This memorandum presents a description of several additional miscellaneous HRT core maintenance tools, not in an earlier report (1). These tools were used in the removal of the cut up diffuser plates, probing the core wall, gauging the size of the holes, and other simple tasks. Function, design, and operation are described for the following items.

After shutdown heating rates have been calculated for the target, control plates, and the beryllium reflector of the HFIR. Hilvety previously calculated the after shutdown heating rates in the element and his results are reported in ORNL CP-60-4-110. Decay times of 1.0 10, 10^2, 10^3, 10^4, and 10^5 seconds have been considered, and heat fluxes have been computed for all of the mentioned components. The greatest heat fluxes were found to be at the surfaces of the control plates and the permanent beryllium reflector.

The ORNL analog computer was used to examine one aspect of a safety system for the EGCR. The thermal behavior of the fuel as a result of increases in reactivity at various power levels and gas flows was examined. Safety actions initiated by wither a flux-minus-flow signal or a reactor outlet gas temperature signal were included in simulation.

An analog simulation is made of the HRP in-pile slurry loop in the LITR. The radiolytic gas pressure in the pressurizer is determined. This pressure is a result of the generation of radiolytic gas in the loop core. A graphical result is obtained showing the effect of catalyst activity and pressurizer flow rate on the pressure rise from radiolytic gas. The thermal behavior of the system is studied, and the response to various controller settings is predicted. Controller settings very near optimum for the actual process were recommended from the analog study,

A stimulation study of the deign as of June 1960 of the gas-cooled ORR Loop No. 1 was made using the ORNL analog computer. The proposed method of temperature control is evaluated, and the dynamic behavior of the loop for accidents and component failures is presented in graphical form.

The first step in a proposed processing method for recovery of uranium from graphite-uranium fuels consists of oxidation of the fuel by oxygen to volatilize the carbon. Residue ash from the combustion step can be treated in a variety of ways to recover and purify the uranium. The combustion step may be caried out by contacting the solid fuel in a fixed or moving bed with a stream of oxygen-bearing gas in a tubular or annular reactor. Oxidizing gas may be introduced to the reactor at several points up the reactor and there may be continuous or intermittent addition of fresh fuel and removal of residue ash.

Five irradiated and five unirradiated wafers were analyzed. Each wafer was analyzed for samarium by emission spectrography. The unirradiated wafers were analyzed for uranium by coulometric and potentiometric methods and for uranium isotopes by mass spectrometry. The irradiated wafers were analyzed for uranium and plutonium by coulometric methods, for plutonium isotopes by the 256-channel alpha pulse analyzer, and for the isotopes of uranium and of plutonium by mass spectrometry. The methods of preparing wafers for analysis are discussed; the data are tabulated.

Oscillations have been observed in a magnetically supported cylindrical rod of plasma. This rod of plasma can be the discharge occurring in the defining aperture of a Mode II, pressure gradient arc. Similar oscillations can also occur in the column of a Mode I arc. These oscillations appear to be the mechanism that drives the Mode II blowup phenomena.

From the questions which have been asked, I gather that I am expected to bring you the news of the latest exciting developments in desalination at the Oak Ridge National Laboratory. However, the agenda for this meeting does not include reports of unfinished investigations; moreover, although there are some new ideas afoot at Oak Ridge, they are aimed toward the very large stations which are somewhat beyond the scope of the more current interests represented here. So instead of presenting new developments, I would like today to talk about where to look for them--to give you some purely analytical considerations that assess the incentives we have to seed certain improvements in this or that portion of the equipment in a dual-purpose station.

Technical report on the activities of the Oak Ridge National Laboratory Biology Division for the report period including a list of 346 publication and lectures and 205 short articles by members of the division on their research and activities.

The absorption in lead of Bremsstrahlung X radiation from a Sr^90 TiO3 pellet in the proximity of Hastelloy "C" was measured. The tenth value layer of the more energetic components of the X-ray continuum was determined to be 1.60 inches.

Test work was completed on development of a stripping method for the amine extraction (Amex) process which produces a concentrated uranyl nitrate solution for shipment to the refinery. This procedure offers potential cost savings by simplifying the overall mill-refinery flowsheet. The process involves treatment of the amine extract with calcium nitrate solution to convert the uranium in the solvent to a nitrate complex, stripping the uranium with water or dilute nitric acid, and recovery of nitrate from the solvent for recycle by contact with a lime slurry.

Studies are being made on the recovery of thorium (and uranium) from granitic rock, since this source represents a very large potential thorium reserve for the nuclear power industry. In preliminary leaching studies on 16 granite samples (containing 8-95 ppm thorium and 1.5-16 ppm uranium), maximum recoveries of thorium and uranium ranged 30-85% and 15-65% respectively, and sulfuric acid consumption was high (30-120 lbs H2SO4 per ton of granite). A relatively high acidity was needed to obtain rapid and efficient dissolution of the soluble thorium fraction. The cost of treating granite was estimated at $3.50-5.20 per ton, variations within this range being dependent primarily on differences in acid consumption for different granites. Estimated costs per pound of thorium plus uranium recovered ranged $30-500.

