29,117 Matching Results

Results open in a new window/tab.

0-2 kv Flash Tube Supplies (open access)

0-2 kv Flash Tube Supplies

The power supplies designed and constructed to power high-intensity flash tubes are described. Three supplies, capable of charging 100 mfd to 2 kv with a repetltion rate of not less than 0.8 sec, are operated remotely from a control panel containing 3 powerstats. The power supplies are full wave center trapped rectifiers employing silicon rectifiers. (M.C.G.)
Date: March 15, 1962
Creator: Miller, D. M.
Object Type: Report
System: The UNT Digital Library
0-2 kv Flash Tube Supplies (open access)

0-2 kv Flash Tube Supplies

In order to perform the various experiments with a bubble chamber, a high intensity flash tube is used. This report briefly describes the power supplies designed and constructed to power these lamps.
Date: March 15, 1962
Creator: Miller, D. M.
Object Type: Report
System: The UNT Digital Library
1.5% boron, stainless steel (open access)

1.5% boron, stainless steel

A test report on the brittleness of borated steel to be used in the KIWI B-5 shield capsules.
Date: September 19, 1962
Creator: Schreiber, J.J.
Object Type: Report
System: The UNT Digital Library
6 kv CAPACITOR CHARGING SUPPLY (open access)

6 kv CAPACITOR CHARGING SUPPLY

The power supplies designed and constructed to power high intensity flash tubes used in bubble chamber experiments are briefly described and are accompanied by a schematic diagram of the layout. (D.C.W.)
Date: March 15, 1962
Creator: Miller, D. M.
Object Type: Report
System: The UNT Digital Library
6 kv Capacitor Charging Supply (open access)

6 kv Capacitor Charging Supply

The power supplies designed and constructed to power high intensity flash tubes used in bubble chamber experiments are briefly described and are accompanied by a schematic diagram of the layout. (D.C.W.)
Date: March 15, 1962
Creator: Miller, D. M.
Object Type: Report
System: The UNT Digital Library

[7-Up man]

Photograph of a 7-Up man receiving a presidential award from another man. They are shaking hands as the man on the left holds a paper in his hand.
Date: 1962
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Object Type: Photograph
System: The UNT Digital Library
12-INCH SODIUM FLOW CONTROLLER. Technical Manual 20357 (open access)

12-INCH SODIUM FLOW CONTROLLER. Technical Manual 20357

A manual is presented for the Sodium Flow Controller used in controlling flow to regulate heat transfer in a liquid metal nuclear power plant. A description of the controller, general installation and operational pointers, installation instructions, instructions for dismantling of the Sodium Flow Controller, instructions for assembly of Sodium Flow Controller, list of special tools and fixtures, and repair parts list are given. (M.C.G.)
Date: October 31, 1962
Creator: unknown
Object Type: Report
System: The UNT Digital Library

E-18 (Ca. 1962)

None
Date: 1962~
Creator: unknown
Object Type: Photograph
System: The Gateway to Oklahoma History
20-ton and 1/2-ton High Explosive Cratering Experiments in Basalt Rock: Final Report, August 1962 (open access)

20-ton and 1/2-ton High Explosive Cratering Experiments in Basalt Rock: Final Report, August 1962

This report describes the Sandia Corporation participation and results related to Project Buckboard: the detonation of three 40,000-pound and ten 1000-pound high-explosive charges in basalt rock to establish depth -of-burst curves.
Date: August 1962
Creator: Vortman, L. J.; MacDougall, H. R. & Rauber, D. F.
Object Type: Report
System: The UNT Digital Library
30 Megawatt Heat Exchanger and Steam Generator for Sodium Cooled Reactor System (open access)

30 Megawatt Heat Exchanger and Steam Generator for Sodium Cooled Reactor System

Final design for the 30 megawatt intermediate heat exchanger and steam generator.
Date: January 31, 1962
Creator: Alco Products (Firm)
Object Type: Report
System: The UNT Digital Library
30 Megawatt Heat Exchanger and Steam Generator for Sodium Cooled Reactor System: Volume 2, Chemical and Stress Analysis (open access)

30 Megawatt Heat Exchanger and Steam Generator for Sodium Cooled Reactor System: Volume 2, Chemical and Stress Analysis

Chemical engineering analysis and stress analysis for design of the 3 megawatt intermediate heat exchanger and steam generator for service with a liquid sodium heat transfer fluid.
Date: February 28, 1962
Creator: Alco Products (Firm)
Object Type: Report
System: The UNT Digital Library
30 Megawatt Heat Exchanger and Steam Generator for Sodium Cooled Reactor System: Volume 4, Operation and Maintenance Procedures (open access)

30 Megawatt Heat Exchanger and Steam Generator for Sodium Cooled Reactor System: Volume 4, Operation and Maintenance Procedures

Operation and maintenance procedures for 30 megawatt heat exchanger and steam generator for sodium cooled reactor system.
Date: May 15, 1962
Creator: Alco Products (Firm)
Object Type: Report
System: The UNT Digital Library

[70,000-lb steam drum being lifted at City of Denton Municipal Generating Station]

A crane is lifting a 70,000-lb steam drum in the center of the plane. The steam drum is part of a boiler at the steam power plant. The station was fully operational in May 1963 and an open house was held on June 2 of that year.
Date: [1962,1963]
Creator: unknown
Object Type: Photograph
System: The Portal to Texas History
190-DR steam turbine backup adequacy report (open access)

