Presented at session S-1 of the Tenth Annual International Conference on High-Energy Physics, Rochester, New York, August 25- September 1, 1960. The analysis of the latest experiments on p-p scattering at 210 Mev makes it probable that there is a unique set of phase shifts at this energy. Under reasonable assumptions about continuity of the phase shifts and the behavior of the higher partial waves, it is possible to pick a unique solution also at 310 and 95 Mev. This opens a new era in the analysis of nucleon-nucleon scattering, which should lead to a unique model for the scattering matrix up to 400 Mev. Theoretical attempts to calculate a "meson potential" from field theory have not been successful, and the semi-phenomenological potential models, although now in good qualitative agreement with experiment, are not quantitatively reliable. Instead of using these models as a basis for an energy-dependent parameterization of the scattering matrix, as was done by Breit and his collaborators, it is here argued that the Mandelstam representation offers a more reliable starting point. A formalism is developed which allows the one and two pion exchange interaction to be included exactly and gives a Lorentz-invariant description of the rest of …

Two IBM-704 codes have been written which are auxiliary to the Bevatron orbit code BOC. The first, BEFCYF, interpolates among tabulated values of the median-plane magnetic flux density of the Bevatron to produce an equivalent array of values in a form appropriate to BOC. The second, DBDT, produces azimuthal derivatives of the fields produced by BEFCYF. The internal operation of BEFCYF and DBDT is described, and instructions for their execution are given.

It is shown that a radial pressure gradient exists in the silver chloride when it is used as the pressure transmitting medium in Bridgman anvils. The gradient can be obviated by the use of circular sections of wire. The center of curvature of the wire hoop is made coincident with the anvil center. When the inner and outer diameters of the pyrophyllite retaining ring are 1/2 and 7/16" respectively, the pressure, P, is P = (0.725 + 0.468R) L where R is the fractional displacement from the center, and L is the average pressure as determined from the total load and area of the anvil face. The above appears to be valid to 125 Kbars. The Bismuth 6-8 transition is found to accur at 88+3 Kbars.

Molecular sieves are synthetic zeolites which, when dehydrated, contain a network of empty pores and cavities that constitute almost 50% of the total volume of the crystals. They have the unique property of adsorbing within these cavities only those molecules that are small enough to pass through the pores of the crystals, Molecular sieves have a very strong affinity for water and other polar molecules. It is this selective property plus their stability and reasonable cost that make them of interest for the application described herein.

FLOSS III is a third-generation version of a digital computer program which solves a one-dimensional difference representation of the momentum, energy, continuity, and state equations for turbulent, compressible gas flow in equivalent hydraulic channels. Extensive use of this program has been employed in the design and performance analyses of Pluto-type nuclear heat exchangers, and in the specific case of the Tory II-A test series, agreement was obtained to better than 5% for all experimentally measured parameters. The NOMAC and DASH-N programs combine the effects of up to thirty varieties of channels with the dependent boundary conditions imposed by a common inlet diffuser and exit nozzle. The resulting calculations yield performance information for blow-down facility and ramjet flight condition application of the heat exchanger.

Calorimetric measurements by Rao and Giauque (1960) showed some unaccountable residual entropy in crystals of [formula] at low temperatures. We have investigated the crystal structure in search of an explanation of the disorder. The resulting structure offers no possibility of disordered rings of hydrogen bonds such as were found in [formula], nor do we find any other explanation of the entropy discrepancy.

In a previous publication we reported measurements of the momentum spectra of He<sup>3 and H<sup>3 nuclei produced in collisions of 740-MeV protons with deuterium. The He<sup>3 spectrum exhibited an anomaly in the form of a peak in the region corresponding to double pion production. For reactions resulting in a He<sup>3 the two pions (or particle) can be isotopic spin states 0 or 1; if a H<sup>3 nucleus results only 1 = 1 is allowed. We have since repeated the experiment with a new arrangement which enabled us to measure both the He<sup.3 and H<sup>3 spectra with improved resolution and accuracy.

The F-48 columbium base alloy maintains useful mechanical properties for structural application up to 2600 degree F. Short-time tensile and creep rupture strengths have been determined for four F-48 plates, each from a different heat and with a different work history. Flow testing in a high-temperature, high-pressure air stream has been conducted to study oxidation behavior of the bare meatal. Auto-ignition is found to occur at a stream temperature of 2600 degree F. The phenomenon appears to be temperature dependent only. Development of an oxidation protection coating, utilizing environmental flow test apparatus, is proceeding.

The increasing popularity of liquid-hydrogen targets in physics research has emphasized the need for containers with maximum beam transparency (i.e., thin walls and low Z) and suitable strength at cryogenic temperatures. Fabrication of a Mylar container satisfying these requirements is described here.

This report is a corrected copy of the authors "rapporteur talk" at the 1959 Kiev Conference on High Energy Physics. It contains data on the rapporteur system and on interactions of strange particles with protons and neutrons, using data from bubble chambers, counters, and emulsions.

The magnetic properties of core materials ae investigated for a pulse width of 30 nanoseconds. Methods of testing which are necessitated by the sort pulse width are explained and the design of the pulser which is capable of 0.2 megawatt peak power is described. The data obtained if evaluated and presented for the various materials which were tested.

