In order to perform the various experiments with a bubble chamber, a high intensity flash tube is used. This report briefly describes the power supplies designed and constructed to power these lamps.

The power supplies designed and constructed to power high intensity flash tubes used in bubble chamber experiments are briefly described and are accompanied by a schematic diagram of the layout. (D.C.W.)

Since the discovery of the Straub and Feuer as well as Laki et al. that ATP bound to G-actin is transformed to ADP and inorganic phosphate during polymerization of actin (1, 2), it has become increasingly clear that the chemical changes in the nucleotide are related to the change in the physical state of the protein. Barany, Biro, Molnar and Straub have shown that highly purified actin preparation free of any enzyme which would use ATP, ADP or AMP as a substrate still catalyze the breakdown of ATP (3) thus supporting the original idea that the ATP to ADP transformation is related to the globular to fibrous transformation of the actin protein itself. Mommaerts was the first to show that the ADP formed during polymerization remains bound to F-actin and Ulbrecht et al. while extending Mommaert's finding on exhaustively purified actin preparations have shown that the P1 formed during polymerization is not bound to F-actin. The stoichiometry of the splitting and the tightness of binding of the ADP lead inevitably to questions in regard to the position of bond breaking during the hydrolysis and to the nature of the forces involved in the tight binding of ADP to F-actin. To …

The scope of the AGS complex has expanded rapidly during the three years since an accelerated beam was first obtained. Demand for research time far exceeds the amount available although facilities have been much increased. At the same time, experiments are being designed which are more complicated than previous ones and which make more stringent demands on the accelerator and on its auxiliary equipment. There is a continuous trend of experiments to particle beams of greater momentum, as the experimental techniques are refined. This use of increased momentum means that larger areas are required for the apparatus and that more power is necessary for the magnetic optics. All beam-sharing at the AGS is done by multiple use of each accelerated pulse because our experience indicates that pulse-by-pulse beam-sharing is relatively inefficient. (Expansion chambers have seldom been used at the AGS.) The problems of scheduling experiments becomes increasingly complex since combinations must be found satisfying the criteria: maximum number of experiments to run simultaneously; minimum downtime to be taken for rearrangement between successive experimental arrays

"An algorithm for the generation of feasible schedules and the computation of the completion times of the job operations of feasible schedule is presented. Using this algorithm, the distribution of schedule times over the set of feasible schedule—or a subset of feasible schedules—was determined for technological orderings that could occur in a general machine shop. These distributions are found to be approximately normal. Biasing techniques corresponding to “first come first serve,” random choice of jobs ready at each machine and combinations of these two extremes were used to compute distributions of schedule times."

The favorable combination of physical properties such as heat capacity, viscosity, electrical resistivity, thermal conductivity and high temperature liquid range make alkali metals, in principle, among the best heat transfer fluids available for use in nuclear reactor and other esoteric powerplant systems. Unfortunately, many of these properties are not known with sufficient certainty in the high temperature region to permit optimization of design criteria for developing maximum efficiency coolant systems. For this reason, Pratt & Whitney Aircraft-CANEL, have been concerned for some time in extending the physical properties data of alkali liquid metals in the high temperature region. A supplemental program is being initiated to study some of the properties of alkali metals in the gas phase. This information is required for designing systems where the alkali vapor is the working fluid. In addition, programs are under way to study the solubility of noble gases in alkali liquid metals and wetting characteristics of these liquid metals with structural materials.

Introduction: The literature reflects ever expansive studies of radiation chemistry over the past twenty years However, in the application of radiation processing to chemical reactions, in general and excepting a few isolated cases, the yield of useful products have been so low as to preclude practical utilization. Thus, for many reactions,radiation alone at ambient conditions is not a sufficient agent for economical production. Hence, we are led to the investigation of radiation effects on reactions at elevated temperatures and pressures where the thermodynamics favor more extensive reactions that may be induced by radiation. the probability of developing a successful practical radiation process is increased when applying radiation at rigorous conditions. To have a commercial advantage, a radiation process usually must replace an expensive catalyst system, generate a reaction at somewhat less rigorous conditions than is usually employed or yield a better or unique product of high value. In our investigations, we have examined only the potential of radiation as a replacement for contact catalyst. Results: We have worked with coal extract rather than coal because it can be melted or dissolved to facilitate pumping into the processing unit and, in general, permits easier handling than a solid. From numerous radiation …

BOUNCE III is a program which was written for the IBM-704 as part of a study of the parameters of the neutron distribution in a large thermal column. The program calculates the eigenvalues and corresponding eigenvectors of the matrix resulting from a diffusion-theory, multigroup description of the thermal neutron spectrum.

