"Some of the important results obtained in investigations of capacities of plumbing stacks in test systems at the National Bureau of Standards and elsewhere are discussed. Data are shown from experiments on the flow of water and air in such systems, and analyses of certain flow phenomena are given. Methods are shown for applying the results of research in hydraulics and pneumatics to the preparation of loading tables (for drainage and vent stacks) suitable for use in plumbing codes" (p. 1).

From Abstract: "This Monograph contains a consistent set of tables of thermodynamic properties of a large number of diatomic hydrides, deuterides, and tritides, for the ideal gas state at one atmosphere pressure. In addition to the thermodynamic properties of the molecular gases, the tables also include thermodynamic properties for chemical reactions involving the isotopic exchange of hydrogen."

Report giving tables of the linear contraction relative to 293 ºK, (L293ºLT)/L293, and the linear expansion coefficient, dL/L293dT, of thirty elements, forty-five alloys, twenty-two other inorganic substances and twenty plastics and elastomers in the temperature range, 0 to 300 ºK.

Graphical presentation of K-factors for eight isotherms, published data on the solid-vapor region, and a bibliography of approximately 450 references.

Report discussing variations in comparative tests of portland cements that could lead to the rejection of a material fully conforming to specification requirements, or the acceptance of a material with undesirable chemical or physical properties. Many of the causes for variation in chemical analyses and physical test results are listed in this discussion, and remedies for some of the more frequently encountered deficiencies in apparatus and methods are suggested.

Report presenting a table of corrected optical pyrometer readings which enables optical pyrometer users to convert observed temperature immediately to the true temperature, if the effective emissivity of the material being observed is known. The table gives observed temperatures from 1,000 to 3,000ºK in increments of 5 degrees, from 3,000 to 5,000ºK in increments of 10 degrees, from 5,000 to 10,000ºK in increments of 50 degrees, and from 10,000 to 39,900ºK in increments of 100 degrees. For these, true temperatures are tabulated for 49 emissivities ranging from 0.02 to 0.98 in increments of 0.02.

Report presenting more than 500 references to the field of temperature measurement. These references were collected from two general sources: Scientific and technical literature and government reports. The period covered is from 1953 to June 1960, with some from earlier dates. References are divided into a number of categories based on the type of instrument used. Some references to calibration of instruments and to scientific theories upon which temperature measurement is based are also presented.

From Introduction: "An improved high-temperature gage was needed, and in an attempt to fill this need an investigation was initiated in February 1954 in the Enameled Metals Laboratory at the National Bureau of Standards. The present Monograph constitutes a final summary on this program."

Report discussing discrete energy levels observed within certain crystals which are due to perturbations of energy levels of the free ion by an electrostatic field arising from the crystal lattice. The analytic procedures for determining the field from the charge configuration are given, and the resulting fields are classified according to their symmetry. After a general survey of group-theoretical ideas, the applicable groups are analyzed in detail, and characters appropriate for both integral and half-integral angular momenta of the free ion are tabulated. Text includes tabulations, equations, and matrices using Wigner and Racah coefficients.

Report of the near ultraviolet and visible emission spectrum of CH presented in the form of a spectrophotometric atlas. The spectrum was recorded photoelectrically from an acetylene-oxygen flame in the region 4900 to 3000 A by use of a high-resolution grating monochromator. Each of the lines in the CH spectrum is identified.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

From Introduction: "This Monograph has as its purpose the compilation and analysis of the extensive radio refractive index data available within the Central Radio Propagation Laboratory of the National Bureau of Standards. This will be accomplished by presenting both tabulations of basic data for specific locations and charts for interpolation to any location."

Report providing detail measurements and percentages in charts, using three statistical parameters, for amplitude-probability distributions of atmospheric radio noise.

From Abstract: "This Monograph has been prepared to give an understanding of heat treatment principally to those unacquainted with this subject. This Monograph has been prepared to answer such inquiries and to give in simplified form a working knowledge of the basic theoretical and practical principles involved in the heat treatment of iron and steel."

Report giving tables of the specific heat, cp, and the enthalpy of 28 metals, 3 alloys, 8 other inorganic substances, and 8 organic substances in the temperature range, 1º to 300º K.

From Forward: "Although the first paper in this volume describes the general aspects of the technical management of the program, it is important to emphasize that much of success and productivity of this program stemmed from the sympathetic understanding of its basic viewpoint by both the Department of Defense and the National Bureau of Standards."

Report discussing wavelengths and estimated intensities in electrodeless lamp and spark sources presented for 15121 lines of ThI, ThII, ThIII, and ThIV in the spectral range from 2000 to 11550 A. Also contains tables of previously published interferometric values.

Report discussing how solids subjected to non-uniform temperature change develop internal stresses determined by, (1) the temperature distribution within the solid, and (2) certain physical constants of the material. For two varieties of heating, the equations determining stress have been put in convenient form for practical use, and tables of certain temperature functions show how to determine stresses in a slab, in a cylinder, or in a sphere subjected to either of two modes of heating. The temperature-distribution tables independently provide a useful means for the ready estimation of temperature gradients.

Reports discussing bands of common gases that have been tabulated and remeasured wherever necessary from 2 to 16 microns to obtain an accuracy of about 0.03 cm-1 throughout the region and to provide good calibrating points at frequent intervals. Some 600 rotation-vibration lines are illustrated in 20 spectrograms and wavenumbers are listed in companion tables with considerable intercomparison with worthy data obtained in other laboratories. The absorption bands were remeasured or calibrated by using either a precisely graduated grating circle or standard atomic lines with the fringe system formed by a Fabry-Perot interferometer. Characteristic features of the individual bands are discussed briefly and references to other publications are given. The substances used for calibration include H2O, CO2, CO, HCl, HBr, NH3, C2H2, CH4, N2O, and polystyrene film.

Report containing information regarding He4 vapor pressure measurement as of 1958, the recent history of the vapor pressure temperature scale, and a series of tables containing these measurements.

From Introduction: "The data are presented with the idea that an engineer who is making initial calculations on equipment for operation at cryogenic temperatures is more interested in obtaining quickly a definite figure that he in evaluating the experimental data given in several detailed reports on the same material. The graphs and tables presented here, consequently, represent an attempt by the authors to perform evaluation of data which have appeared in the literature and to present the design engineer with the result."

From Abstract: "Several dynamic determinations have been made of the constants of quartz. Most of these determinations do not take into account the piezoelectric effect; those that do, suffer from certain deficiencies which are discussed in this paper."

Report that briefly describes many of the models of crystal and molecular structures which have appeared in the literature, and presents a bibliography of the publications, grouped according to model types, which describe the models in more detail.

From Abstract: "The methods used at the National Bureau of Standards in calibrating line standards of length and measuring tapes submitted for standardization are outlined. The equipment used is described briefly. There is a discussion of some considerations that should be given as to whether or not a standard should be submitted to the Bureau."