From Abstract: "A calibration is applied to the intensity measurements of the 1400 lines below 2450 A in the NBS Tables of Spectral-Line Intensities. Tables of the new values are presented with the lines arranged by elements and by wavelengths."

From Abstract: "The bibliography, a supplement to NBS Monograph 35, of the same title, covers the years 1960 to 1965, inclusive, and include 109 references for prior years not listed in Monograph 35. It contains 1787 references, 38 of which are to books. The references, besides those directly concerned with pressure measurement, include those on vacuum technology which may bear on the technique of vacuum measurement, such as on adsorption and desorption, diffusion of gases into solids, gas conductance and hardware such as pumps, seals and traps."

Report combining National Bureau of Standards Monograph 27 with the references given in Supplement 1 (May 13, 1963) and issued as a single publication to assist users of this material. References concern the field of temperature measurement. These references were collected from two general sources: Scientific and technical literature and government reports. References are divided into a number of categories based on the type of instrument used. Some references to calibration of instruments and to scientific theories upon which temperature measurement is based are also presented.

From Introduction: "This symposium focuses attention on the growing awareness of the necessity for developing and using better methods for characterizing solids. Many of the most interesting properties of solids depend directly upon these small concentrations of impurities and defects, and the illustration of this is a principal theme of this paper."

From Introduction Purpose and Scope of Report: "This report is one of a series prepared for the Research Information Center and Advisory Service on Information Processing (RICASIP), and intended as a contribution to improved cooperation in the fields of information selection systems development, information retrieval research and mechanized translation."

Report discussing the selection, specifications, and use of signal-light colors. It discusses the nature of the problem, and the mathematical representation, recognition, production, control, and use of such colors. The characteristics of different types of chromaticity boundaries and the purpose and effect of the requirement for similarity of chromaticity characteristics are given special consideration. The treatment is varied according to the intended use. The discussion of the control of colors and the section on the use of colors are nontechnical, whereas the section on the production of signal colors is designed for the colorimetrist who is faced with the problem of selecting limit filters or drafting a specification.

Report discussing microwave attenuation measurement methods and standards. In addition, a relatively new and more precise way of representing and analyzing an attenuation measurement is presented. This in turn permits more rigorous definitions and error analyses than were previously possible. The referral of microwave attenuation measurements to standards operating at lower frequencies is discussed with particular attention to the errors in the referral processes as well as the errors in the standards themselves. Desirable characteristics are listed for attenuators which are suitable for calibration. Measurement methods are classified and described. Comments are made on the accuracy and convenience of various methods, and references are given which cover most of the basic and important research in this field. Key words: Microwave, attenuation, measurements, standards, tutorial.

Major psychological findings and data in the field of the legibility of alphanumeric characters and other symbols.

The abscissas and weights for Gaussian Quadrature of order N = 2 to 100,and N = 125, 150, 175, and 200 are given. The abscissas are given to twenty-four places and the error is estimated to be no more than 1 unit in the last place. The weights are given to twenty-three places and the error is estimated to be no more than 1 unit in the last place.

From Abstract: "An introductory text gives a detailed description of each column of the solar ledger. Tables include counts of lines of each spectrum recorded in the identification column, leading lines in the first and second spectra, and summaries of molecules and elements present in the sun. About 73 percent of the lines are wholly or partially identified. Sixty-three elements are recorded as present."

Design and performance of a new near-zone electric field-strength meter.

From Abstract: "This Monograph is a revision of the previous NBS Monograph 18. Its purpose is to provide an understanding of the heat treatment of iron and steels, principally to those unacquainted with this subject. The basic principles involved in the heat treatment of these materials are presented in simple form." From Introduction: "This Monograph has been prepared to answer such inquires and to give in simplified form a working knowledge of the basic theoretical and practical principles involved in the heat treatment of iron and steel."

Compilation of carbon monoxide band positions, molecular constants, energy levels, potential energy curves, and other molecular properties derived from the spectrum.

From Introduction: "Following the guidelines established by this committee, several commercially developed precision connectors have appeared on the market which have led to the wide use of the precision coaxial lines as immittance standards. This paper has been prepared to alleviate this situation by providing graphs from which the electrical parameters of the lines may be determined rapidly and accurately."

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Graphical presentation of he three-phase region at and near the triple point of parahydrogen.

Report compiling the work done in radio meteorology over the past ten years at the National Bureau of Standards' Central Radio Propagation Laboratory (CRPL). There is an emphasis upon the effects of the lower atmosphere on the propagation of radio waves. The CRPL group has concentrated upon the refraction of radio waves as well as the refractive index structure of the lower atmosphere on both synoptic and climatic scales. Additional chapters on radio-meteorological parameters and the absorption of radio waves by the various constituents of the lower atmosphere.

Definitive history of the United States National Bureau of Standards.

From Abstract: "Numerical results, in table form, on the required phases, the directive gain, the current excitations, the location of all the sidelobes and nulls, and the beamwidths for uniformly spaced optimum endfire arrays with equal sidelobes are given."

Description of a computer program for searching chemical information on magnetic tape.

Report discussing the literature on the oxidation of polycyclic, aromatic hydrocarbons. Information has been assembled on (1) the oxidants effective in the oxidation of such hydrocarbons, (2) the relative reactivity of the hydrocarbons, (3) the conditions under which oxidation proceeds, (4) the chemical mechanisms involved when such oxidations occur, and (5) the products formed.

From Abstract: "This Monograph presents an outline of the methods used at the National Bureau of Standards to predict the performance of lenses from an analysis of their designs. The technique is based on the use of spot diagrams, which are analogs of star image tests, and makes extensive use of high-speed digital computers."

Report presenting a survey and discussion of well-known microwave impedance measurement techniques. The discussion includes an introduction which emphasizes basic concepts and reflection coefficient-voltage standing-wave ratio relationships. Sources of error in the various measurement techniques are discussed and methods to reduce errors are presented. Methods using rotating loops and resonance lines are included and a brief discussion of microwave impedance standards is given.

From Introduction: "In the present report, therefore, polynomials representing isotherms and isochores are combined with numerical methods of computation for the purpose of improving accuracy, in particular for the derivatives of the P-p-T surface."