Photograph of a schematic for a studio camera control. There is a title at the bottom right corner of the page that reads "Figure 12. Schematic Diagram, Studio Camera Control". In the bottom center of the page is text that reads "Notes 1. Unless Otherwise Specified All resistance values in ohms - 1 watt. All capacitance values in microfarads. 2. Tube numbers refer to numbers stamped on chassis near tubes with tube designation. 3. Clockwise rotation. 4. Coaxial cable RG 62U". There are three rows on the schematic and there is a circle on the lower right side of the page that is labeled a "camera receptacle". The sections of the rows are labeled with the letter "V" which is followed by a number and a phrase that describes the function of the section.

Photograph of schematics for a switchlock. At the bottom right corner of the schematics is a title that reads "Figure 48- Switchlock Functional Block Diagram (Including Capstan Servo Modifications)". There are two separate blocks on the diagram, the top block is labeled "Capstan Servo Chassis (Unit 404)" while the bottom block is labeled "Switchlock Chassis". Both of the chassis have smaller rectangles in them that are labeled with their functions. The bottom chassis is broken up into five sections that are labeled "Tape Sync Processor Module" "Switchlock Module" "Frame" "Power 1 Module" and "Power 2 Module".

Photograph of a schematic for a power supply. There is a title at the bottom right corner of the page that reads "Figure 63. Schematic Diagram Field Power Supply (T-618700 - Sub 13)". There is text above this that reads "1 Indicate Terminal Board Numbers for T1 All resistance values in ohms & 1 watt rating and all capacitance values in MFD, unless otherwise specified. Voltages shown are at normal operating conditions at full load. CW clockwise rotation tube number refer to corresponding numbers stamped on chassis near tubes with tube designation." There are three main blocks of the schematic that are connected by lines. The different sections of these blocks are labeled by the letter "V" with a number after it and the components in these sections are labeled with a combination of letters and numbers.

Photograph of schematics for a clamper amplifier. In the title box in the corner is text that reads "Telemet Company Amityville, N.Y. Clamper Amplifier Schematic Model 3203A1 Drawn By T.D. Date 5/20/63".

Photograph of schematics for a sync lock. In the title box in the bottom right corner of the image is text that reads "Sync Lock Schematic Diagram Model 3513-A1 D1202499 Rev. 3 Sheet 2 of 2". There are three rows of circuits in the diagram, and the individual circuits in each row are labelled with a combination of letters and numbers. Above the top row and below the middle and bottom rows are words such as "Emitter Follower" "Pulse Amplifier" "Inverter" and "Integrator", among others, to label the function of each section.

Photograph of a schematic for a field switching system. There is a title in the bottom right corner that reads "Figure 62. Schematic Diagram, Field Switching System (T-617838 - Sub 4)". Above this is text that reads "Unless otherwise specified: all resistance values in ohms - 1 watt. All capacitance values in microfarads. Tube number refer to corresponding numbers stamped on chassis near tubes with tube designation. Clockwise rotation of variable". There are three rows on the schematic and the sections in the rows are labeled with the letter "V" followed by a number and a word or phrase that describes the function of the section.

Photograph of a schematic for a film camera. There is a title in the bottom right corner that reads "Figure 26. Schematic Diagram, Field Camera (W-305926 - Sub 7). The schematic has four rows of circuits and other components, and the sections of each row are labeled with the letter "V" and a number and a word that describes the section's function.

Photograph of schematics for circuits. The title box in the bottom right corner of the schematics reads "Sync Lock Schematic Diagram Model 3513-A1 D1202499 ..." and the box is surrounded by white paint. At the bottom of the middle of the sheet is a section of notes which reads "1. All resistors in ohms rated at 1/4 watt unless otherwise noted 2. All capacitors 1.0 or above in μμf unless otherwise noted and all capacitors below 1.0 in μf". There are two rows of circuits on the diagram and each of the individual components of the rows are labelled with a combination of numbers and letters. Above the top circuit and below the bottom circuit are words such as "Sawtooth Generator" "Phase Detector" "Power Supply" and "Sync Indicator" that label the functions of the sections. There are circles in the middle of the circuits at triangular shaped points.

Photograph of schematics for a field pulse former. In the bottom right corner of the schematic is a title that reads "Figure 47 Schematic Diagram, Field Pulse Former (T-618734 - Sub 10)". There are three rows of circuits on the schematic and each individual circuit is labeled with a combination of letters and numbers. Each section is labeled with a "V" and a number and there are words under these labels to describe the function of the section.