Abstract: The acid hydrolysis of [Pt(NH3)3Cl] has been shown to occur to a measurable extent. for this reaction: [APt(NH3)cCl]+ + H2O [chemical equilibrium symbol with rate constant k-1 above and k1 below] [Pt(NH3)c(H2O)]++ + Cl-, the equilibrium quotient was measured at 25 degree C and 35 degree C. At 25 degree C this quotient was 8.4 x 10-5 at [Mu] (ionic strength) = 0 and 25 x 10-5 at [mu] = .318 M. This variation is consistent with the expected changes in activity coefficients. [Delta]H for the reaction was found to be approximately 0. The rate constant, k1 was 2.3 x 10-5 sec.-1 at 25 degree C and it was nearly independent of ionic strength. The acid hydrolysis provides a mechanism for the exchange of the chloride ligand and Cl-. Exchange experiments with Cl36 showed that in addition to the acid hydrolysis, a process, first order in both, [Pt(NH3)3Cl] and Cl- with a rate constant of 6. 10-5 sec.-1M.-1 contributes to the exchange. The behavior of the entire series of chloro-ammines of platinum(II) toward acid hydrolysis and chloride exchange has been summarized, and a likely mechanism for the process has been discussed.

Description of a computer program which optimizes the locations and strengths of magnets for experimental beams at the Brookhaven AGS written for the IBM 7090 computer. Layout, method, and routines are given particular attention, and representative data cards are shown.

In the vast field of radiation pathology we find pathologists, anatomists, and even physiologists busily at work, but the radiobiologist is conspicuously absent, although, according to Zirkle (1959), this field is clearly within his domain. Perhaps it is wise to take this broad hint of the scientifically so well equipped radiobiologist and to stay clear from an area in which an incalculable array of variables makes clearcut experimentation a hopeless venture, a priori. Perhaps it would be better if the pathologist, who must study pertinent material, restricts himself humbly to the recording of his observations, refraining from any attempt at interpretation. On the other hand, since seemingly audacious speculation has borne fruit in the past and the value of the information that results, if the speculation proves to be correct, is worth many times the effort, there is obvious justification for a thesis on the mechanism of delayed radionecrosis.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

Activities in a program to develop techniques in the use of pulsed neutron sources to measure shutdown parameters related to large thermal power reactors are reported. The development of pulsed neutron source techniques for large power reactors has led to a new theoretical model recently developed by E. Garelis and J.L. Russell, Jr. The theory is presently based on a bare, one-group model with m-delayed precursors and takes all spatial modes into account. Results indicate, however, that the application of this model is much broader. Experiments were designed and carried out to both verify this new theory and to demonstrate the performance of the experimental hardware in a large power reactor.

"Adlam and Allen and Davis, Lust, and Schluter have studied nonlinear plane-waves, propagating normal to the magnetic field, in a cold plasma. One solution of particular interest is a solitary wave, or single pulse. We present a method for solving the analogous problem for a plasma with finite temperature, in the limiting case where the amplitude of the wave is small and where, consequently, the width of the waver is very large."

From abstract: "This program was a study of the basic variables that affect electrostatic classification of heterogeneous aerosols of submicron size, especially below 0.1 [mu]."

Summary: A prototype control rod containing absorber plates made from an electro- deposited dispersion of boron carbide in nickel was tested in the VBWR. It was exposed to the reactor environment of 545 degree F boiling water and thermal neutron fluxes (perturbed) which ranged from 0.6 to 1.1 x 10/sup 13/ nv for 2236 hours over a period of six months. The maximum B/sup 10/ burnup achieved during the test period was 1.8 percent. After irradiation, the rod was examined. The results of the examination are summarized below: (1) The B/sub 4/C-- Ni plate assembly did not undergo significant dimensional changes during irradiation. (2) Numerous blisters developed on both the outer and inner surfaces of three of the four plates. Blistering was more severe on the outer surface than on the inner, and was most severe in a large region located in the lower half of plate 4. Metallographic examination revealed that the blisters were located only in the 2- mil protective nickel overlay covering the B/sub 4/C-- Ni dispersion. It was concluded that they formed from the buildup of gas pressure at the Ni: Ni-- B/sub 4/C interfaces, rather than from corrosion attack. Helium from the B/sup 10/(n alpha …

