The characteristics of seventy-six calix[4]arene crystal structures derived from the Cambridge Crystallographic Database are presented. This survey is a discussion of the inter and intramolecular effects on the solid state cavity shape and molecular recognition ability of the compounds. In addition to this survey, four new calix[4]arene crystal structures are presented. The conformational characteristics of these four calixarenes are determined by a complicated array of inter and intramolecular interactions in the crystal packing.

The tricobalt cluster PhCCo₃(CO)₉ (1) reacts with the bidentate phosphine ligand 2,3-bis(diphenylphosphino)maleic thioanhydride (bta) with added Me₃NO to yield PhCCo₃(CO)₇(bta) (2), which upon heating overnight yields Co₃(CO)₆(μ₂-η²,η¹-C(Ph)C=C(PPH₂)C(O)SC(O)) (μ₂-PPh₂) (3). Cluster (3) has been isolated and characterized by FT-IR and ³¹P NMR spectroscopy. Structural determination of the cluster has been demonstrated by X-ray diffraction analysis. Cluster (3) is analogous to the cluster synthesized by Richmond and coworkers. The redox properties of (3) have been examined by cyclic voltammetry and the data are reported within.

Exchange reactions of anions, especially ferrocyanide and carbonate, with layered double hydroxides (LDHs) were investigated in relation to the origin of life on the early Earth. The effect on ferrocyanide exchange of concentration, pH, reaction time and cations are discussed. It was found that there were two different kinds of ferrocyanide species: one was that intercalated into the layered structure, occupying a site of D symmetry within the LDHs, while in the other, the ferrocyanide group retains full O symmetry. In addition, very low concentration, ferrocyanide associated with LDH will change its FTIR absorption shape. Carbonate was much more strongly intercalated than ferrocyanide into the LDHs, probably because of the strong hydrogen bonding.

This study examines the waste of cotton gins as a potential alternative energy source, on account of its heat content, availability, and low emission rates. To confirm that this potential energy source meets minimum industrial fuel standards, this research has carried out an investigation of some important physical characteristics and toxic element analysis of cotton gin waste. Using cotton gin waste as fuel is an attractive solution to the problems of disposing of a surplus agricultural waste as well as supplementing fuel must meet both environmental emission standards and industrial fuel standards, the physical and chemical characteristics of cotton gin waste and its toxic element concentrations are important for its objective evaluation as a fuel. Constituent components, moisture contents, and ash contents of four separate parts of cotton gin waste were determined and evaluated closely following the American Society for Testing and Materials (ASTM) test methods. The three most toxic heavy metals, Arsenic (As), Chromium (Cr), and Lead (Pb), chosen for quantitative analysis were determined by using an inductively coupled plasma atomic emission spectrometry and a microwave oven sample digestion method.

This work concerns some synthetic processes and basic properties of layered double hydroxides (LDHs). A series of LDHs, a family of newly developed materials found to have many potential uses in industry, were investigated in relating to the origin of life on early Earth. In this work, I successfully intercalated some inorganic as well as organic species. Ammonium, accompanied with ferrocyanide ion, can enter the layered space. It was found there were two kin go f intercalated ferrocyanide species: one is that exchanged with anions and became a part of layered double hydroxide, while the other is suggested to be related to ammonium ferrocyanide neutral species. Formaldehyde, ethanolamine and formate can also be involved into LDHs. To improve the crystallinity, homogeneous precipitation method, which used Urea and Hexamine, was employed. The results reveal the success in the case by Urea but not in that by Hexamine. Annealing could also be used for this purpose. However, it needs to be preocessed in its mother liquor; no improvement on the crystallinity if the material has been washed before annealing.

Reaction of the tetracobalt cluster Co4(CO)10(t 4-PPh)2 with 1,2-bis(dimethylphosphino)ethane (dmpe) affords the bis-substituted cluster Co4(CO)8(dmpe)(t 4-PPh)2. The bidentate dmpe ligand is shown to bind to the cluster in a chelating fashion by IR, NMR, and X-ray diffractions analyses. The fluxional nature of the ancillary carbonyl groups has been studied by variable temperature 13C NMR measurements which reveal two distinct carbonyl scrambling pathways. The stability of the phosphine-ligated cluster has been examined using in situ Cylindrical Internal Reflection (CIR) Spectroscopy. The effect of the dmpe ligand on the cluster polyhedron will be discussed with respect to the observed crystallographic and spectroscopic results

Small weight percentages of certain high-molecular weight polymers added to liquids in turbulent flow through conduits can result in dramatic friction reduction. Although many current and potential uses of the drag reduction phenomenon exist, there is a fundamental problem: drag reduction efficacy decreases rapidly with flow time due to the mechanical degradation in flow of the added polymer. In this thesis study, dilute aqueous solutions of polyacrylamide were tested under turbulent flow conditions in an attempt to determine where mechanical degradation in flow occurs.

