Degree Department

Degree Level

6,284 Matching Results

Results open in a new window/tab.

Use of molybdenum ion source electrodes at RTNS-II (open access)

Use of molybdenum ion source electrodes at RTNS-II

Reports are reported for an ongoing effort to optimize D+ beam production by the MATS-III ion source used at RTNS-II. The three seven-aperture electrodes, originally consisting of water-cooled copper, have now been tested using uncooled molybdenum and with water cooling on the second (decel) electrode only. Details of the change, the results of the testing, and the benefits in operation, performance and cost are given.
Date: September 29, 1986
Creator: Massoletti, D.J.; Harter, G.A. & Heikkinen, D.W.
Object Type: Article
System: The UNT Digital Library
Structure functions: Their status and implications (open access)

Structure functions: Their status and implications

I discuss the current status of structure functions. Attention is given to the uncertainties in them and the implications of these uncertainties for experimental predictions. I indicate which experiments are capable of removing these uncertainties. 17 refs., 17 figs., 1 tab.
Date: September 29, 1988
Creator: Hinchliffe, I.
Object Type: Article
System: The UNT Digital Library
Top quark and light Higgs scalar mass bounds in no-scale supergravity (open access)

Top quark and light Higgs scalar mass bounds in no-scale supergravity

No-scale supergravity theories with the minimal low-energy particle content are shown to become untenable for a top quark mass m/sub T/ much less than 40 GeV. For m/sub T/ < 55 GeV, a stringent upper bound operates on the mass of the lowest-lying Higgs scalar. Further, the Higgs pseudoscalar is constrained to be nearly a quarter as massive as the gluino.
Date: August 29, 1986
Creator: Roy, P.
Object Type: Article
System: The UNT Digital Library
Oxide cathode lifetime improvements at RTNS-II (open access)

Oxide cathode lifetime improvements at RTNS-II

Results are reported for an ongoing effort to optimize D/sup +/ beam production by the MATS-III ion source used at the RTNS-II. The oxide cathode assembly originally designed for lower power operation has been modified and redesigned for higher electron current yield, longer life and serviceability. A factor of 2.5 has been gained in cathode lifetime due to these changes. The details of the changes and results and benefits in operation and performance are given. In addition, the technique used for manufacture of the filament is described.
Date: September 29, 1986
Creator: Massoletti, D.J.
Object Type: Article
System: The UNT Digital Library
Method and apparatus for injecting a substance into the bloodstream of a subject (open access)

Method and apparatus for injecting a substance into the bloodstream of a subject

An apparatus and method for injecting a substance, such as a radiopharmaceutical, into the bloodstream of a subject is described. The apparatus comprises an injection means, such as a servo controlled syringe, a means for measuring the concentration of that substance in the subject's bloodstream, and means for controlling the injection in response to the measurement so that the concentration of the substance follows a predetermined function of time. The apparatus of the subject invention functions to inject a substance into a subject's bloodstream at a rate controlled by an error signal proportional to the difference between the concentration of the substance in the subject's bloodstream and the predetermined function.
Date: May 29, 1981
Creator: Lambrecht, R. M.; Bennett, G. W.; Duncan, C. C. & Ducote, L. W.
Object Type: Patent
System: The UNT Digital Library
Tested method to minimize plutonium assay discrepancies between laboratories (open access)

Tested method to minimize plutonium assay discrepancies between laboratories

Plutonium assay differences are frequently observed between laboratories exchanging plutonium dioxide powders. These differences are commonly the result of chemical changes and/or nonhomogeneities in sampled materials. The irregularities are often caused by moisture absorption during sampling, packaging, shipment, and storage of the materials. A method is proposed which eliminates the effects of chemical change in samples, particularly moisture absorption, and minimizes sampling error. A nondestructive thermal watts/gram test on every preweighed sampled and total dissolution of these samples for chemical assay are the primary features which make this method effective. Because this method minimizes the error related to exchange material, it is possible to design an interlaboratory exchange program which demonstrates the assay capabiliies of the participants. In an experiment performed to demonstrate the effectiveness of this method, three PuO/sub 2/ batches of varying isotopic composition were synthesized at Mound to be used in the exchange tess. Powder sample aliquots from each batch were weighed directly into their vials under controlled atmospheric conditions. Calorimetric heat measurements were made on each vial to test homogeneity and verify sample weight. Six vials of each batch were chemically assayed at Mound and six at NBL (New Brunswick Laboratory). Both laboratories chose controlled-potential coulometry …
Date: January 29, 1982
Creator: Seiler, R. J.; Goss, R. L.; Rodenburg, W. W. & Rogers, D. R.
Object Type: Report
System: The UNT Digital Library
Reasons for the termination of, and DOE losses in, a geothermal demonstration powerplant project (open access)

