The power of nuclear track research emulsion as a fast neutron dosimeter is examined in the exposure of a human phantom to PuBe neutrons. Semiautomatic track scanning and high-speed data analysis obviate the major disadvantages of this dosimeter, and allow the following basic information to be obtained without a serious cost in time: the rulative proton recoil energy spectrum, the absolute differential proton track den sity spectrum, and the average proton recoil energy at various locations in the phantom. From this are calculated the total absorbed local tissue doze due is proton recoils, the local thermal neutron intensity, and that portion of the tissue doze due to thermal [formula] tracks.

One of the techniques by which highly ionized plasmas can be generated in the laboratory makes use of strong, electromagnetically driven shock waves propagating into a cold gas. In this paper the phenomenon is analyzed as a one-dimensional single-fluid hydromagnetic problem, neglecting dissipation behind the wave.

In previous letters we have reported a Av resonance, called Y*1, observed through the study of the interaction of 1.15-Bev/c K* mesons in hydrogen in the Lawrence Radiation Laboratory 15-in. bubble chamber. We now wish to report the results of the study of the three reactions [formula](1), [formula](2) and [formula](3).

The guiding center motion and the adiabatic invariants of charged particle trajectories in electromagnetic fields are treated in this review. General and specific theories of charged particle motion are also reviewed.

This paper reports the chemical and physical properties of the NTA film packet. It correlates with these properties the response of this packet to neutrons of various energies. In this correlation the concept of the track unit is introduced as a basic unit for reporting film-packet response.

This paper discusses a group of high-speed switching circuits using the basic current-switching mode of operation. The first part of the paper presents a dynamic analysis of the basic current-switching mode and the second part is the dynamic and steady-state analysis of a current-switching flip-flop.

Antiproton-production and nucleon-interaction cross sections were investigated for antiprotons in the energy range 0.5 to 1.0 Bev. The antiprotons were distinguished from other particles produced at the Bevatron by a system of scintillation- and velocity-selecting Cerenkov counters. The excitation function and momentum distribution were recorded for antiproton production in carbon and compared with statistical model expectations.

This paper reports an extension of previous experimental work with Alfven waves. We consider hydromagnetic waves propagating in a cylindrical plasma in a uniform axial magnetic field. The copper tube is filled with highly ionized plasma by an electrically driven switch-on ionizing wave. After the tube is filled with plasma, a hydromagnetic wave is induced by a radial current flow from the small molybdenum electrode to the copper tube. The force produced by this radial current together with the static axial magnetic field displaces the plasma in the azimuthal direction, and a transverse wave is propagated in the axial direction, along magnetic field lines. The transient magnetic field associated with the wave is also in the azimuthal direction.

Volatile hydrides may be prepared from ether solutions by the reaction of the appropriate chlorides with lithium hydroaluminate. In this general method, it is necessary to work with strictly anhydrous reagents and solvents because of the great reactivity of lithium hydroaluminate toward water. The procedures described here are believed to be much more convenient because the reducing agent employed is potassium hydroborate, which is relatively insensitive toward water. Since only aqueous solutions are involved, there are no solvent-purification steps and there is no dissolution or contamination of stopcock grease, etc.

It is possible to generate a relatively uniform, highly ionized plasma by passing a powerful discharge between electrodes so arranged that the current is forced to flow across an initial strong magnetic field. The magnetic induction due to the discharge causes a bending of the original field. If the discharge is operated with a low-impedance current source, the electric breakdown starts in a limited region near the current-input connections (minimum-inductance path) and propagates as a well-defined front in the manner of a hydromagnetic shock wave. In this paper we analyze the phenomenon as a one-dimensional single-fluid hydromagnetic problem, neglecting dissipation behind the wave.

In a previous publication we reported measurements of the momentum spectra of He<sup>3 and H<sup>3 nuclei produced in collisions of 740-MeV protons with deuterium. The He<sup>3 spectrum exhibited an anomaly in the form of a peak in the region corresponding to double pion production. For reactions resulting in a He<sup>3 the two pions (or particle) can be isotopic spin states 0 or 1; if a H<sup>3 nucleus results only 1 = 1 is allowed. We have since repeated the experiment with a new arrangement which enabled us to measure both the He<sup.3 and H<sup>3 spectra with improved resolution and accuracy.

The problem of the natural convection of an electrically and thermally conducting fluid within a long, narrow, vertical toroidal channel centered in a large block of an electrically and thermally conducting solid is analyzed. A uniform horizontal magnetic field is applied to the fluid, and the bottom of the solid block is maintained at a higher fixed temperature than the top. The laminar steady-state single-cell convective motion of the fluid is considered and an approximate solution is found for the heat transfer rate between the bottom and top surfaces of the block in the limiting cases of small and large Hartmann number. A numerical example is given for liquid sodium in which the application of a magnetic field of a few hundred gauss is shown to significantly reduce the rate of heat transfer.

An electron can suffer a very large acceleration in passing through the Coulomb field of a nucleus, and in this interaction the radiant energy (photons) lost by the electrons is called bremsstrahlung (also, bremsstrahlung sometimes designates the interaction itself). If an electron whose total energy [formula] traverses matter of atomic number Z, the electron loses energy chiefly by bremsstrahlung. This case is considered here.

