mu}{sup +}SR) technique to study the mixed state of superconductors. Besides the application for static vortex configurations, we argue that large vortex motion can manifest itself as a narrowed time-averaged field distribution, which in turn results in a smaller relaxation rate. A static but disordered vortex configuration can also reduce the relaxation. We summarize these arguments. 7 refs.

The inclusive jet cross section and the dijet mass spectrum have been measured at the Fermilab Tevatron Collider at {radical}s = 1.8 TeV. These measurements span approximately 7 orders of magnitude in cross section and contain jets up to 400 GeV in transverse energy and dijet masses up to 950 GeV. Comparisons have been made to QCD at both orders {alpha}{sub s}{sup 2} and {alpha}{sub s}{sup 3}. 8 refs., 9 figs.