Reasons for the termination of, and DOE losses in, a geothermal demonstration powerplant project

The 50-megawatt Baca geothermal demonstration powerplant project, located in northern New Mexico, was the Department of Energy's (DOE's) initial effort to demonstrate geothermal powerplant technology. The project, started in 1978, was believed to have a high probability of success, and its cost was to be shared equally with the industry participants. GAO's review showed that the project was terminated in January 1982 because sufficient geothermal steam to operate the powerplant could not be obtained. The early termination resulted in DOE paying a disproportionate share - $45 million, or 64% - of the $70 million spent on the project because it had paid the majority of the powerplant-related costs at that time. However, a portion of these costs may be recovered through the sale of powerplant equipment. DOE indicated that it learned lessons from this experience and will act to prevent these problems from occurring on other projects.
Date: September 29, 1983
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Production of super-smooth articles (open access)

Production of super-smooth articles

Super-smooth rounded or formed articles made of thermoplastic materials including various poly(methyl methacrylate) or acrylonitrile-butadiene-styrene copolymers are produced by immersing the articles into a bath, the composition of which is slowly changed with time. The starting composition of the bath is made up of at least one solvent for the polymer and a diluent made up of at least one nonsolvent for the polymer and optional materials which are soluble in the bath. The resulting extremely smooth articles are useful as mandrels for laser fusion and should be useful for a wide variety of other purposes, for example lenses.
Date: May 29, 1981
Creator: Duchane, D. V.
Object Type: Patent
System: The UNT Digital Library
Documentation of Volume Three of the 1978 Energy Information Administration Annual Report to Congress (open access)

Documentation of Volume Three of the 1978 Energy Information Administration Annual Report to Congress

The purpose of the ARC78 forecasts and the ways in which they differ from those in the ARC77 are discussed. In a preliminary overview of the projection process, the relationship between energy prices, supply, and demand is addressed. Topics treated in detail include a description of energy-economic interactions, assumptions regarding world oil prices, and energy modeling in the long term beyond 1995. Subsequent sections present the general approach and methodology underlying the forecasts, and define and describe the alternative projection series and their associated assumptions. Short-term forecasting, midterm forecasting, long-term forecasting of petroleum, coal, and gas supplies are included. The role of nuclear power as an energy source is also discussed.
Date: February 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Modular OTEC platforms, SKSS designs. Volume I. Executive summary. Final report (open access)

Modular OTEC platforms, SKSS designs. Volume I. Executive summary. Final report

One of the possible options for generating electrical energy from ocean thermal gradients requires the use of a floating offshore platform. The platform would contain all OTEC (Ocean Thermal Energy Conversion) systems and power cycle components and consist of the hull, seawater, station-keeping, platform service, and mission support subsystems. It would be stationed at one of the designated OTEC sites, and would transmit the generated electricity to the shore power networks by means of an electrical transmission cable. The objective of the present study is to investigate the station-keeping subsystem (SKSS) requirements and develop preliminary SKSS designs for the two Modular Experiment Plant (MEP) candidates of 10/40 MW/sub e/ capacity for deployment at a specific site. The two MEP hull candidates are a Barge type platform and a Spar shaped hull with external heat exchangers. The specific site assigned for this study is Puerto Rico. The preliminary SKSS designs are developed for both platforms as follows: (1) an 8-leg spread catenary mooring system for the Spar, and (2) a 12-leg spread catenary mooring system for the Barge. Applicability of these designs to larger capacity commercial OTEC platforms is also investigated.
Date: February 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Overview of radioactive waste management (open access)