The thermophysical properties of Armco iron such as thermal conductivity, electrical resistivity, and Seebeck coefficient have been extensively investigated and reviewed up to 1000 degrees C. Few investigations of such properties have been made on high purity iron. If such a study is made using the same apparatus to determine the properties of two purity levels of iron, then several significant intercomparisons can be made which add meaning to data on a single material. The systemic errors for a single apparatus are the same, therefore comparison of a property of two similar materials is more significant. A comparison of the property changes with temperature and purity can show the effects of impurities on the mechanisms contributing to a property and allows prediction of the properties of iron as a function of purity. For these reasons a study was initiated on the high-purity iron for comparison to Armco iron.

This report is a working document of the UB AEC Nuclear Cross Sections Advisory Group and is issued about twice a year for the purpose of stimulating important cross section measurements. The requests listed in this report have originated from various Atomic Energy Commission contractors, the Advisory Committee on Reactor Physics, and the Nuclear Cross Sections Advisory Group. The distribution is limited to members of the US Nuclear Cross Sections Advisory Group (NCSAG), the US Advisory Committee on Reactor Physics (ACRP), the Tripartite Nuclear Cross Sections Committee (TNCC), the European-American Nuclear Data Committee (EANDC), to US AEC off-site contractors, and to the requestors and measurers of the cross sections listed in this report. The contents of this document are not to be republished in part or in full without special permission of the chairman of the NCSAG, The unpublished data which appear in this report must not be quoted in publications without permission of the experimenter.

This bibliography represents the first cumulative edit of the literature examined by the Radiation Shielding Information Center recently established at the Oak Ridge National Laboratory. Its two major sections consist of a list of documents by subject category and of an author index. The document list covers nine major subjects with a total of 118 categories; however, literature specimens have not yet been entered for all categories. If a document applies to more than one category, it is listed under each. The author index includes cross references to the categories under which each author's publications appear. Preceding the bibliography is a list of the subject categories, their corresponding category numbers and the pages on which they appear in the bibliography,

Methods for the noncorrosive removal of volatile fission products and UO2 dust from carbon steel and stainless steel have been developed. Procedures for applying these methods to the decontamination of the EGCR charge and service machines are described.

The purpose of this study was to investigate mathematically the concentration decrease due to particle deposition phenomena in highly concentrated monodispersed aerosols (mean particle size less than 1.0 mu) flowing through ventilation ducts. It was found that, from the standpoint of removal, the decrease in concentration due to deposition on duct walls was insignificant; but, when considering contamination on duct walls, the amount deposited, even though small when compared with the amount in the bulk stream, should not be overlooked.

The calculation of concentration transients caused by mixing in the interconnected three-body system of the fuel dump tanks, core and blanket has been coded for the IBM-704. The system of equations includes material balances, the dependence of critical temperature on core and blanket concentrations, and the effect of temperature (density) changes on flow rates. The controllable flow rates, the fuel dump tank weight and the initial conditions are input variables. Outputs include core and blanket concentrations, critical temperature, concentration ratio and power ratio. The code has been used to compute transients during a number of operating situations.

On 3/14/60 the Applied Physics Corporation was awarded a subcontract for the design and development of a high-temperature high-pressure spectrophotometer system based on the Cary Model 14pm Spectrophotometer insofar as possible, and consistent with our specifications, No. CTD-2, December 16, 1959.

Sanderson & Porter have carried out a series of studies over the last four years which indicate that the pebble-bed reactor way be an attractive way to obtain low-cost power. At the request of the Atomic Energy Commission, two design studies have been carried out on this concept at the Oak Ridge National Laboratory. The first of these a preliminary design of a 10-Mw(t) reactor experiment, the PRRE, was initiated September 10, and a report on the study was issued November 1960. The second phase of the work, a conceptual design study of a 330-Mw (e) central station, was initiated November 1, and is the subject of this report.

A conductometric titration method described by Goldstein was adapted for use in a remote analytical facility. The results obtained by mean of experiments made prior to this adaptation indicated that methanol is the most satisfactory medium in which to determine excess sulfuric acid in uranyl sulfate solutions that stimulate Homogeneous Reactor type fuel. When methanol is used, the complexation of hydrolyzable ions with sodium fluoride, as described by Pepkowitz, Sabol, and Dustin, is not required.

A carrier containing 138.99 liters of solution, uranium concentration 202.04 g/liter with an isotopic concentration of 97.3% U-233, was prepared for shipment. The total uranium was 28,062 +/- 60 g (95% confidence level) and the U-233, 27,305 +/- 66 g (95% confidence level).

A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper linearizing circuitry. The stream-coordinate Reynolds' stresses are then related to the cylindrical polar Reynolds stresses.