Diels-Alder [4+2] cycloaddition of a mixture of 1- and 2 methylcyclopentadiene to 2-phenyl-g.-benzoquinone affords a mixture of four nd cycloadducts. A single, isomerically pure cycloadduct was isolated by careful column chromatography. Stereospecific reduction of this material with sodium borohydride and cerium(III) chloride 'affords a single, isomerically pure tricyclic diol. The structures of the cycloadduct and this tricyclic diol, established via analysis of their one- and two-dimensionial NMR spectra, were shown to be (1-methyl-5-phenyltricyclo[6.2.1.02,7]undec a-4,9 diene-3,6-dione and 1-methyl-5-phenyltricyclo[6.2.1.0 2 ,7 ]undeca-4,9-diene t.&A-3-=.a-6-diol), respectively. Intramolecular [2+2] photocyclization of this tricyclic diol afforded the corresponding cage diol, 3-methyl-7phenylpentacyclo[5.4.0.0 2 ,6 .03 , 1 0 .05, 9 ]undecane-.exogxa-8,11-diol. Oxidation of this cage diol with pyridinium chlorochromate in dry dichloromethane afforded a single, isomerically pure cage hydroxyketone, 3-methyl-7 phenylpentacyclo[5.4.02,6.03,l .1519]undecane-xA-8-ol-II-one, whose structure was established by single crystal X-ray crystallographic methods.

The growth of strontium sulfate precipitate by diffusion in various gels was studied by using optical transmission and confocal microscopies, scanning and transmission electron microscopies, and energy dispersive X ray fluorescence. Pure silica gel, pure agarose gel and the silica/agarose mixed gel at pH 7 - 10 were used throughout the present study. Precipitate morphology is sensitive to pH and to the nature of the growth medium. The morphology was observed as a function of time. The lack of change is presumably because of rapid depletion of the limiting reagent after the very beginning of precipitation. The problem of separating strontium sulfate precipitate from the gel medium is discussed.

Evidence is reported for the formation of carbon-containing contamination products at the copper-tungsten (Cu-W) interface during the metal organic chemical vapor deposition (MOCVD) of copper on tungsten. Cu(II)bishexafluoroacetylacetonate [Cu(hfac)_2] was physisorbed onto lightly oxidized tungsten (WO_x) at 115K, under ultra-high vacuum conditions, and then annealed sequentially to higher temperatures. Copper reduction was observed by 320K. Carbonaceous and carbidic contamination of the WO_x surface was observed, even after sample warming to 625K in UHV. The results indicate that low temperature MOCVD of Cu may be possible, but interfacial contamination from the organic ligand fragmentation is a major concern.

Excess molar volumes have been determined for four ternary chlorobenzene + dibutyl ether + alkane mixtures at 25°C. Results of these measurements are used to test the applications and limitations of BAB, Redlich-Kister, Kohler and Hwang et al. cubic models. For the systems studied, Redlich- Kister, Kohler and Cubic models were found to provide reasonable predictions. Differences between experimental and predicted ΔV^ex_123 values were about ±0.020 cm^3mol^-1 or less at most ternary compositions. Solubilities are reported for anthracene in binary mixtures containing propanol and butanol with alkanes at 25°C. Results of these measurements are used to test the NIBS/Redlich-Kister expression. The three-parameter form of this expression is found to provide reasonable mathematical representation with deviations between experimental and back-calculated values being less than ±1%.

Diels-Alder cycloaddition of methylcyclopentadienes to 2,5-dibromo-p-benzoquinone was performed. A single, isomerically pure cycloadduct was isolated, whose structure was assigned via analysis of its 1-D and 2-D NMR spectra. Diels-Alder cycloaddition of methylcyclopentadienes to 2 -methoxy-p-benzoquinone was performed. A single, isomerically pure cycloadduct was isolated, whose structure was assigned via analysis of the 1-D and 2-D NMR spectra of this cycloadduct and its reduction product obtained via stereo-specific reduction with sodium borohydride in the presence of cerous chloride. The structure of Thiele's ester was assigned via analysis of its 1-D and 2-D NMR spectra.

