Experiments were carried out to determine the erosion, oxidation and dimensional characteristics of purposely defected fuel elements containing unsintered UO2 powder prepared by the swaging technique. The experiments were conducted in an out-of-reactor loop under superheat conditions of pressure, temperature, flow velocity and steam chemical composition.

A uniform intensity flat top spill-out cannot be obtained by manual control for two reasons: 1. The horizontal density of the internal beam of the Cosmotron is far from uniform. As a result, a manually controlled linear motion of the internal beam into a target will result in a non-uniform spill-out intensity. 2. Stability requirements of the Cosmotron magnet voltage are not easily met without feedback because of inherent component stability. The proposed servo system will sense the external beam intensity, and correct the magnet voltage to keep this intensity constant. This servo must operate through the transfer function of the main ignitron system and the flat top filter. Both of those transfer functions impose special problems.

A system for measuring depths of cryogenic liquids is described. The indicating device is a modified differential pressure gage. The level sensing probes are of various types, either permanent or removable. The heat leak to cryogenic liquids may be made negligibly small.

This report covers the S-I-5-B-M fuel irradiation in the GETR Maritime Loop during the first quarter of fiscal year 1962. The data are summarized in Section II.

To date, three types of metal-to-metal seal disconnects have been subjected to thermal cycling and make-break tests. In addition, a commercial disconnect has been procured for testing.

This report considers the HFIR reflector design criteria and presents a summary of the reflector design. The reflector type chosen as complying best with the established criteria consists of a 3 in. thick removable beryllium annulus utilizing four concentric cylinders with cooling water flowing through the annuli between cylinders, and an outer 9 in. thick permanent beryllium annulus with axial circular coolant holes. Reflector support structures and experimental facilities are described and probable beryllium replacement costs are indicated.

A relationship is derived the mean square fluctuating current of a hot wire anemometer and the sic turbulent Reynolds stresses in the stream-coordinate system without employing the usual low turbulent intensity approximation. The relatively simple result is a consequence of assuming proportionality between the wire current reading and the perpendicular velocity component instead of the non-linear dependence required by King's law. The assumption is valid for instruments equipped with the proper linearizing circuitry. The stream-coordinate Reynolds' stresses are then related to the cylindrical polar Reynolds stresses.