Quarterly report describing progress on the EVESR Nuclear Superheat Fuel Development Project.

Quarterly report describing progress on the EVESR Nuclear Superheat Fuel Development Project.

The design status of the Experimental Fast Ceramic Reactor (EFCR) is described for the period up to October 31, 1961. The primary purpose of the facility is to study the dynamic behavior of a fast ceramic reactor, including the experimental demonstration of the effectiveness of the Doppler coefficient in limiting the power excursion following a rapid insertion of reactivity.

Experimental investigations were conducted to obtain additional information on the growth and characteristics of sodium oxide deposits in liquid sodium which could lead to system plugging. These investigations included the removal of sodium oxide from molten sodium by the cold trap method.

Summary: On the basis of its high temperature, physical and corrosion properties, Incoloy Alloy 800 was selected as a candidate for fuel cladding nuclear superheat applications. At the time of its selection, there was little information or experience with Incoloy 800 in the production of thin-walled, small diameter tubing suitable for nuclear fuel cladding. As a result, special purchasing efforts were required for the procurement of initial tubing used in fuel fabrication. As-received welded and drawn tubing proved to be generally good but showed some conditions which were undesirable, the major one being lack of complete recrystallization and homogenization of the weld zone. The possible effect of this condition upon the fuel performance was not immediately known; however, subsequent development work indicated that the non-homogeneity of the weld could affect adversely its mechanical and corrosion properties in relation to the parent metal. A development program was initiated to determine treatment sequences suitable for the fabrication of welded and drawn tubing with a fully recrystallized and homogenized weld structure. This was accomplished by butt welding lengths of Incoloy strip which were subsequently cold rolled and annealed to simulate tube fabrication steps. Requirements imposed on this work were that all processes developed …

The raw materials and fabrication procedures employed in preparing thirty two zirconium alloy compositions for evaluation as described in GEAP-3979 are reported. Considerations involved in the extension of reported laboratory procedures to larger scale production are discussed.

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

Quarterly report discussing progress on the Fast Ceramic Reactor Development Program, "an integrated analytical and experimental program directed toward the development of fast reactors employing ceramic fuels, with particular attention to mixed plutonium-uranium oxide" (p. 1).

This document presents the results of investigations concerned with the conceptual design of a 300 KWe "Capsule" nuclear power plant.

A program of free-surface steam-water separation at 600 psig was carried out in support of the design for operation of the Experimental Boiling Water Reactor at 100 MW thermal. Reduced test data are presented without evaluation since the ANL technical representative received an original copy of the data for evaluation with respect to the EBWR design.

A digital computer program, FORE, which calculates transients for a fast reactor, has been coded for the TRANSAC 2000 computer. Its purpose is to provide understanding of the dynamics of fast reactors with particular emphasis on large ceramic-fueled fast reactors. The program calculates reactor power and temperatures of fuel, coolant, clad, and structure.

The Fuel Cycle Program is an integrated program of investigation in the Vallecitos Boiling Water Reactor (VBWR) and other facilities to improve the technological limits of boiling water reactors in several areas. This report presents updates on tasks related to those areas.

The Fuel Cycle Development Program is a basic development program of boiling and other water reactor technology. This is the first report to the U.S. Atomic Energy Commission of activities carried out under this program. It constitutes a review of the progress from April 27, 1959 through July 31, 1960.

The Fuel Cycle Program is an integrated program of investigation in the Vallecitos Boiling Water Reactor (VBWR) and other facilities to improve the technological limits of boiling water reactors.

The Fuel Cycle Program is an integrated program of investigation in the Vallecitos Boiling Water Reactor and other facilities to improve the technological limits of boiling water reactors in several areas. Progress is reported here.

This report summarizes progress on investigation into improving the technological limits of boiling water reactors, Vallecitos Boiling Water Reactor and other facilities.

Technical report describing sixteen fuel rods clad with thin type 304 stainless steel and filled with vibratory compact powder UO2 that were fabricated and incorporated into a bundle for irradiation testing in the VBWR. The UO2 powders were tested for gas content. N2, CO, and H2 were the principal gases evolved by both type of UO2, but the arc-fused UO2 released about ten times as much gas as the Dyna Pak UO2. The amount of gas released was also a function of particle size and temperature. The gas evolution data were used to design the gas plenum to accommodate the absorbed gases along with the fission gases.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities

Abstract: Three irradiation experiments are described which have been designed to study the behavior of fuel elements in a reactors superheated steam environment. The experiments were conducted in the Superheat Advanced Demonstration Experiment loop, Vallecitos Boiling Water Reactor. The results obtained demonstrated that 304 stainless steel fuel clad in unsatisfactory for use in nuclear super heat fuel sheath designs where plastic strain or plastic deformation is allowed to occur. The results were in agreement with those reported for a previous experiment in SADE (SH-4B) and constituted the basis for change in direction of the superheat fuel program in regard to both design and fuel sheath selection.