Extended Hückel methods are known to be a useful tool in understanding surface phenomena. Important quantities about atoms and chemical bonds can be obtained from this computationally simple method, although caution must be exercised in interpreting the results. Application of Extended Hückel calculations to large metal clusters reveals the role of d orbitals in solids. Basic ideas of constructing model compounds have been developed. Several model systems for surface chemisorption processes are constructed in order to understand the surface catalyzed oxidative degradation of polyperfluoroethers. The activation of oxygen molecules can be explained. The Lewis acid character of the iron fluoride surface can be predicted. Based on these results, mechanisms of the degradation processes are discussed.

As the miniaturization keeps decreasing in semiconductor device fabrication, metal contamination on silicon surfaces becomes critical. An investigation of the fundamental mechanism of metal contamination process on silicon surface is therefore important. Kinetics and thermodynamics of the copper out-plating process on silicon surfaces in diluted HF solutions are both evaluated by several analytical methods.

I. Reductive dimerization of pentacyclo[5.4.0.0.^2,6.0^3,10.0^5'9]undecane-8-one-(PCU-8-one, 53) affords a mixture of meso and d,l pinacols (55a and 55b respectively). Acid promoted rearrangement of 55a and 55b conceivably can proceed with migration of C(7)-C(8) and/or C(8)-C(9) to form the corresponding pinacolone(s). In our hands, acid promoted rearrangement of 55a and 55b each proceeds with exclusive migration of C(7)- C(8) bond, thereby affording 58a and 59a respectively. Mechanistic features of this rearrangement are discussed. II. 4,7,1 l-trimethylpentacyclo[6.3.0.0.^2,6.0^3,l0.0^5,9]undecane-exo-4,exo-7-diol (23a) was successfully synthesized. This diol crystallizes in a helical tubuland lattice although its molecular structure does not possess C2 rotational symmetry.

Spectrofluorometric probe methods are developed and examined regarding their ability to model preferential solvation around probe molecules in binary solvents. The first method assumes that each fluorophore is solvated by only one type of solvent molecule and that each fluorophore contributes to the emission intensity. Expressions for this model are illustrated using fluorescence behavior of pyrene, benzo[e]pyrene, benzo[ghi]perylene, and coronene dissolved in binary n-heptane + 1,4-dioxane and n-heptane + tetrahydrofuran mixtures. The second method treats the solvational sphere as a binary solvent microsphere, with the fluorophore's energy in both the ground and the excited states mathematically expressed using the "nearly ideal binary solvent" (NIBS) model. Expressions derived from this model are illustrated using fluorescence behavior of 9,9'-bianthracene and 9,9*-bianthracene-10-carboxaldehyde in binary toluene + acetonitrile and dibutyl ether + acetonitrile.

Nitroglycerin and isoamyl nitrate have been used as nitrovasodilators since the nineteeth century. However, not until recently has it been known that these compounds were useful since they promoted the release of NO in the body. More recently, a new class of drugs, NO donors, has been developed. These include S-nitrosothiols (RSNO), sydnonimines, and nucleophilic NO adducts.

Detection of ultratrace levels of metallic ion impurities in hydrofluoric acid solutions and alkaline hydrogen peroxide solution was demonstrated using a silicon-based sensing electrode. The sensor's operation principle is based on direct measurements of the silicon open-circuit potential shift generated by the interaction between metallic ions and the silicon-based sensing surface. The new sensor can have practical applications in the on-line monitoring of microelectronic chemical processing. The detection of Ag+ content in KODAK waste water was carried out successfully by this novel sensor. Trace levels of organic impurities in the hydrofluoric acid solutions and in the cleanroom air were characterized by multiple internal reflection infrared spectroscopy (MIRIS) using an organics probe prepared directly from a regular silicon wafer.

Palladium catalyzed reactions of derivatives of 2,4-diiodophenol are explored. Coupling reactions with a series of terminal alkynes and formylation are found to be efficient and regioselective. Coupling with stananne reagents and alkenes do not work. The nature of the oxygen protecting group is critical. The phytotoxic natural product, Eutypine, is synthesized by using regioselective formylation and alkyne coupling. An approach to the plant antimicrobial compound Plicatin B is examined.

