Second part of the "final report of a study directed toward the evolution, design, and demonstration of the principle design features of interim indirect cycle water cooled and moderated nuclear power plants which will be useful in early cooperative programs between the Atomic Energy Commission and the United States maritime industry" (p. II-i).

Report discussing an improvement program on lithium mass spectrometers.

Abstract: This report presents an analysis of coolant boiling in sodium graphite reactors.

This report summarizes the results and conclusions of a study made to evaluate the merits of using zirconium hydride as a solid moderator in an integral boiling water-nuclear superheat reactor of the pressure vessel type.

Abstract: This technical report contains a summary of experimental and analytical work performed on cold clean SM-1 Core II with special components and PM-2A Core I each with thermal shield and vessel mockups. The purpose of this work was to define the neutron intensity and spectra to which the pressure vessels are subjected in order to assess the effect of irradiation on the vessel lifetimes. The radial distributions of the energy dependent neutron flux per unit power in the core and vessel mockups are presented. The uncertainties associated with the measurements are also given. In addition to graphical and tabular presentations of the test results, discussions are provided on the experimental techniques and theory. A review of the analytical models is provided in addition to the calculational results. A special analytical study of the the PM-2A Core I power distribution and absolute power level determination is given. A comparison of the experimental and analytical results is made and conclusions and recommendations presented.

Abstract: This technical report covers the zero power experiments performed on PM-2A Core II at the Alco Critical Facility. PM-2A Core II is the first replacement core for a portable pressurized reactor at Camp Century, Greenland. Core II is the same as Core I with the exception that Core II has an increased burnable poison (B-10) content. The zero power experiment consisted of fuel element uniformity test; core assembly test, development of an on-site loading procedure and an analysis of experimental data. Physical characteristics determined include distribution of fuel and B-10 in the fuel plates, minimum critical mass, control rod bank calibration, and integral rod worth. The report concludes with an analysis of the experimental data including estimated uniform and non-uniform burnup rates.

Report documenting the survey of the U. S. Army Chemical Corps Schoo, Radiological Instruction Area, Fort Mclellan, Alabama. This survey measures radiation an d gamma-ray flux in an approximately one square mile area.

From introduction: "This is the eighth of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

Report discussing the use of sintered aluminum powder for nuclear fuel cladding. This report includes descriptions of pertinent materials and experimental procedures.

Report describing the properties of the Zircaloy pressure tubes at the Plutonium Recycle Test Reactor. Topics include the fabrication of these tubes, their mechanical properties, and operating stresses.

Report that reviews the yearly progress made in Reactor Fuel and Materials Development Program at the Engineering Test Reactor (ETR) and Materials testing reactor (MTR).

Abstract: This technical report contains a comprehensive analysis of the nuclear characteristics of the SM-1 Core I. Comparison of analytical and experimental results for neutron ages and core reactivities of a variety of cases investigated shows that the MUFT III with P-1 slowing down approximation gives the best results. At startup the core reactivity and rod bank worth under various operating conditions are investigated and compared to experiment. Core lifetime was calculated to be 16.8 MWYR compared to 16.4 MWYR experimental. The temperature coefficient has been calculated and compared to experiment as function of burnup. In Appendix A, flux distribution, temperature coefficient, effective delayed neutron fraction and core life are analyzed by Dr. R. L. Murray by one and two group modified theory series expansion calculations.