190-DR steam turbine backup adequacy report

Because of the questionable performance of the 190-DR steam backup system during the power outage of April 6, 1962, it is felt that a general review of the DR secondary water system capabilities and the standby status of the pumping units is warranted. This report shall briefly describe the performance of the steam backup system during the April 6 power outage and the subsequent power outage of July 10, 1962. Since the former outage, tests have been conducted on the steam pump units to determine their capabilities; the test results are presented in this report. A statement of the generally accepted criteria for secondary coolant system adequacy is included and recommendations for meeting the criteria at DR reactor are presented.
Date: November 8, 1962
Creator: Radtke, W. H. & Keplinger, E. R.
Object Type: Report
System: The UNT Digital Library

[301 W. Division, Arlington slide]

Photograph of a slide with the address 301 W. Division, Arlington.
Date: 1962
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Object Type: Photograph
System: The UNT Digital Library
333 Building preliminary survey potential equipment improvements (open access)

333 Building preliminary survey potential equipment improvements

In order to provide advance direction for 333 Building equipment development work, a survey of potential areas of significant savings through equipment improvement has been made. The purpose of this report is only to indicate areas for investigation, not to define a program. Equipment is adequate to maintain operating continuity and provide for safe operation of the building. Special attention should be given to ``one-of-a-kind`` pieces of equipment. These include the press, cutoff saw, beta heat treat facility and autoradiograph film developer. Manpower savings will result principally from refinement of each operation. There are no really outstanding areas for improvement. The greatest potential for savings is in material costs. These are illustrated in Tables I&IV. Maintenance costs provide for possible significant reductions at braze, vacu-blast, nondestructive test, autoclaves, and chemical processing equipment.
Date: August 22, 1962
Creator: Drumheller, K.
Object Type: Report
System: The UNT Digital Library

[570 programs slide]

Photograph of a slide or sign advertising the programs on WBAP.
Date: 1962
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Object Type: Photograph
System: The UNT Digital Library

[820 programs slide]

Photograph of a slide or sign listing some of the programs on WBAP-820.
Date: 1962
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Object Type: Photograph
System: The UNT Digital Library
A 1000 HOUR TEST OF A CORROSION PRODUCT SEPARATOR UNIT IN A HAYNES ALLOY NO. 25 LOOP CONTAINING MERCURY--TEST G-16 (open access)

A 1000 HOUR TEST OF A CORROSION PRODUCT SEPARATOR UNIT IN A HAYNES ALLOY NO. 25 LOOP CONTAINING MERCURY--TEST G-16

One of the major unsolved problems affecting the life of the SNAP II Power Conversion System is the mass transfer of corrosion products by mercury and subsequent deposition. It is feared that the corrosion products might tend to accumulate in critical areas such as orifices, bearings and so forth. Therefore, this test was conducted to evaluate a corrosion product separator and to determine the influence of corrosion product removal on corrosion rate. The corrosion product separator was successful in removing 85 percent of the elements corroded from the container walls. The loop and separator, both fabricated from Haynes alloy No. 25, operated for 1000 hours. The mercury was boiled and condensed at 1100 deg F, superheated to 1190 deg F and subcooled to 325 deg F. The flow rate in this loop was much higher than in previous loops, being approximately 37 pounds of mercury per hour as contrasted with approximately l2 pounds of raercury per hour. No increase in corrosion rate was noticed as a result of the higher flow rates and velocity or by the removal of corrosion products. If this type of separator or an improved type works equally as well in the final application, the danger …
Date: March 1, 1962
Creator: Nejedlik, James F.
Object Type: Report
System: The UNT Digital Library
12th Southwestern Exhibition: Prints and Drawings (open access)

12th Southwestern Exhibition: Prints and Drawings

Catalog from the juried "12th Southwestern Exhibition of Prints and Drawings," January 21–February 18, 1962, held at the Dallas Museum of Fine Arts. Includes: list of artists and artworks in the exhibition, list of awards and prizes, selected images.
Date: 1962
Creator: Dallas Museum of Fine Arts
Object Type: Pamphlet
System: The Portal to Texas History
14CO2 INCORPORATION INTO THE NUCLEIC ACIDS OF SYNCHRONOUSLYGROWING CHLORELLA CELLS (open access)

14CO2 INCORPORATION INTO THE NUCLEIC ACIDS OF SYNCHRONOUSLYGROWING CHLORELLA CELLS

A study of the incorporation of {sup 14}CO{sub 2} into cell components of synchronously growing Chlorella pyrenoidosa has shown that DNA is synthesized primarily during the latter stages of the cell cycle prior to cell division. RNA was synthesized at an approximately equal rate during each of the three phases of the cell growth studied. No major differences were noted in the incorporation of {sup 14}CO{sub 2} into the soluble cell components in these long-term incorporation studies.
Date: March 8, 1962
Creator: Stange, Luise; Kirk, Martha; Bennett, Edward L. & Calvin, M.
Object Type: Report
System: The UNT Digital Library

[1953 circuits]

Photograph of the circuits of an amplifier with the number 1953 written near the bottom.
Date: 1962
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Object Type: Photograph
System: The UNT Digital Library

[1956 circuits]

Photograph of the circuits of an amplifier that has the number 1956 written on a metal component on the bottom right.
Date: 1962
Creator: WBAP-TV (Television station : Fort Worth, Tex.)
Object Type: Photograph
System: The UNT Digital Library
"1961" (open access)

"1961"

Catalog from the exhibition, "1961," April 3-May 13, 1962, held by the Dallas Museum for Contemporary Arts. Includes: artists and artworks in the exhibition, images.
Date: 1962
Creator: Dallas Museum for Contemporary Arts
Object Type: Pamphlet
System: The Portal to Texas History