Mixed alkyllithium / lithium alkoxide aggregates in the form (RLi)n(ROLi)m were formed by addition of corresponding alcohol compounds at different Li/O ratios. Variable temperature 13C and 6Li NMR spectroscopy were used to verify the formation of the mixed aggregates and to study their behavior in hydrocarbon solution. Spectra for the lithium n-propoxide / n-propyllithium and iso-butyllithium / lithium iso-butoxide systems each indicated at least one mixed aggregate.

I. Diels-Alder reactions of 1,2,3,4,9,9-hexachloro-1,4,4a,8a-tetrahydro-1,4-metha- nonaphthalene (16) and 1,2,3,4,9,9-hexachloro-1,4,6,7-tetrahydro-1,4-methanonaphthalene (17) toward dienophiles N-methyl-1,2,4-triazoline-3,5-dione (MTAD), N-phenyl-1,2,4-triazoline-3,5-dione (PTAD) and/or N-methylmaleimide (NMM) have been examined. II. Epoxides derived from functionalized 1,4,4a,9a-tetrahydro-9,10-dioxo-1,4-methanoanthracenes (1a and 1b) undergo acid- and base-promoted intramolecular nucleophilic ring-opening to form new polycyclic alcohols. III. The title cycloalkylidenecarbene has been generated via reaction of 8-methylenepentacyclo[5.4.0.0^{2,6}.0^{3,10}. 0^{5.9}]undecan-11-one (44) with diethyl diazomethyl-phosphonate (DAMP). This species could be trapped in situ by cyclohexene, thereby affording the corresponding cycloadduct 46a and 46b.

The syntheses of the unsymmetrical 14-membered bismacrolides have been reviewed. A total synthesis of clonostachydiol, the latest to join this family, has been attempted using trimethylsilyl acetylene as the builiding block and palladium catalyzed reactions for the formation of key bonds. The alkyne groups were introduced by Stille coupling of trimethylstannylethynyltrimethylsilane with an acid chloride for one fragment and by addition of lithiotrimethylsilyl acetylene to an aldehyde for the other. Lactic acid derivatives were chosen as starting materials for both fragments, thus introducing two of the chiral centers. The remaining stereocenters were introduced using stereoselective reductions of ketones.

Experimental mole fraction solubilities of benzil, thianthrene, trans-stilbene, thioxanthen-9-one, diphenyl sulfone and dibenzothiophene sulfone are determined in pure noncomplexing and complexing solvents. Predicted solubility values are calculated for benzil, thianthrene, trans-stilbene and thioxanthen-9-one using expressions derived from Mobile Order theory. Large deviations between experimental and predicted solubilities in alcohol solvents exist, therefore optimized solute - solvent association constants are determined. Previously measured thianthrene solubilities in five binary alkane + cyclohexane solvent mixtures are compared with values predicted from Mobile Order theory using the measured solubility in each of the pure solvents as input parameters. The experimental mole fraction solubility of benzil in eight binary alcohol + 1-octanol solvent mixtures are also measured and compared with predicted values.

Conversion of 1-Methylpentacyclo[5.4.0.0²⋅⁶.0³⋅¹⁰.0⁵⋅⁹]undecane- 8,11-dione into the corresponding mono(ethylene ketal) followed by Wolff-Kishner reduction resulted in a mixture of two isomers (i.e., 1- and 7-methyl-8-[2',-(1',3',dioxolano)]pentacyclo[5.4.0.0²⋅⁶.0³⋅¹⁰.0⁵⋅⁹] undecane. Hydrolysis of each isomer in turn resulted in 1- and 7- methyl pentacyclo[5.4.0.0²⋅⁶.0³⋅¹⁰.0⁵⋅⁹ ]undecan-8-ones (i.e.,"methylated PCU-8-ones"), respectively. "Titanium-promoted reductive dimerization of each of the methylated pentacycloundecane (PCU)-8-ones afforded mixtures of "methylated PCU alkene dimers". Individual isomers have been isolated from these mixtures via column chromatography by using silver nitrate impregnated silica gel as adsorbent followed by fractional recrystallizations of individual chromatography fractions. Structures of three isomerically pure methylated PCU alkene dimers (C₂₄H₂₈) have been established unequivocally by application of single crystal X-ray crystallographic methods.