Photograph of schematics for a sync generator. In the bottom right corner of the image is a title box with the words "EIA Sync Generator" along with a model number that is illegible. Next to the title is a box that says "Telechrone Mfg. Corp". There are five rows of circuit on the schematic and the individual circuits in each row are labelled with a combination of letters and numbers.

Photograph of a schematic for a view finder. In the bottom right corner of the schematic is a title that reads "Figure 27. Schematic Diagram, View Finder (T-619256 - Sub 5)". To the left of this in the center of the bottom of the page is text that reads "Notes All resistance values in ohms & 1 watt. All capacitance value in MFD; unless otherwise specified." There are three rows of circuits on the page and the sections on the rows are labeled with the letter "V" and a number. The individual circuits and components are labeled with a combination of letters and numbers. On the right of the circuits is a funnel shape that is labeled "12 5FP4A Kine".

Photograph of a schematic for a field pulse shaper. There is a title in the bottom right corner of the schematic that reads "Figure 48. Schematic Diagram, Field Pulse Shaper (W-308120 - Sub 5)". In the bottom left corner of the schematic is more text that reads "Notes- All resistance values in ohms - 1 watt & capacitance values in micro-farads unless indicated otherwise. Tube numbers refer to corresponding numbers stamped on chassis near tubes with tube designation. Clockwise rotation of variable resistors." There are four rows on the schematic and the sections of the rows are labeled with the letter "V" and a number and a word that describes the function of the section.

Photograph of a schematic for a field camera control. There is a title at the bottom right corner of the page that reads "Figure 28. Schematic Diagram, Field Camera Control (W-302986 - Sub 10)". There are four rows on the schematic and the sections on these rows are labeled with a "V" and a number and have a word or phrase that describes the section's function.

Photograph of a diagram of a linelock. There is a title in the bottom right corner of the diagram that reads "Figure 49 - Linelock Functional Block Diagram". The diagram features six blocks that are each labeled and the labels are "Linelock", "Frame", "Modulator", "Tone Wheel Phase", "Tone Wheel Velocity", and "Pulse Processor". Inside these blocks are smaller rectangles that are labeled with their functions.

Photograph of schematics for a circuit board. There is no title on the page and there are four rows of circuits that are labeled "Relay", "Cam. Control 1", "Cam. Control 2", "Cam. Control 3", "Cam Control 4", and "Prod". There are two vertical rows of circuits on the right side of the board and then there is a rectangular component under these.

Photograph of Jane McGarry posing in an office. She sits at a desk, holding up a pencil in one hand, and looks towards the camera with a small smile. She wears a plaid suit jacket with a large white collar.

Photograph of NBC 5 news anchor Jane McGarry posing in an office. She sits at a desk, holding some papers in her hands, and looks towards the camera with a wide smile. She wears a long-sleeved blouse with metallic buttons and a necklace.

Photograph of a portrait of NBC 5 news anchors Jane McGarry and Mike Snyder posing in front of a solid backdrop. Jane stands on the left. She has short brown hair and wears a red suit jacket with large, metallic earrings. Mike stands to the right, wearing a black suit with a colorful, patterned necktie. They both smile at the camera.

Photograph of Jett Jamison smiling. He is wearing a business suit with a patterned tie. In the background is a curtain.

Photograph of schematics for a circuit board. In the bottom right corner of the image is a title that reads "Figure 22 - Schematic Diagram, TG-2A, TG-12A,Sync Generators (363995, Sub 3)". There are four rows of circuits and in between the rows are words such as "Clipper" "Regulator" "Rectifier" and "Genlock Relay", among others, to label the functions of the sections. The individual circuits are labeled with combinations of letters and numbers.

Photograph of WBAP-TV meteorologist, Scott Chesner, posing for a portrait. He holds a weather map and pen in his hands and looks up at the camera with a smile. He wears a striped dress shirt, a floral-patterned necktie, and dark slacks. Several maps hang up on the wall behind him.

Photograph of a portrait of Jane McGarry and Mike Snyder posing in front of a solid backdrop. Jane stands on the left. She has short brown hair and wears a red suit jacket with large metallic earrings. Mike stands to the right, wearing a black suit with a colorful patterned necktie. They both smile at the camera.

A headshot of NBC 5 news anchor Mike Snyder sitting in front of a backdrop. He wears a dark suit jacket, a white dress shirt, a pocket square, and a patterned necktie. He smiles widely at the camera.

Photograph of WBAP-TV meteorologist, David Finfrock, posing for a portrait in front of a map. He wears glasses, a dark suit jacket, a dress shirt, and a patterned tie. He has short, dark hair and a mustache.