The Semiconductor Industry Association (SIA) has identified the integration of copper (Cu) with low-dielectric-constant (low-k) materials as a critical goal for future interconnect architectures. A fundamental understanding of the chemical interaction of Cu with various substrates, including diffusion barriers and adhesion promoters, is essential to achieve this goal. The objective of this research is to develop novel organic polymers as Cu/low-k interfacial layers and to investigate popular barrier candidates, such as clean and modified tantalum (Ta) substrates. Carbon-silicon (C-Si) polymeric films have been formed by electron beam bombardment or ultraviolet (UV) radiation of molecularly adsorbed vinyl silane precursors on metal substrates under ultra-high vacuum (UHV) conditions. Temperature programmed desorption (TPD) studies show that polymerization is via the vinyl groups, while Auger electron spectroscopy (AES) results show that the polymerized films have compositions similar to the precursors. Films derived from vinyltrimethyl silane (VTMS) are adherent and stable on Ta substrates until 1100 K. Diffusion of deposited Cu overlayers is not observed below 800 K, with dewetting occurred only above 400 K. Hexafluorobenzene moieties can also be incorporated into the growing film with good thermal stability. Studies on the Ta substrates demonstrate that even sub-monolayer coverages of oxygen or carbide on polycrystalline …

Hartree-Fock, Moller-Plesset, and density functional theory calculations have been carried out using 6-31+G(d), 6-31+G(d,p) and 6-31++G(d,p) basis sets to study the properties of low-barrier or short-strong hydrogen bonds (SSHB) and their potential role in enzyme-catalyzed reactions that involve proton abstraction from a weak carbon-acid by a weak base. Formic acid/formate anion, enol/enolate and other complexes have been chosen to simulate a SSHB system. These complexes have been calculated to form very short, very short hydrogen bonds with a very low barrier for proton transfer from the donor to the acceptor. Two important environmental factors including small amount of solvent molecules that could possibly exist at the active site of an enzyme and the polarity around the active site were simulated to study their energetic and geometrical influences to a SSHB. It was found that microsolvation that improves the matching of pK as of the hydrogen bond donor and acceptor involved in the SSHB will always increase the interaction of the hydrogen bond; microsolvation that disrupts the matching of pKas, on the other hand, will lead to a weaker SSHB. Polarity surrounding the SSHB, simulated by SCRF-SCIPCM model, can significantly reduce the strength and stability of a SSHB. The residual strength …

A variety of novel cage-functionalized pyridyl containing crown ethers have been prepared for use in selective alkali metal complexation studies. A highly preorganized, cage-functionalized cryptand also has been designed and has been synthesized for use as a selective Li+ complexant. The alkali metal picrate extraction profiles of these cage-functionalized crown ethers also have been studied. Novel cage-functionalized diazacrown ethers have been prepared for selective alkali metal complexation studies. Alkali metal picrate extraction experiments have been performed by using this new class of synthetic ionophores to investigate the effects of cage-annulation and the influence of N-pivot lariat sidearms upon their resulting complexation properties. Novel pyridyl containing calix[4]arene receptors were prepared. Analysis of their respective 1H NMR and 13C NMR spectra suggests that calix[4]arene moieties in the ligand occupy the cone conformation. The complexation properties of these host molecules were estimated by performing a series of alkali metal picrate extraction experiments. An optically active cage-functionalized crown ether which contains a binaphthyl moiety as the chiral unit was prepared. The ability of the resulting optically active crown ether to distinguish between enantiomers of guest ammonium ions (i.e., phenylethylamonium and phenylglycinate salts) in transport experiments was investigated. Hexacyclo[11.2.1.02,12.05,10.05,15.010,14]hexadeca-6,8-diene-4,11-dione was prepared from hexacyclo[7.4.2.01,9.03,7.04,14.06,15] pentadeca-10,12-diene-2,8-dione. Unanticipated …

A novel crown ether precursor was developed in which a rigid 4-oxahexacyclo (5.4.1.26.3,10.05,9.08,11) dodecyl cage moiety ("cage functionality") was incorporated.