By use of the equations of magnetohydrodynamics the diffusion of a magnetic field into a plasma is calculated. In this paper it is assumed that the electrical conductivity of the plasma follows a (temperature)3/2 power law and that acceleration effects are negligible. Under these conditions it is shown that the magnetohydrodynamic equations reduce to one nonlinear diffusion equation for the magnetic field. this equation is solved with the help of the IBM-650 computer, and the results are presented graphically and compared with the results for linear diffusion.

Abstract. A method is described for measuring the molecular flow conductance of scale models of complete diffusion pump systems. Results are given in terms of Clausing's factor P, defined by P= F/F(0), where F is the net volume flow rate through a geometry and F(0) is the volume flow rate of gas striking the orifice of the geometry. Use of the factor P allows prediction of the conductance of the full-scale system represented by the model. Experimental and theoretical data are presented for straight cylinders, cylindrical elbows, and several geometries having no-line-of-sight through them. It is shown that for an optimized diffusion pump system, comprising baffle, trap and valve, 0.3 [less than] P [less than] 0.5 can be obtained.

The principal types of particle accelerators are described briefly according to operation and history. Known operating particle accelerators are listed with their pertinent dimensions.

A series paired explosions in a salt mine near Winnfield, Louisiana, has been conducted to test a theory by A.L. Latter concerning seismic decoupling by underground cavities. The theory predicted a decoupling of 132 Free-field and surface measurements from an explosion in either a 6-ft- or a 15-ft-radius spherical cavity were compared with similar measurements from a completely tamped explosion of equal size. Shot sizes were from 20 pounds up to a ton. Surface measurements were made out to 100 km and covered the frequency range from 0.05 to 100 cps. The experiments confirmed that decoupling does occur. For explosions that produce an average cavity pressure up to one-fifth and possible more of the lithostatic overburden pressure, seismic waves were decoupled by the 100, i.e., two order of magnitude. Even for explosions producing an average cavity pressure of six times the lithostatic overburden pressure, the seismic waves were decoupled by 20 -- more than a full order of magnitude. Minimum decoupling factors as a function of frequency are presented.

A system for scintillations from nuclear events has been developed and is presently in use at the Lawrence Radiation Laboratory. This paper primarily describes the pulsed light source used to simulate nuclear events; it also describes the necessary nanosecond pulse techniques to measure the light source parameters and to operate large numbers of lamps. Considerations concerning distribution networks are shown. Use of the light source as a spark gap trigger is also discussed.

Reactivity measurements made by the pulsed neutron technique were compared with results obtained by conventional techniques. The pulsed neutron results were in good agreement with those obtained by stable period measurement and rod drop. Differential effectiveness of partially inserted rods was shown to be well represented by elementary perturbation theory. Finally, the pulsed neutron technique was found to be the only good method for measurement of large reactivity changes.

The atomic beam magnetic-resonance method with separated oscillatory fields has been used to measure the hyperfine structure separation and magnetic dipole moment of the isotopes Rb85 and 18.6d Rb86 in the 2S1/2 electronic ground state. Observation of the separation of a [formula] doublet in the intermediate field region gives the value of the moment; the minimum value of the mean doublet frequency gives the value of [formula]. Observation of another [formula] doublet in low field also yields a value for [formula].

This system presents a method for making remote sealed-bag passouts from a multicurie-level chemistry processing enclosure. In addition, the polyethylene bags are changed remotely without exposing contaminated surfaces while always maintaining a low leak-rate seal. Our system employs an interchange box (the Passout Box) attached to the chemistry enclosure. Integrated with the box is a hydraulically operated jack that raises and lowers the bags, and a welder-cutter for sealing them. A single master-slave manipulator teamed with the above units handles all operations.

The cross sections for coherent and incoherent scattering of neutrons from polycrystalline materials are discussed. It is shown that the incoherent elastic, incoherent inelastic, and coherent elastic cross sections may be calculated with negligible error using a simple Debye model to give the phonon spectrum. the criterion determining the correct Debye parameter to use is discussed, and it is emphasized that it is important to allow a temperature dependence in this parameter in order to take account of the temperature dependence of the phonon spectrum. The Debye model is not really adequate to calculate the coherent inelastic cross section and gives results which may be in error by about 15% at very low incident energies.

A need for a small vertical cylinder-type furnace arises frequently in the Chemistry Department at the Lawrence Radiation Laboratory (LRL). Adequate heat is the major requirement; close control or calibration is not usually necessary. A heating unit of this type can either be used for quickly concentrating solutions in centrifuge cones or, by the addition of a refractory pedestal--can be made into a crucible furnace for size 0 and 00 crucibles. Because much of the chemistry done at LRL is with radioisotopes, disposal of contaminated equipment is an important consideration. In general, furnaces are difficult to decontaminate, hence there was a need for a disposable type. Because nothing meeting the requirements seemed to be commercially available, the Health Chemistry Department made up a simple furnace that has proved useful.

The purpose of this Note is to point out the advantages of the sideband technique over the derivative method in wideline NMR spectroscopy. In the sideband technique the absorption spectrum is recorded directly and the modulation amplitude is no longer a determining factor in the resolution.