The purpose of this dissertation is to investigate the thermodynamic properties of nonelectrolyte solutes dissolved in ternary solvent mixtures, and to develop mathematical expressions for predicting and describing that behavior in the solvent mixtures. Thirty-four ternary solvent systems were studied containing either alcohol (1-propanol, 2-propanol, 1-butanol, and 2-butanol), alkane (cyclohexane, heptane, and 2,2,4-trimethylpentane) or alkoxyalcohol (2-ethoxyethanol and 2-butoxyethanol) cosolvents. Approximately 2500 experimental measurements were performed. Expressions were derived from the Combined Nearly Ideal Multiple Solvent (NIMS)/Redlich-Kister, the Combined Nearly Ideal Multiple Solvent (NIMS)/Bertrand, Acree and Burchfield (BAB) and the Modified Wilson models for predicting solute solubility in ternary solvent (or even higher multicomponent) mixtures based upon the model constants calculated from solubility data in sub-binary solvents. Average percent deviation between predicted and observed values were less than 2%, documenting that these models provide a fairly accurate description of the thermodynamic properties of nonelectrolyte solutions. Moreover, the models can be used for solubility prediction in solvent mixtures in order to find the optimum solvent composition for solubilization or desolubilization of a solute. From a computational standpoint, the Combined Nearly Ideal Multiple Solvent/Redlich-Kister equation is preferred because the needed model constants can be calculated with a simple linear regressional analysis. Model constants …

Part I. Diels-Alder cycloadditions of 1,2,3,4,9,9-hexachloro-1α,4α,4aα,8aβ-tetrahydro-l,4-methanonaphthalene (32) and 1,2,3,4,9,9-hexachloro-lα,4α,6,7- tetrahydro-l,4-methanonaphthalene (33) to 4-methyl- and 4-phenyl-l,2,4-triazoline-3,5-dione [MTAD and PTAD, respectively] and to N-methylmaleimide (NMM) have been studied. The structures of several of the resulting cycloadducts were determined by X-ray crystallographic methods. The observed stereoselectivity of each of these Diels-Alder reactions was further investigated via application of theoretical methods. Thus, semiempirical (AMI) and ab initio molecular orbital calculations were used to calculate relative energies. Ab initio calculations were employed to perform frontier molecular orbital analyses of diene-dienophile interactions.

The focus of this research is to explore the molecular-level interactions between reactive metal surfaces and aqueous environments by combined ultra-high vacuum/electrochemistry (UHV-EC) methodology. The objectives of this work are to understand (1) the effects of sulfate ions on the passivity of metal oxide/hydroxide surface layer, (2) the effects of sulfur-modification on the evolution of metal oxide/hydroxide surface layer, and (3) the effects of sulfur adsorbate on cation adsorption at metal surfaces.

This study was intended to provide a fuller understanding of the surface chemical processes which result in the corrosion of ferrous materials.

The kinetics of ligand substitution for CO in Co4(CO)10(mu4-PPh2) , 1, have been investigated for the ligands P(OMe)3, P(OEt)3, PPh2H, P(0-i-Pr)3, P(n-Bu)3, PPh3, P(i-Pr)3, and PCy3 over a wide temperature range.

The purpose of this study was to determine the factors affecting the acid degradation of chrysotile asbestos (Mg_3Si_2O_5(OH_4)) . Millions of tons of asbestos have found use in this country as insulative or ablative material. More than 95 percent of the asbestos in use is of the chrysotile variety. The remaining 5 percent is composed of various types of fibrous amphiboles. The inhalation of asbestos can lead to several diseases in humans. Asbestosis, lung cancer and mesothelioma are the most common afflictions associated with asbestos inhalation, and they may occur up to 40 years after the initial exposure. It has previously been reported that if more than 50 percent of the magnesium is removed from a chrysotile sample its carcinogenicity is reduced to nil. Several inorganic acids were studied to determine their ability to leach magnesium from chrysotile. It was found that the ability to leach magnesium was dependent upon the acidic anion in addition to the concentration of the acid. The ordering of the efficiency of the acids in their ability to remove magnesium from chrysotile was found to be HCl > H_2SO_4 > H_3PO_4 > HNO_3. Predictive equations were developed to allow the calculation of the amount of …

The characteristics of seventy-six calix[4]arene crystal structures derived from the Cambridge Crystallographic Database are presented. This survey is a discussion of the inter and intramolecular effects on the solid state cavity shape and molecular recognition ability of the compounds. In addition to this survey, four new calix[4]arene crystal structures are presented. The conformational characteristics of these four calixarenes are determined by a complicated array of inter and intramolecular interactions in the crystal packing.