The purpose of this dissertation is to investigate the thermodynamic properties of nonelectrolyte solutes dissolved in ternary solvent mixtures, and to develop mathematical expressions for predicting and describing that behavior in the solvent mixtures. Thirty-four ternary solvent systems were studied containing either alcohol (1-propanol, 2-propanol, 1-butanol, and 2-butanol), alkane (cyclohexane, heptane, and 2,2,4-trimethylpentane) or alkoxyalcohol (2-ethoxyethanol and 2-butoxyethanol) cosolvents. Approximately 2500 experimental measurements were performed. Expressions were derived from the Combined Nearly Ideal Multiple Solvent (NIMS)/Redlich-Kister, the Combined Nearly Ideal Multiple Solvent (NIMS)/Bertrand, Acree and Burchfield (BAB) and the Modified Wilson models for predicting solute solubility in ternary solvent (or even higher multicomponent) mixtures based upon the model constants calculated from solubility data in sub-binary solvents. Average percent deviation between predicted and observed values were less than 2%, documenting that these models provide a fairly accurate description of the thermodynamic properties of nonelectrolyte solutions. Moreover, the models can be used for solubility prediction in solvent mixtures in order to find the optimum solvent composition for solubilization or desolubilization of a solute. From a computational standpoint, the Combined Nearly Ideal Multiple Solvent/Redlich-Kister equation is preferred because the needed model constants can be calculated with a simple linear regressional analysis. Model constants …

Part I. Diels-Alder cycloadditions of 1,2,3,4,9,9-hexachloro-1α,4α,4aα,8aβ-tetrahydro-l,4-methanonaphthalene (32) and 1,2,3,4,9,9-hexachloro-lα,4α,6,7- tetrahydro-l,4-methanonaphthalene (33) to 4-methyl- and 4-phenyl-l,2,4-triazoline-3,5-dione [MTAD and PTAD, respectively] and to N-methylmaleimide (NMM) have been studied. The structures of several of the resulting cycloadducts were determined by X-ray crystallographic methods. The observed stereoselectivity of each of these Diels-Alder reactions was further investigated via application of theoretical methods. Thus, semiempirical (AMI) and ab initio molecular orbital calculations were used to calculate relative energies. Ab initio calculations were employed to perform frontier molecular orbital analyses of diene-dienophile interactions.

The focus of this research is to explore the molecular-level interactions between reactive metal surfaces and aqueous environments by combined ultra-high vacuum/electrochemistry (UHV-EC) methodology. The objectives of this work are to understand (1) the effects of sulfate ions on the passivity of metal oxide/hydroxide surface layer, (2) the effects of sulfur-modification on the evolution of metal oxide/hydroxide surface layer, and (3) the effects of sulfur adsorbate on cation adsorption at metal surfaces.

Pulsed laser flash photolysis with both visible and infrared detection has been applied to the study of the displacement of weakly coordinating ligands (Lw) by strongly "trapping" nucleophiles (Ls) containing either an olefinic functionality (Ls = 1-hexene, 1-decene, 1-tetradecene) or nitrogen (Ls = acetonitrile, hydrocinnamonitrile) from the photogenerated 16 electron pentacarbonylchromium (0) intermediate. 5-Chloropent-l-ene (Cl-ol), a potentially bidentate ligand, has been shown to form (ol-Cl) pentacarbonylchromium (0), in which Cl-ol is bonded to Cr via a lone pair on the chlorine, and isomerize to (Cl-ol) pentacarbonylchromium (0), in which Cl-ol is bonded to the olefinic functionality on the submillisecond time scale. This process has been studied in both the infrared and visible region employing both fluorobenzene or n-heptane as the "inert" diluent. Parallel studies employing 1-chlorobutane and 1-hexene were also evaluated and showed great similiarity with the Cl-ol system. The data supported a largely dissociative process with a possibility of a small interchange process involving the H's on the alkyl chain. Studies were also carried out for various Cr(CO)6/arene/Ls systems (arene = various alkyl or halogenated substituted benzenes). The data indicated that for both C6H5R (R=various alkyl chains) or multi-alkyl substituted arenes (i.e. o-xylene, 1,2,3-trimethylbenzene) containing an "unhindered" ring-edge, bonding …

Calixarenes are a class of macrocyclic compounds that have garnered interest in large part because of their ability to form host-guest complexes with various types of molecules. For all of the studies of complex formation by calixarenes, most of the work to date has concentrated upon the smaller calixarenes, and little is understood about the relationship between the complexes formed when in solution and that observed in the solid state. The first part of the study, presented in Chapter 3, is of the solid-state properties of two of the larger calixarenes, and in comparison to other reported structures reveals patterns to the observed conformations both in the solid state and in solution. The formation of metal complexes has also been investigated and has focused extensively upon the metals as guests. Thus, the ability of the calixarenes to act as ligands in inorganic complexes has been virtually untapped, despite the polyoxo binding site they can easily provide, and very few metallocalixarenes have been reported. The second part of this study goes beyond the simple solid-state properties of such compounds, and involves the synthesis of several metallocalixarenes as part of a project directed at the functionalization of calixarenes with the components of …

Detection, identification and separation of polycyclic aromatic compounds in environmental samples are of extreme importance since many of these compounds are well known for their potential carcinogenic and/or mutagenic activities. Selective quenching of molecular fluorescence can be utilized effectively to analyze mixtures containing different polycyclic aromatic hydrocarbons. Molecularly organized assemblies are used widely in detection and separation of these compounds mainly because of less toxicity and enhanced solubilization capabilities associated with these media. Feasibility of using nitromethane and the alkylpyridinium cation as selective fluorescence quenching agents for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is critically examined in several molecularly organized micellar solvent media. Fluorescence quenching is used to probe the structural features in mixed micelles containing the various combinations of anionic, cationic, nonionic and zwitterionic surfactants. Experimental results provide valuable information regarding molecular interactions between the dissimilar surfactants.