"We compute the equilibrium configuration of a collision-free plasma contained in an axially symmetric magnetic field. The plasma is characterized by a non-scalar pressure tensor which is obtained from a microscopic distribution function in a form suggested b the guiding center approximation. The solution is calculated in the limit where the ratio of the width to the length of the plasma region and the ratio of the gas to the magnetic pressure are both small. Boundary values at the midplane as well as the shape of the plasma appear as arbitrary parameters in the solution. We give the solution to a corresponding scalar pressure problem for comparison."

Introduction: This is a final report on the evaluation of Kanigen electroless nickel plating for surfaces in contact with water and steam i a sodium heated AISI Type 316 stainless steel steam generator. The purpose of the coasting was to afford protection from stress corrosion cracking originating on the water-steam side of the unit. It has been concluded that the kanigen coating does not afford adequate protection for the services condition intended. This work was performed as part of the research and development program for the United States Atomic Energy Commission sodium Components Design Project.

The duration of mitosis is of great importance in an evaluation of growth rates in proliferating somatic tissues, since calculations are based on observations of mitotic activity, and therefore final results are directly proportional to an assumed value for mitotic time. This duration cannot be measured directly in vivo at a tissue level, since the mode of distribution of the single cell value is not known. This difficulty is not overcome in extrapolations from in vitro measurements. Also it is not overcome with the labeling of proliferating cells after tritiated thymidine injection in vivo if subsequent observation is limited to the rate of progression into mitosis of labeled cells that incorporated the tracer during the period of DNA-synthesis. Observation of separate mitotic phases, however, offers the possibility of following the progression of the wave of labeled cells at successive, short-lasting checking steps, and to analyze the variability in the times of passage through mitosis. In the present work, the progression of labeled cells as a function of time, after a single injection of tritiated thymidine, was followed in successive phases of mitosis in erythroblasts of dog bone marrow.

This document reports progress during the month of February, 1961, recording investigations and studies of a flow rate using a curved pipe or S-tube and documenting measurements of mass flow, tube design and construction.

This document presents the results of investigations concerned with the conceptual design of a 300 KWe "Capsule" nuclear power plant.

Quarterly progress report discussing activities related to the Vallecitos Boiling Water Reactor (VBWR) and related facilities.

Abstract: (1) Grain growth in UO2 pellets was studies between 100 C and 2600 C. The pellets were encapsulated in small vacuum-tight tungsten containers in an argon atmosphere. (2) The grain size-time relationship could be expressed by an equation. A low exponent, m>_ 1/3, was found in those experiments and is related to the type of UO2 investigated. An activation energy of 65 kcal/mole was obtained for the grain growth process. The time exponent, m, increased with increasing temperature if the pellets were not contained in closed capsules bu heated under an argon pressure of 1.5 atm. (3) An interaction between tungsten and UO2 could be observed at a a temperature of 2600 C after prolonged heat treatment.

Abstract: In the March-April 1962 shutdown of SM-1 Core II, the SM-28 element will be re-inserted in SM-1 Core II and an SM-1 Core I element will be removed. An SM-1 Core II europium absorber will be replaced by a Ag-Cd-In absorber, and surveillance specimens will be inserted above the core support structure. Analysis of these changes concludes that re-insertion of the SM-2B stationary element and insertion of surveillance specimens do not affect hazards potential previously defined for SM-1. Replacement of the europium absorber by the Ag-Cd-In absorber will have negligible effect on reactivity control worth of the rod. The absorber meat section is encapsulated to prevent exposure of silver alloy to the primary coolant; postulated release of silver due to a cladding defect, after 2 years irradiation in SM-1, would not cause a hazard such as to restrict access to the vapor container. Possibility of steam formation in the air gap between the absorber core and cladding, causing a cladding failure, is remote. Deformation of the absorber section sufficient to cause the rod to stick, would not impair the ability of the other rods to shut down the reactor safely.