Report presenting the fourth edition of the tables of the exponential function e(superscript x). Further indistinct numerals have been cleared up and several values have been adjusted to 2552 decimal places to conform to accuracy standards.

Report presenting tables for certain Bessel functions.

A handbook of mathematical functions that is designed to provide scientific investigations with a comprehensive and self-contained summary of the mathematical functions that arise in physical and engineering problems.

Report consisting of an expository account of the theory of modular forms and its application to number theory and analysis.

From Abstract: "The bibliography, a supplement to NBS Monograph 35, of the same title, covers the years 1960 to 1965, inclusive, and include 109 references for prior years not listed in Monograph 35. It contains 1787 references, 38 of which are to books. The references, besides those directly concerned with pressure measurement, include those on vacuum technology which may bear on the technique of vacuum measurement, such as on adsorption and desorption, diffusion of gases into solids, gas conductance and hardware such as pumps, seals and traps."

From Abstract: "This Monograph has been prepared to give an understanding of heat treatment principally to those unacquainted with this subject. This Monograph has been prepared to answer such inquiries and to give in simplified form a working knowledge of the basic theoretical and practical principles involved in the heat treatment of iron and steel."

From Abstract: "This Monograph contains a consistent set of tables of thermodynamic properties of a large number of diatomic hydrides, deuterides, and tritides, for the ideal gas state at one atmosphere pressure. In addition to the thermodynamic properties of the molecular gases, the tables also include thermodynamic properties for chemical reactions involving the isotopic exchange of hydrogen."

From Abstract: "The methods used at the National Bureau of Standards in calibrating line standards of length and measuring tapes submitted for standardization are outlined. The equipment used is described briefly. There is a discussion of some considerations that should be given as to whether or not a standard should be submitted to the Bureau."

Abstract: "These data are presented by element in part I, and all 39,000 observed lines are given in order of wavelength in Part II." From Introduction: "In the beginning, most intensity data were reported on an arbitrary scale of 10 steps, weak lines being assigned an intensity of 1, and the strongest line intensity 10."

From Abstract: "Comparisons with other intensity measurements in individual spectra indicate that the National Bureau of Standards spectral-line intensities may have average errors of 20 percent, but first of all they provide uniform quantitative values for the seventy chemical elements commonly determined by spectrochemists. These data are presented by element in part I, and all 39,000 observed lines are given in order of wavelength in part II."

From Abstract: "A calibration is applied to the intensity measurements of the 1400 lines below 2450 A in the NBS Tables of Spectral-Line Intensities. Tables of the new values are presented with the lines arranged by elements and by wavelengths."

From Introduction: "The purpose of this report is to present an analysis of time variations in: (1) the phase (relative to a stable phase reference) if a 9414 Mc/s signal transmitted over this path, referred to hereafter as single-path phase data; (2) the phase observed at one receiving antenna relative to that observed at an adjacent antenna, referred to as phase difference data; (3) atmospheric refractivity as recorded by a microwave refractometer located at the Haleakala terminal; (4) the wind velocity at both ends of the path, and (5) surface atmospheric refractivity measured at 5 stations located on or near the path."

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

Report documenting standard x-ray diffraction powder patterns for various compounds, intended to replace previous data or provide information for new substances. It describes the methods and, for each substance, outlines any previous data as well as information about the sample used and structural data, with a table of diffraction patterns.

From Introduction: "An improved high-temperature gage was needed, and in an attempt to fill this need an investigation was initiated in February 1954 in the Enameled Metals Laboratory at the National Bureau of Standards. The present Monograph constitutes a final summary on this program."

From Introduction: "The work of the Magnetic Measurements Section of the National Bureau of Standards includes (1) testing of specifically prepared test specimens intended for use as standards for checking magnetic testing apparatus (2) investigation and development of magnetic testing apparatus (3) calibration of mutual inductors, test coils, and instruments for measuring magnetic fields, and (4) investigations in the field of magnetics such as studies of phenomena associated with nuclear magnetic resonance or the selection and testing of materials suitable to be used as standards of magnetic susceptibility."

From Abstract: "This report describes the use of an air-filled aluminum-alloy ionization chamber to determine the energy transported by a bremsstrahlung beam with maximum photon energy in the range 6 to 170 Mev. This report can be used to construct a replica chamber to determine its absolute calibration between 6 and 170 Mev under a variety of experimental conditions."

From Introduction: "The recent acceptance by physicists and chemists of new values for the fundamental constants and the continued demand for expanded and convenient tables prompted the recomputation and preparation of this volume. The authors have tried to incorporate this work a number of the more desirable features of the above-cited works, particularly with respect to their use in calculations involving: Thermodynamic properties of gases; specific heats, electrical and thermal conductivity of solids; and molecular structure and spectroscopy of diatomic and polyatomic molecules. It is the hope of the authors that formal character of this publication will insure a more adequate notice and dissemination than was accorded the earlier works, thereaby reducing the probability of still further duplication of effort."

From Synopsis: "This paper deals mainly with cement paste in terms of its porosity, internal surface area, interaction between solid substance and evaporable water and related properties."

From Abstract: "The results of an investigation of lightweight, precast cellular concrete planks are given. Fire tests were made of two floor and five roof specimens made up of these planks. Variables, included density of the cellular concrete, thickness and span of the planks, reinforcement, and cover for the latter."

From Abstract: "The electric field is plotted and its construction steps for axial symmetry are given."