Barium Strontium Titanate (BST) was deposited on Pt/ZrO2 / SiO2/Si substrates using liquid source metal organic chemical vapor deposition. A stoichiometry series was deposited with various GrII/Ti ratios (0.658 to 1.022) and a temperature series was deposited at 550 to 700°C. The thin films were characterized using transmission electron microscopy. Both series of samples contained cubic perovskite BST and an amorphous phase. The grain size increased and the volume fraction of amorphous phase decreased with increasing deposition temperature. The electrical and microstructural properties improved as the GrII/Ti ratio approached 1 and deteriorated beyond 1. This research demonstrates that BST thin films are a strong candidate for future MOS transistor gate insulator applications.

The preparation of layered double hydroxides via titration with sodium hydroxide was thoroughly investigated for a number of M(II)/M(III) combinations. These titration curves were examined and used to calculate nominal solubility product constants and other thermodynamic quantities for the various LDH chloride systems.

This study is an investigation of the chemical vapor deposition (CVD) of aluminum and copper on fluoropolymer surfaces and the subsequent interfacial interactions.

Mixed alkyllithium / lithium alkoxide aggregates in the form (RLi)n(ROLi)m were formed by addition of corresponding alcohol compounds at different Li/O ratios. Variable temperature 13C and 6Li NMR spectroscopy were used to verify the formation of the mixed aggregates and to study their behavior in hydrocarbon solution. Spectra for the lithium n-propoxide / n-propyllithium and iso-butyllithium / lithium iso-butoxide systems each indicated at least one mixed aggregate.

I. Diels-Alder reactions of 1,2,3,4,9,9-hexachloro-1,4,4a,8a-tetrahydro-1,4-metha- nonaphthalene (16) and 1,2,3,4,9,9-hexachloro-1,4,6,7-tetrahydro-1,4-methanonaphthalene (17) toward dienophiles N-methyl-1,2,4-triazoline-3,5-dione (MTAD), N-phenyl-1,2,4-triazoline-3,5-dione (PTAD) and/or N-methylmaleimide (NMM) have been examined. II. Epoxides derived from functionalized 1,4,4a,9a-tetrahydro-9,10-dioxo-1,4-methanoanthracenes (1a and 1b) undergo acid- and base-promoted intramolecular nucleophilic ring-opening to form new polycyclic alcohols. III. The title cycloalkylidenecarbene has been generated via reaction of 8-methylenepentacyclo[5.4.0.0^{2,6}.0^{3,10}. 0^{5.9}]undecan-11-one (44) with diethyl diazomethyl-phosphonate (DAMP). This species could be trapped in situ by cyclohexene, thereby affording the corresponding cycloadduct 46a and 46b.

One of the more attractive attributes of calixarenes is their wide variety of possible conformations and hence cavity shapes. However, the flexibility that allows this long-range benefit gives rise to major synthetic challenges when working with the larger members of the family. O-alkylations have proven to be the most widely employed synthetic routes to "functionalization" of the calixarenes, and these have shown a dependence upon both solvent and the metal ions present. Surprisingly, there have been no structural data presented concerning the complexes between the simple unsubstituted calix[6]arenes and the metal ions of groups 1 and 2. The structures of four complexes, containing cesium, rubidium, and calcium are reported as determined by X-ray crystallography. The solution behavior of the complexes for both representative groups is also discussed, in particular with regard to conformational stabilization of the calix[6]arenes and the role of solvent upon this stabilization. These complexes are also investigated as starting materials for the selective functionalization of the calix[6]arenes.

The effects of lithium alkoxides on the rates of reactions and on the structures of a series of tert-butyllithium/lithium alkoxide mixed aggregates were studied, where the alkoxides were iso-butoxide, tert-butoxide and menthoxide. It was found that their effects depend not only on their amount present, but also on their steric bulk. The tert-butyllithium/lithium alkoxide mixed aggregates were exposed to UV light or heat to form lithium hydride/lithium alkoxide mixed aggregates. The aggregation states were assigned from either 13C-6Li coupling or a new technique based on the relative intensity of NMR peaks using different nuclei. The compounds formed depend upon the method of formation and the alkoxide. The unique properties of the lithium hydride/lithium alkoxide mixed aggregates are their high solubility in hydrocarbon solutions, very reactive bases, showing 6Li-1H couplings, and having only one hydride ion per aggregate. Their formation, reactivity, solubility, and aggregation states were found to depend on the size of lithium alkoxides. X-ray crystal structures of lithium tert-butoxide and lithium menthoxide were also studied and found to be hexameric.