The purpose of this dissertation is to investigate the behavior of polycyclic aromatic hydrocarbons (PAHs) in binary solvent systems and determine and/or develop predictive mathematical expressions for describing solutions in which hydrogen-bonding occurs.

New one- and two-dimensional NMR techniques were used to elucidate the solution structures of these complex mixtures. The system, lithium tert-butoxide/tert-butyllithium, was studied as a model system with O/Li ratios varying from 0/1 to 1/1. It was found that at low O/Li ratios, a single mixed tetrameric aggregate was formed. At higher O/Li ratios, mixed hexameric species were formed. Two other systems, lithium isopropoxide/iso-propyllithium and lithium n-propoxide/n-propyllithium were also studied at low O/Li ratios.

A novel crown ether precursor was developed in which a rigid 4-oxahexacyclo (5.4.1.26.3,10.05,9.08,11) dodecyl cage moiety ("cage functionality") was incorporated.

The tricobalt cluster PhCCo3(CO)9 (1) reacts with the bidentate phosphine ligand 2,3-bis(diphenylphosphino)maleic anhydride (bma) in the presence of added Me3NO to give the diphosphine-substituted cluster PhCCo3(CO)7(bma) (2). Cluster 2 is unstable in solution, readily losing CO to afford Co3(CO)6[(μ2-η2/η1-C(Ph)C=C(PPh2)C(O)OC(O)](μ2-PPh2) (3) as the sole observed product. VT-31P NMR measurements on cluster 2 indicate that the bma ligand functions as both a chelating and a bridging ligand. At -97 °C, 31P NMR analysis of 2 reveals a Keq of 5.7 in favor of the bridging isomer. The bridged bma cluster 2 is the only observed species above -50°C. The solid-state structure of 2 does not correspond to the major bridging isomer observed in solution but rather the minor chelating isomer. The conversion of 2 to 3 followed first-order kinetics, with the reaction rates being independent of the nature of the reaction solvent and strongly suppressed by added CO, supporting a dissociative loss of CO as the rate-determining step. The activation parameters for CO loss were determined to be ΔH≠ = 29.9 ± 2.2 kcal/mol and ΔS≠ = 21.6 ± 6 eu.

A group of azabiphenyl complexes and supramolecules, and their reduced and oxidized forms when possible, were characterized by cyclic voltammetry and electronic absorption spectroscopy. The oxidized and reduced species, if sufficiently stable, were further generated electrochemically inside a specially designed quartz cell with optically transparent electrode, so that the spectra of the electrochemically generated species could be taken in situ. Assignments were proposed for both parent and product electronic spectra. Species investigated included a range of Ru(II) and Pt(II) complexes, as well as catenanes and their comparents. Using the localized electronic model, the electrochemical reduction can be in most cases assigned as azabiphenyl-based, and the oxidation as transition metal-based. This is consistent with the fact that the azabiphenyl compounds have a low lying π* orbital. The electronic absorption spectra of the compounds under study are mainly composed of π —> π* bands with, in some cases, charge transfer bands also.

The tricobalt cluster PhCCo₃(CO)₉ (1) reacts with the bidentate phosphine ligand 2,3-bis(diphenylphosphino)maleic thioanhydride (bta) with added Me₃NO to yield PhCCo₃(CO)₇(bta) (2), which upon heating overnight yields Co₃(CO)₆(μ₂-η²,η¹-C(Ph)C=C(PPH₂)C(O)SC(O)) (μ₂-PPh₂) (3). Cluster (3) has been isolated and characterized by FT-IR and ³¹P NMR spectroscopy. Structural determination of the cluster has been demonstrated by X-ray diffraction analysis. Cluster (3) is analogous to the cluster synthesized by Richmond and coworkers. The redox properties of (3) have been examined by cyclic voltammetry and the data are reported within.