Overview of radioactive waste management

The question of what to do with radioactive wastes is discussed. The need to resolve this issue promptly is pointed out. Two significant events which have occurred during the Carter administration are discussed. An Interagency Review Group (IRG) on waste management was formed to formulate recommendations leading to the establishment of a National policy for managing radioactive wastes. The technical findings in the IRG report are listed. The author points out some issues not addressed by the report. President Carter issued a national policy statement on Radioactive Waste Management in February 1980. The most significant elements of this statement are summarized. The cancellation of the Waste Isolation Pilot Plant is currently meeting opposition in Congress. This and other items in the National Policy Statement are discussed.
Date: May 29, 1980
Creator: Ritter, G.L.
Object Type: Article
System: The UNT Digital Library
Conceptual designs for modular OTEC SKSS. Final report (open access)

Conceptual designs for modular OTEC SKSS. Final report

This volume presents the results of the first phase of the Station Keeping Subsystem (SKSS) design study for 40 MW/sub e/ capacity Modular Experiment OTEC Platforms. The objectives of the study were: (1) establishment of basic design requirements; (2) verification of technical feasibility of SKSS designs; (3) identification of merits and demerits; (4) estimates of sizes for major components; (5) estimates of life cycle costs; (6) deployment scenarios and time/cost/risk assessments; (7) maintenance/repair and replacement scenarios; (8) identifications of interface with other OTEC subsystems; (9) recommendations for and major problems in preliminary design; and (10) applicability of concepts to commercial plant SKSS designs. A brief site suitability study was performed with the objective of determining the best possible location at the Punta Tuna (Puerto Rico) site from the standpoint of anchoring. This involved studying the vicinity of the initial location in relation to the prevailing bottom slopes and distances from shore. All subsequent studies were performed for the final selected site. The two baseline OTEC platforms were the APL BARGE and the G and C SPAR. The results of the study are presented in detail. The overall objective of developing two conceptual designs for each of the two baseline OTEC …
Date: February 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Technical evaluation report on the monitoring of electric power to the reactor-protection system for the Pilgrim Nuclear Power Station (open access)

Technical evaluation report on the monitoring of electric power to the reactor-protection system for the Pilgrim Nuclear Power Station

This report documents the technical evaluation of the monitoring of electric power to the reactor protection system (RPS) at the Pilgrim Nuclear Power Station. The evaluation is to determine if the proposed design modification will protect the RPS from abnormal voltage and frequency conditions which could be supplied from the power supplies and will meet certain requirements set forth by the Nuclear Regulatory Commission. The proposed design modifications will protect the RPS from sustained abnormal voltage and frequency conditions from the supplying sources.
Date: April 29, 1982
Creator: Selan, J.C.
Object Type: Report
System: The UNT Digital Library
Applications of small computers for systems control on the Tandem Mirror Experiment-Upgrade (open access)

Applications of small computers for systems control on the Tandem Mirror Experiment-Upgrade

Desktop computers operating into a CAMAC-based interface are used to control and monitor the operation of the various subsystems on the Tandem Mirror Experiment-Upgrade (TMX-U) at Lawrence Livermore National Laboratory (LLNL). These systems include: shot sequencer/master timing, neutral beam control (four consoles), magnet power system control, ion-cyclotron resonant heating (ICRH) control, thermocouple monitoring, getter system control, gas fueling system control, and electron-cyclotron resonant heating (ECRH) monitoring. Two additional computers are used to control the TMX-U neutral beam test stand and provide computer-aided repair/test and development of CAMAC modules. These machines are usually programmed in BASIC, but some codes have been interpreted into assembly language to increase speed. Details of the computer interfaces and system complexity are described as well as the evolution of the systems to their present states.
Date: November 29, 1983
Creator: Bork, R. G.; Kane, R. J. & Moore, T. L.
Object Type: Article
System: The UNT Digital Library
Control of beam dynamics in high energy induction linacs (open access)

