Abstract: This technical report describes the changes incurred in the SM-1 by the insertion of the SM-1 Core II without special components. The SM-1 Core II components were made to specifications very nearly identical to those of SM-1 Core I. The differences consist of europium absorber sections, internal europium flux suppressors in the control rod fuel elements, and low impurity cladding. Each of the SM-1 Core II components with the exception of the five absorber sections new in SM-1 Core I were subjected to a Zero Power Experiment at the Alco Critical Facility. The results of this experiment indicate that the SM-1 Core II will have nuclear characteristics very similar to that of the SM-1 Core I. Since SM-1 Core II will be operated with the same mode of rod control, in the same core support structure, and with the same primary coolant flow conditions, the thermal characteristics should be essentially identical to that of SM-1 Core I. Also, all kinetic characteristics of SM-1 Core II should be identical to those of SM-1 Core I. This report demonstrates that there is no increase in potential for a hazardous situation at SM-1 due to the replacement of SM-1 Core I by …

The following objectives were planned for this project. (1) Development of spinning data necessary for spinning Columbium and Columbium-1% Zirconium tubing from ingot, forged or welded tube blanks. (2) Determine mechanical & metallurgical properties of spun Columbium and Columbium-1% Zirconium tubing. (3) Determine dimensional and tolerance limits possible to attain on spun Columbium and Columbium-1% Zirconium tubing based on our present equipment, tooling limitations, and the spinning tests performed for objective No. 1.

It is shown that under very simple and general assumptions the existence of an antiunitary reflection transformation and the charge gauge group implies the existence of an antiparticle corresponding to a given charged particle. Similar consequences follow on replacing the charge gauge group by the baryon gauge group. No assumptions as to specific wave equations, or indeed the existence of local fields, are made.

Use of that portion of the characteristic curve of photographic film in which transmission is linear with log exposure eliminates the distributional error and thus makes possible the assessment of total mass of an inhomogeneously distributed cell consistent without scanning or measuring the cell's projected area. Measurement consists of obtaining the difference in output of a photocell receiving the total light transmitted by a photomicrograph of the cell, and a photomicrograph of the microscope field illumination against which the cell was photographed. A method of making such measurements is given, and its basis is described.

Analyses are generally made at the ORR with a view toward determining the surface temperatures of fuel plates.

A review of helium sources, availability, consumption, and future production capacity indicates that the helium consumed in the operation of 100 helium-cooled reactors for 300-Mwe power plants over a 20-year period will run no more than a few per cent of the helium consumed in the U. S. in the next 25 years and less than 1% of the helium that is to be stored during that period under the helium conservation act of 1960 (Public Law 86-777).