The sodium-ammonia solution system permits investigation of an array of compositions spanning the transition from non-metallic to metallic bonding. Reflection spectra in the range 1-20 [ ] were measured for solutions of mole ratio 5.5 to 168 [ ] per Na. The dilute solutions show peaks characteristic of the vibrations of ammonia and a strong peak near 1.5 [ ] which is assigned to the solvated [ ] species. Concentrated solutions show high reflectivity over broad wavelength ranges. The results for nearly saturated solutions are fitted reasonably by the free electron model, but in the range of mole ratio 10-15 a complex array of energy absorption processes of finite frequencies are required to fit the spectra.

Use of that portion of the characteristic curve of photographic film in which transmission is linear with log exposure eliminates the distributional error and thus makes possible the assessment of total mass of an inhomogeneously distributed cell consistent without scanning or measuring the cell's projected area. Measurement consists of obtaining the difference in output of a photocell receiving the total light transmitted by a photomicrograph of the cell, and a photomicrograph of the microscope field illumination against which the cell was photographed. A method of making such measurements is given, and its basis is described.

The effect of temperature on the yield strength of the polycrystalline hexagonal Ag-Al intermetallic phase was investigated over the temperature range 77 to 775 K. It was found that the curve for yield stress vs temperature for both polycrystalline Ag-33 at .% Al specimens that were heavily cold worked prior to deformation and those that were recrystallized prior to deformation was parallel to that for prismatic slip in single crystals.

The neutron-deficient yttrium isotopes Y82, Y83, and Y84 have been produced by irradiations with the Berkeley heavy-ion linear accelerator. Where possible, identifications were made by establishing genetic relationships with known daughter or granddaughter activities. The half-life of Y84 determined by direct decay is 39+-1 min. By a series of timed chemical separations, the following half-lives have been established: Y82, 9+-3 min; Y83, 8+-2 min. No information pertaining to the radiations emitted in the decay of three yttrium isotopes, other than Y84, has been obtained. The gamma-ray spectra of Y84 and Sr83 are shown.

The absolute differential cross sections for elastic scattering of 31-Mev He3 ions on Be, Al, Cu, Sn(nat), Sn120, and Bi have been measured in the angular range of approximately 10 to 120 deg in the center-of-mass system. Thin self-supporting foil targets were chosen to span the parameter A 1/3, where A is the target mass number. The first excited states of the isotopes of the above elements had sufficient energy separation from the ground state to enable elastic scattering to be resolved from inelastic scattering. The detection system, consisting of Cal(Tl) scintillation crystals, was capable of 3%pulse-height resolution and 1 degree angular resolution. Characteristically, the light-element angular distributions show strong diffraction effects. The differential cross section divided by the Rutherford cross section decreases exponentially at large angles for the heavy elements, and the differential cross sections break away from Rutherford behavior at angles which increase almost linearly with increase of atomic number of the target nucleus. A comparison of the results for natural tin, and tin enriched to 85% in Sn120, indicated that within the experimental uncertainties over the measured angular interval, there were no pronounced isotopic effects. The data are presented both in tabular and graphical form to allow …

This reference manual describes the IBM 704 program called Kick, by which complete bubble chamber events are kinematically analyzed. Kick's input data is the output from the Pang program, which uses raw track measurements to spatially reconstruct the tracks, and fits appropriate curves to them.

Specimens suitable for transmission electron microscopy have been prepared from bulk polycrystalline molybdenum after tensile deformation and recovery. The resulting dislocation substructures are described. Some tentative conclusions concerning the mechanism of plastic deformation in molybdenum are discussed.

The method of dispersion relations has in recent years found a wide application for the study of elementary particle reactions. Most of the work, however, deals with reactions of the type [formula], while the theory of those with more than two particles in the final state is still in a very preliminary stage. One reason for this is that even with only three particles in the final state the theory is already much more complicated. Nevertheless, a further development of the theory seemed to us very desirable. The theory at present is being developed on various levels simultaneously. Generally speaking, the aim of this paper is to put the theory in a form as closely as possible analogous to Mandelstam's formulation of the theory of reactions of type [formula]. In the later sections we specialize on reactions [formula], but as much as possible the formulation is in more general terms.

The radius of a c-p hybrid orbital has been found to be given by the expression: [formula] where A is the radius of the pure p orbital, B, a universal constant equal to 0.336 A, and [ ], the coefficient of mixing in the hybrid s + [ ]. When radii appropriate for the orbitals that are paired together are used, bond length is additive of the orbital radii and no Schomaker-Stevenson correction is necessary. This shows that most bonds can be treated as covalent, single and localized.

This system presents a method for making remote sealed-bag passouts from a multicurie-level chemistry processing enclosure. In addition, the polyethylene bags are changed remotely without exposing contaminated surfaces while always maintaining a low leak-rate seal. Our system employs an interchange box (the Passout Box) attached to the chemistry enclosure. Integrated with the box is a hydraulically operated jack that raises and lowers the bags, and a welder-cutter for sealing them. A single master-slave manipulator teamed with the above units handles all operations.

A system for measuring depths of cryogenic liquids is described. The indicating device is a modified differential pressure gage. The level sensing probes are of various types, either permanent or removable. The heat leak to cryogenic liquids may be made negligibly small.