The effect of varying substituents on structure and energies of bisketenes was studied using ab initio methods. Effect of substituents on ring closing reaction of bisketenes to the corresponding cyclobutenediones was also studied using ab initio methods. One or two of the following substituents were used to study the effect of varying substituents: BH2, CH3, NH2, OH, F, AlH2, SiH3, PH2, SH, Cl. Studies were done at the Hartree-Fock (HF), Møller-Plesset (MP2), and Density Functional Theory (B3LYP) levels of theory using the 6-31G* basis set.

Nitroglycerin and isoamyl nitrate have been used as nitrovasodilators since the nineteeth century. However, not until recently has it been known that these compounds were useful since they promoted the release of NO in the body. More recently, a new class of drugs, NO donors, has been developed. These include S-nitrosothiols (RSNO), sydnonimines, and nucleophilic NO adducts.

The nucleation and successful growth of copper (Cu) thin films on diffusion barrier/adhesion promoter substrates during metal-organic chemical vapor deposition (MOCVD) are strongly dependent on the initial Cu precursor-substrate chemistry and surface conditions such as organic contamination and oxidation. This research focuses on the interactions of bis(1,1,1,5,5,5-hexafluoroacetylacetonato)copper(II), [Cu(hfac)2], with polycrystalline tantalum (Ta) and polycrystalline as well as epitaxial titanium nitride (TiN) substrates during Cu MOCVD, under ultra-high vacuum (UHV) conditions and low substrate temperatures (T < 500 K). The results obtained from X-ray photoelectron spectroscopy (XPS), Auger Electron Spectroscopy (AES) and Temperature Programmed Desorption (TPD) measurements indicate substantial differences in the chemical reaction pathways of metallic Cu formation from Cu(hfac)2 on TiN versus Ta surfaces.

Exchange reactions of anions, especially ferrocyanide and carbonate, with layered double hydroxides (LDHs) were investigated in relation to the origin of life on the early Earth. The effect on ferrocyanide exchange of concentration, pH, reaction time and cations are discussed. It was found that there were two different kinds of ferrocyanide species: one was that intercalated into the layered structure, occupying a site of D symmetry within the LDHs, while in the other, the ferrocyanide group retains full O symmetry. In addition, very low concentration, ferrocyanide associated with LDH will change its FTIR absorption shape. Carbonate was much more strongly intercalated than ferrocyanide into the LDHs, probably because of the strong hydrogen bonding.

Dissertation research involves development of Mobile Order Theory thermodynamic models to mathematically describe and predict the solubility, spectral properties, protonation equilibrium constants and two-phase partitioning behavior of solutes dissolved in binary solvent mixtures of analytical importance. Information gained provide a better understanding of solute-solvent and solvent-solvent interactions at the molecular level, which will facilitate the development of better chemical separation methods based upon both gas-liquid and high-performance liquid chromatography, and better analysis methods based upon complexiometric and spectroscopic methods. Dissertation research emphasizes chemical equilibria in systems containing alcohol cosolvents with the understanding that knowledge gained will be transferable to more environmentally friendly aqueous-organic solvent mixtures.

Experimental mole fraction solubilities of benzil, thianthrene, trans-stilbene, thioxanthen-9-one, diphenyl sulfone and dibenzothiophene sulfone are determined in pure noncomplexing and complexing solvents. Predicted solubility values are calculated for benzil, thianthrene, trans-stilbene and thioxanthen-9-one using expressions derived from Mobile Order theory. Large deviations between experimental and predicted solubilities in alcohol solvents exist, therefore optimized solute - solvent association constants are determined. Previously measured thianthrene solubilities in five binary alkane + cyclohexane solvent mixtures are compared with values predicted from Mobile Order theory using the measured solubility in each of the pure solvents as input parameters. The experimental mole fraction solubility of benzil in eight binary alcohol + 1-octanol solvent mixtures are also measured and compared with predicted values.

Sulfur adsorbed on metallic and oxide surfaces, whether originating from gaseous environments or segregating as an impurity to metallic interfaces, is linked to the deterioration of alloy performance. This research dealt with investigations on the interactions between sulfur and iron or iron alloy metallic and oxide surfaces under ultrahigh vacuum conditions. Sulfur was either intentionally dosed from a H2S source on an atomically clean metal surface, or segregated out as an impurity from the bulk to the metal surface by annealing at elevated temperatures.