Control of beam dynamics in high energy induction linacs

The Advent of laser-ion-guiding in the Advanced test Accelerator along with the development of accelerator cavities optimized with respect to beam breakup coupling impedence now make it possible to consider a new class of high current, high emergy linear induction accelerators. The control of the beam breakup and other instabilities by laser guiding and by various magnetic focusing schemes will be discussed along with the scaling laws for the design of such machines to minimize the growth of the beam breakup instability. Many linacs, particularly induction linacs are limited in performance by the beam breakup (BBU) instability. The instability is found in two forms. In the first form the accelerating cavities communicate with one another through interaction with the beam and through propagation of cavity fields through the accelerator structure. In the second form which is the more virulent of the two, the cavities couple to each other only through their interactions with the beam. It is this second form of PPU that will be discussed in this paper.
Date: July 29, 1986
Creator: Caporaso, G.J.
Object Type: Article
System: The UNT Digital Library
Minutes: ANSI Steering Committee on Solar Energy Standards Development (open access)

Minutes: ANSI Steering Committee on Solar Energy Standards Development

Minutes of the April 29, 1980, meeting of the American National Standards Institute steering committee on solar energy standards development are given. Attachments include correspondence from individuals and organizations which primarily describe the Solar Public Interest Coordination Committee (SPICC) and its recent activities. Also a report on the meeting of the ANSI subcommittee on international activity is attached. (WHK)
Date: April 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Does the photino decay (open access)

Does the photino decay

The stability of the lightest superpartner is a crucial aspect of many experimental searches for supersymmetry and of supersymmetric dark matter candidates. It is shown that R parity may occur in operators of dimension four or less as an accidental consequence of an exact Z/sub N/ symmetry. In this case the lightest superpartner can decay via higher dimension operators. The lifetime depends on the scale of the new physics responsible for the non-renormalizable operators; it could be anywhere in the region 10/sup -20/ seconds to 10/sup +20/ seconds. Explicit examples are given. 12 refs.
Date: August 29, 1986
Creator: Hall, L.J.
Object Type: Article
System: The UNT Digital Library
Preliminary designs for modular OTEC platform station-keeping subsystems. Final report. MR and S Report No. 6042-6 (open access)

Preliminary designs for modular OTEC platform station-keeping subsystems. Final report. MR and S Report No. 6042-6

This volume of the report presents the results of the third through the sixth tasks of the Station Keeping Subsystem (SKSS) design studies for 10/40 MW/sub e/ capacity OTEC Modular Experiment platforms (MEP). Tasks 3 through 6 are: (3) complete preliminary designs for one SKSS for each of the two platforms (SPAR and BARGE); (4) development and testing recommendations for the MEP SKSS; (5) cost-time analysis; and (6) commercial plant recommendations. The overall conclusions and recommendations for the modular, as well as the commercial, OTEC platform station keeping subsystems are delineated. The basic design assumptions made during the process, the technical approach followed, and the results of design iterations, reliability and performance analyses are given. A complete description of the preliminary design SKSS concept is presented. The summary cost estimates for each of the alternative SKSS concepts considered are presented and a time schedule for the recommended concept is provided. The effects of varying some of the important parameters used in SKSS design on the performance and cost of the mooring system are investigated and results presented. The tests required and other developmental recommendations in order to verify and confirm the basic design assumptions are discussed. Finally, the experience gained …
Date: February 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library
Localized corrosion of steels in geothermal steam/brine mixtures (open access)

Localized corrosion of steels in geothermal steam/brine mixtures

Coupons of eight different carbon and chrome-moly alloy steels were exposed to high temperature, high salinity wellhead brine flow at a geothermal well in the Salton Sea Geothermal Field for periods of up to six months. The corrosion rate and corrosion attack morphology of each coupon was determined. Exposure time was a test variable and ranged from one month to six months. Test results indicate that carbon steels generally suffer high corrosion rates and are susceptible to severe localized attack which shows a mesa-canyon pattern. Chrome-moly alloy steels corrode at much lower rates and show an attack pattern of small shallow pits. With time, these pits grow mostly in the lateral direction. These results suggest that chrome-moly alloy steels offer significant improvement over carbon steels and that the disk-shaped pits are not likely to lead to rapid perforation.
Date: May 29, 1980
Creator: McCright, R. D.; Frey, W. F. & Tardiff, G. E.
Object Type: Article
System: The UNT Digital Library
Retro-fitting a house to take advantage of cool basement walls to reduce air conditioning cost. Final report (open access)