Flash photolysis techniques were applied to studies of solvent displacement by Lewis bases (L) from solvated metal carbonyl complexes of Cr, Mo, and W. On the basis of extensive studies of the reaction rate laws, activation parameters , and linear-free-energy-relationships, it was concluded that the mechanisms of solvent displacement reactions depend on the electronic and steric properties of the solvents and L, as well as the identities of the metal atoms. The strengths of solvent-metal bonding interactions, varying from ca. 7 to 16 kcal/mol, and the bonding "modes" of solvents to metals are sensitive to the structures of the solvent molecules and the identities of the metal centers. The results indicate dissociative desolvation pathways for many arene solvents in (solvent)Cr(CO)_5 (solvent = benzene, fluorobenzene, toluene, etc.) complexes, and are consistent with competitive interchange and dissociative pathways for (n-heptane)M(CO)_5. Different types of (arene)-Cr(CO)_5 interactions were suggested for chlorobenzene (CB) vs. fluorobenzene and other non-halogenated arenes, i.e. via σ-halogen-Cr bond formation in the CB solvate vs. π-arene-Cr bond formation through "isolated" double bonds in solvates of the other arenes. The data also indicate the increasing importance of interchange pathways for solvent displacement from the solvates of Mo and W vs. that of …

Exchange reactions of anions, especially ferrocyanide and carbonate, with layered double hydroxides (LDHs) were investigated in relation to the origin of life on the early Earth. The effect on ferrocyanide exchange of concentration, pH, reaction time and cations are discussed. It was found that there were two different kinds of ferrocyanide species: one was that intercalated into the layered structure, occupying a site of D symmetry within the LDHs, while in the other, the ferrocyanide group retains full O symmetry. In addition, very low concentration, ferrocyanide associated with LDH will change its FTIR absorption shape. Carbonate was much more strongly intercalated than ferrocyanide into the LDHs, probably because of the strong hydrogen bonding.

This study examines the waste of cotton gins as a potential alternative energy source, on account of its heat content, availability, and low emission rates. To confirm that this potential energy source meets minimum industrial fuel standards, this research has carried out an investigation of some important physical characteristics and toxic element analysis of cotton gin waste. Using cotton gin waste as fuel is an attractive solution to the problems of disposing of a surplus agricultural waste as well as supplementing fuel must meet both environmental emission standards and industrial fuel standards, the physical and chemical characteristics of cotton gin waste and its toxic element concentrations are important for its objective evaluation as a fuel. Constituent components, moisture contents, and ash contents of four separate parts of cotton gin waste were determined and evaluated closely following the American Society for Testing and Materials (ASTM) test methods. The three most toxic heavy metals, Arsenic (As), Chromium (Cr), and Lead (Pb), chosen for quantitative analysis were determined by using an inductively coupled plasma atomic emission spectrometry and a microwave oven sample digestion method.

Several chromatographic and spectroscopic techniques were applied to Suwanne River reference fulvic acids (FA) and their permethylated derivatives. Retention mechanisms, structural characteristics, and thermal stabilities of FA and its derivatives and fractions were evaluated.

This work concerns some synthetic processes and basic properties of layered double hydroxides (LDHs). A series of LDHs, a family of newly developed materials found to have many potential uses in industry, were investigated in relating to the origin of life on early Earth. In this work, I successfully intercalated some inorganic as well as organic species. Ammonium, accompanied with ferrocyanide ion, can enter the layered space. It was found there were two kin go f intercalated ferrocyanide species: one is that exchanged with anions and became a part of layered double hydroxide, while the other is suggested to be related to ammonium ferrocyanide neutral species. Formaldehyde, ethanolamine and formate can also be involved into LDHs. To improve the crystallinity, homogeneous precipitation method, which used Urea and Hexamine, was employed. The results reveal the success in the case by Urea but not in that by Hexamine. Annealing could also be used for this purpose. However, it needs to be preocessed in its mother liquor; no improvement on the crystallinity if the material has been washed before annealing.

In this study, reversed phase HPLC with dual UV photodiode (PDA) and fluorescence (FL) detection were used to investigate copper complexes with fulvic, caffeic, vanillic, salicylic, and adipic acids. Application of the RE method provided valuable information on the retention behavior and spectral characteristics of FA and model compounds. Even though the method was only applicable to VA, the use of the PDA detector allowed the UV-V is scanning of the separated peaks. This allowed the comparison between the UV-Vis spectra of uncomplexed species. The overall results provide an experimental framework for validation of the proposed Cu-humate interaction models.

