The first step in a proposed processing method for recovery of uranium from graphite-uranium fuels consists of oxidation of the fuel by oxygen to volatilize the carbon. Residue ash from the combustion step can be treated in a variety of ways to recover and purify the uranium. The combustion step may be caried out by contacting the solid fuel in a fixed or moving bed with a stream of oxygen-bearing gas in a tubular or annular reactor. Oxidizing gas may be introduced to the reactor at several points up the reactor and there may be continuous or intermittent addition of fresh fuel and removal of residue ash.

Report issued by the Oak Ridge National Laboratory discussing work and progress made by the Health and Physics Division during 1963. Instrumentation, personnel monitoring, and laboratory monitoring is presented. This report includes maps, tables, illustrations, and photographs.

The thermophysical properties of Armco iron such as thermal conductivity, electrical resistivity, and Seebeck coefficient have been extensively investigated and reviewed up to 1000 degrees C. Few investigations of such properties have been made on high purity iron. If such a study is made using the same apparatus to determine the properties of two purity levels of iron, then several significant intercomparisons can be made which add meaning to data on a single material. The systemic errors for a single apparatus are the same, therefore comparison of a property of two similar materials is more significant. A comparison of the property changes with temperature and purity can show the effects of impurities on the mechanisms contributing to a property and allows prediction of the properties of iron as a function of purity. For these reasons a study was initiated on the high-purity iron for comparison to Armco iron.

Report presenting the calculation of the costs incurred in shipping irradiated uranium-containing fuel elements. A computer code that designs a cask and calculates the shipping costs is presented. By use of the code, shipping costs were calculated for typical reactor fuels.

The purpose of this study was to investigate mathematically the concentration decrease due to particle deposition phenomena in highly concentrated monodispersed aerosols (mean particle size less than 1.0 mu) flowing through ventilation ducts. It was found that, from the standpoint of removal, the decrease in concentration due to deposition on duct walls was insignificant; but, when considering contamination on duct walls, the amount deposited, even though small when compared with the amount in the bulk stream, should not be overlooked.

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

The first man-made nuclear reactor -- or "pile" as it was then called -- was rather hurriedly improvised and operated in a crowded space under the athletic bleachers of Stagg Field at the University of Chicago on December 2, 1942. Just prior to this time, there began the assembly of a group of physicists with an unusual assignment. They were determined that radiation hazards of unprecedented proportions must be coped with successfully in the conduct of reactor programs as planned. Since these physicists were to be concerned with the health of radiation workers, they were called health physicists. There was no formal instruction available to this first group of health physicists and they perforce received training as they felt their way by firsthand experience and by trial and error. Health physics at Oak Ridge National Laboratory from the very beginning has been organized into three principal areas: applied activities, education and training and research.

Report containing a series of drawings detailing the Oak Ridge National Laboratory's high flux isotope reactor, its surroundings, and its systems.

Report issued by the Oak Ridge National Laboratory discussing quarterly progress made by the Homogeneous Reactor Program. It includes descriptions of progress and studies conducted during the report period, with tables, illustrations, and photographs.

Report presenting in-pile loop experiments DD, EE, FF, GG, L-412, L-413, and L-418, which were seven of a series designed to test the radiation corrosion of zirconium, titanium, and stainless steel alloys in solutions under various conditions of radiation intensity, temperature, solution composition, and velocity of flow. Steel specimens exposed in the loop cores showed increases in corrosive attack over that expected out-of-radiation.

Report that describes the research and developments of the Nuclear Safety Research and Development Program of the Oak Ridge National Laboratory.

From introduction: "This is the eleventh of a series of quarterly reports which will cover the progress and results from the conceptual design, economic evaluations and research and development work performed by the General Electric Company as part of the Nuclear Superheat Project."

Report containing a survey of the radiation from the nuclear ship Savannah in order to determine the dose rate for people aboard.

Report that "describes a new version of the code, POWERC-50, which contains several changes" to the previous code, POWERCO-25, which was used to calculate "the levelized cost of electricity produced by nuclear power stations" (p. 1)

The experimental details, mathematical models, and typical data for a rapid comparative method for thermal conductivity measurements are presented. The method consists of measuring the temperature change of a small silver sphere after it is brought in contact with a small disk-shaped specimen which was initially at ta higher temperature. This temperature change was calibrated in the range of 50 to 400 degrees C by making measurements on samples of know thermal conductivity. The accuracy of this technique was shown to be between than +-10% with a reproducibility of at least +-2.5%. Using known transport mechanisms for heat conduction in solids and the temperature dependency of the electrical conductivity, a means to judiciously extrapolate thermal conductivity data obtained between 50 and 400 degree C to high temperature is presented.

Grade CGB graphite is a nuclear graphite which is basically an extruded petroleum coke bonded with coal tar pitch. No carbon blacks are used and the low-permeation graphite is finished through a series of impregnations and heat treatments with a final heat treatment of all components to 2800 degrees C. A listing of the results obtained is given in Table 1. The results at 51 degrees C are considered questionable. There was a slight contamination of the 90% Pt 10% Rh-Pt thermocouples at 910 degrees C but it was not sufficient to doubt the validity of the 910 degrees C results. However, the results obtained at 1015 degrees C should be disregarded because of severe thermocouple instabilities. In addition, the electrical resistance of the core heater at 603 degrees C indicated the thermocouples had a -10 to -15 degree error which is sufficient justification to disregard the 605 degrees C data.

First volume of a compilation of information about reactor containment, written by experts from a variety of organizations.