Retro-fitting a house to take advantage of cool basement walls to reduce air conditioning cost. Final report

Directions are given for a simple ventilation system to bring cool basement air to the living areas. Some results are given for electrical consumption for air conditioning before and after the retrofitting. (MHR)
Date: September 29, 1981
Creator: Williams, F. P.
Object Type: Report
System: The UNT Digital Library
TMX tandem-mirror experiments and thermal-barrier theoretical studies (open access)

TMX tandem-mirror experiments and thermal-barrier theoretical studies

This paper describes recent analysis of energy confinement in the Tandem Mirror Experiment (TMX). TMX data also indicates that warm plasma limits the amplitude of the anisotropy driven Alfven ion cyclotron (AIC) mode. Theoretical calculations show strong AIC stabilization with off-normal beam injection as planned in TMX-U and MFTF-B. This paper reports results of theoretical analysis of hot electrons in thermal barriers including electron heating calculations by Monte Carlo and Fokker-Planck codes and analysis of hot electron MHD and microinstability. Initial results from the TMX-U experiment are presented which show the presence of sloshing ions.
Date: July 29, 1982
Creator: Simonen, T. C.; Baldwin, D. E. & Allen, S. L.
Object Type: Article
System: The UNT Digital Library
Special topics reports for the reference tandem mirror fusion breeder. Volume 5. Neutronic issues and optimization (open access)

Special topics reports for the reference tandem mirror fusion breeder. Volume 5. Neutronic issues and optimization

More rigorous nuclear analysis, including the treatment of resonance self-shielding effects coupled with an optimization procedure, has resulted in improved performance of the Be/Li/Th blanket. Net U-233 breeding ratio has increased 36% (to 0.84) while at a U/Th ratio of 0.25 a/o energy multiplication has increased 12% (to 2.1) compared with earlier results.
Date: March 29, 1985
Creator: Lee, J. D. & Bandini, B. R.
Object Type: Report
System: The UNT Digital Library
CRBRP sodium fire tests. Quarterly technical progress report, October-December 1979 (open access)

CRBRP sodium fire tests. Quarterly technical progress report, October-December 1979

The objective of the small-scale group of tests is to demonstrate that sodium will drain from the surface of the fire suppression deck into the catch pan without interference during a spill event, and to demonstrate that burning is terminated following the spill event by the accumulation of combustion products inside the drain pipes. The results of this series of tests will be used to validate the catch pan fire suppression deck design concept based on the criteria that sodium will drain freely from the surface of the fire suppression deck and that burning is terminated in an acceptably short time (less than or equal to 36 h). The objective of the large-scale group of tests is to provide experimental data on the consequences of sodium spills using prototypic leak rates and to demonstrate the effectiveness of a large-scale fire suppression Q-deck assembly.
Date: February 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library
OTEC SKSS preliminary designs. Volume IV. Appendixes. Final report (open access)

OTEC SKSS preliminary designs. Volume IV. Appendixes. Final report

This volume contains appendices to the Station Keeping Subsystem design study for the 40 MeW Modular Experiment OTEC platforms. Appendices presented include: detailed drag calculations; sample CALMS computer printouts for SPAR and BARGE static analyses; sample time domain computer printouts (Hydromechanics, Inc.) program; extreme value and fatigue load calculations; anchor design calculations; deployment calculations; bottom slope plots; time domain analysis report by Hydromechanics Inc.; detailed cost analysis; control systems study report by Sperry Systems Management; cost estimates for model basin tests; and hydrodynamic loading on the mooring cables. (WHK)
Date: February 29, 1980
Creator: unknown
Object Type: Report
System: The UNT Digital Library