Trapping reactions, matrix isolation and kinetics of a few photogenerated silylenes and silenes have been studied. Several vinylsiliranes, the long sought intermediates from the addition of dimesitylsilylene to various 1,3-dienes, have been made and characterized. The product study by various nmr techniques demonstrates that the silylene addition to the dienes is highly stereospecific and the addition to the cis v bond is about 9 times faster than to the trans one in gis,trans-2,4-hexadiene. High stereospecifity of the addition of dimesitylsilylene to cis and trans-2-pentenes and to cis and trans-4-octenes has also been found. The reinvestigation of dimesitylsilylene to cis and t;rans-2-butene affords the possible explanation for the confusing results and wrong conclusion from the earlier report by Ando and coworkers.

The purpose of this investigation was to provide a systematic study of the cycloaddition pf (N-alkyl-N-phenylamino)- methoxy-and dichloroketenes to various imines and to investigate the stereochemistry of these cycloadditions.

The Semiconductor Industry Association (SIA) has identified the integration of copper (Cu) with low-dielectric-constant (low-k) materials as a critical goal for future interconnect architectures. A fundamental understanding of the chemical interaction of Cu with various substrates, including diffusion barriers and adhesion promoters, is essential to achieve this goal. The objective of this research is to develop novel organic polymers as Cu/low-k interfacial layers and to investigate popular barrier candidates, such as clean and modified tantalum (Ta) substrates. Carbon-silicon (C-Si) polymeric films have been formed by electron beam bombardment or ultraviolet (UV) radiation of molecularly adsorbed vinyl silane precursors on metal substrates under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is via the vinyl groups, while Auger electron spectroscopy (AES) results show that the polymerized films have compositions similar to the precursors. Films derived from vinyltrimethyl silane (VTMS) are adherent and stable on Ta substrates until 1100 K. Diffusion of deposited Cu overlayers is not observed below 800 K, with dewetting occurred only above 400 K. Hexafluorobenzene moieties can also be incorporated into the growing film with good thermal stability. Studies on the Ta substrates demonstrate that even sub-monolayer coverages of oxygen or carbide on polycrystalline …

A variety of novel cage-functionalized pyridyl containing crown ethers have been prepared for use in selective alkali metal complexation studies. A highly preorganized, cage-functionalized cryptand also has been designed and has been synthesized for use as a selective Li+ complexant. The alkali metal picrate extraction profiles of these cage-functionalized crown ethers also have been studied. Novel cage-functionalized diazacrown ethers have been prepared for selective alkali metal complexation studies. Alkali metal picrate extraction experiments have been performed by using this new class of synthetic ionophores to investigate the effects of cage-annulation and the influence of N-pivot lariat sidearms upon their resulting complexation properties. Novel pyridyl containing calix[4]arene receptors were prepared. Analysis of their respective 1H NMR and 13C NMR spectra suggests that calix[4]arene moieties in the ligand occupy the cone conformation. The complexation properties of these host molecules were estimated by performing a series of alkali metal picrate extraction experiments. An optically active cage-functionalized crown ether which contains a binaphthyl moiety as the chiral unit was prepared. The ability of the resulting optically active crown ether to distinguish between enantiomers of guest ammonium ions (i.e., phenylethylamonium and phenylglycinate salts) in transport experiments was investigated. Hexacyclo[11.2.1.02,12.05,10.05,15.010,14]hexadeca-6,8-diene-4,11-dione was prepared from hexacyclo[7.4.2.01,9.03,7.04,14.06,15] pentadeca-10,12-diene-2,8-dione. Unanticipated …

Reaction of the tetracobalt cluster Co4(CO)10(t 4-PPh)2 with 1,2-bis(dimethylphosphino)ethane (dmpe) affords the bis-substituted cluster Co4(CO)8(dmpe)(t 4-PPh)2. The bidentate dmpe ligand is shown to bind to the cluster in a chelating fashion by IR, NMR, and X-ray diffractions analyses. The fluxional nature of the ancillary carbonyl groups has been studied by variable temperature 13C NMR measurements which reveal two distinct carbonyl scrambling pathways. The stability of the phosphine-ligated cluster has been examined using in situ Cylindrical Internal Reflection (CIR) Spectroscopy. The effect of the dmpe ligand on the cluster polyhedron will be discussed with respect to the observed crystallographic and spectroscopic results