The following report discusses the method of rolling uranium rods and strips under various rolling conditions and the roll-separating force measured.

Abstract: "Aluminum electroplating was studied in a search for new methods of cladding uranium fuel elements. Uranium electroclad with 12 mils of aluminum over a 0.5-mil (or nickel plus copper) electroplate resisted corrosion for more than 100 hr in boiling water. This quality of protection was effected by hot pressing the electroclad uranium with 5.1 tons per sq in. for 5 min at 950 F. The electroclad uranium with hot-pressed samples paralleled those of later experiments with hot-pressed wrought aluminum claddings on uranium. In both cases, the uranium was electroplated with thin (0.5 mil) layers of metals to prevent aluminum-uranium diffusion, to aid bonding, and to assist in corrosion protection. This aluminum electroplating study helped to define the importance of the intermediate coating between the aluminum and the uranium, the effect of good bonds between the various layers, and the effects of hot pressing in protecting uranium with an aluminum cladding."

From abstract: "The effects of solution concentration and acidity on extraction of uranium by diethyl ether have been investigated... The approximate solubility of vanadium pentoxide in nitric acid was determined."

From abstract: "Results of tests investigating the effects of feed and scrub acidities on the extraction of uranium and contaminants from process slurries by tributyl phosphate-Gulfspray Naphtha in a Scheibel continuous extractor are described. Studies on the fractional precipitation of MgX from a dilute sulfuric acid system throw considerable light on the probable constitution of MgX. Further data on the effect of acidity on the extraction of molybdenum and vanadium into ethyl ether are presented.

This report is the final in a series of preliminary reports that follow the studies of scavenging systems related to radioactive fallout. The project consisted of two phases: preliminary experiments to relate the sizes of particles in air to specific radioisotopes, and preliminary laboratory studies of scavenging of particles by liquid drops, including studies of sticking probability and effects of Brownian motion and water vapor diffusion.

From abstract: "Results are presented of Scheibel column extraction tests with neutral ether on a variety of combinations of feed solutions...The effect of added iron was evaluated for a considerable number of process solutions and slurries. Arsenic was traced through both primary and secondary extraction stages in one test."

From abstract: "Results are presented which suggest the possibility of satisfactorily extracting uranium from pitchblende feeds with neutral ether, without the necessity of removing sulfate, by the addition of a sufficient quantity of iron to the feed." Other factors' effects on extraction were tested and arsenic was traced throughout extraction.

Abstract: "Rare-earth analyses were performed on several samples of refined uranium oxide and nitrate, using a modified cellulose column procedure. Rare earths were not detectable in samples of 0.03 shotgun of less. Detection limits were from 0.0005 to 0.015 ppm. Negligible quantities of low-cross-section rare earths were found in less pure uranium samples, obtained during start-up operations of the pilot plant at the Feed Materials Production Center, primarily those rare earths of greater than average abundance in nature. No correlation was found between rare-earth content and shotgun values. Rare earths do not appear to be contributing significantly to the neutron absorption of refined uranium. A modified cellulose column procedure, which includes a preconcentration solvent-extraction step, is described. Radioactive tracer tests indicating rare-earth recoveries by the method of >98 per cent are reported."

Abstract: "Additional work on the flotation of sulphides from high-sulphur pitchblende is described. Data needed for the selection of flotation equipment are presented."

This report discusses a study regarding the properties of uranium with added chromium, silicon, or titanium. This study was conducted in order to evaluate the effects of alloying on the mechanical properties of base metal.

From abstract: "The internal friction of recrystallized uranium has been shown to depend directly on heating and cooling rates and on the rate of application or removal of an external stress during measurement. At zero heating or stress rate, the internal friction falls to a low value and appears to decrease indefinitely at room temperature. Micrographs showing twin disappearance on removal or reversal of load are shown...It is concluded that the various internal-friction phenomena are the result of the stress-induced motion of twin boundaries." Results are compared with similar studies as well.

This quarterly progress report discusses the ongoing work within the Solid State Division at the Oak Ridge National Laboratory for the period ending August 10, 1952. Projects discussed include radiation metallurgy, engineering properties, fused salts, crystal physics, and solid state reactions.

From abstract: "Data obtained in laboratory studies of the 'fumelses dissolving' of irradiated uranium are presented. Procedures for handling dissolver off-gases are proposed."

This quarterly progress report discusses topics of research and experimentation at the Oak Ridge National Laboratory, including inorganic chemistry, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, chemistry of the solid state, instrumentation, reactor chemistry.

The following report discusses a survey of seventy-seven interactions of K- mesons in flight in nuclear emulsion with seven decays in flight, and finding four inelastic scatterings.

Abstract: Experimentally measured promp-neutron decay constants for sub-critical systems are of considerable value as normalization data for calculations of prompt-neutron time constants. A method of measuring these decay constants with a pulsed neutron source, neutron detector and multi-channel time-delay analyzer has been developed and used on a number of fast-spectrum subcritical systems. An analysis of this method based on the one-energy group, one-delayed-neutron group reactor kinetic equations is presented and discussed. The curve of neutron flux versus time predicted by the kinetic equations is compared with the observed curve obtained with a 13.1-cm. diam. enriched-uranium sphere to indicate the application and limitations of the analysis.

From abstract: This bibliography consists of references pertaining to "Effects of Nuclear Radiation Upon Electronic and Electrical Components", and to "Electronic and Electrical Components for Critical Environments". References were compiled from the Classified and Unclassified report literature and the published literature. The following indexes and abstract journals were used: Weapons Data Index, AEC Card Catalog, Engineering Index (1950-55), and Office of Technical Services, Research Reports (1956-March '57).

Abstract: "The free energy (surface tension) of a liquid film can withstand atmospheric pressure across a maximum theoretical gap of 10-(-3) cm between solids if the liquid wets and bridges the sides of the gap continuously. The eutectic alloy of Ga, lm and Sm is used for this purpose. This alloy is molten at room temperature with surface tension > 500 dynes/cm, vapor pressure < 10-(-8) cm at 500 C and excellent wetting properties. This alloy can be utilized in valves, motion seals, flanged joints and for electrical contacts mounted in any position. Using ultrasonic soldering techniques without heat or flux this alloy is readily wetted on W, Mo, Ta, pyrex, quartz and certain ceramics. These materials will withstand the corrosive action of this alloy at at least 400 C. Some de-wetting has been observed with only the nonmetals at high temperatures. This de-wetting may be due to thermal decomposition of gallium oxide. Stainless steel is easily wetted, but is attacked at temperatures above 300 C. Copper and brass are attacked at room temperature."

The following report is based off of one of the author's lectures on the physics of plasma, or ionized gases, which was given on July 16, 1954.

Abstract: "A magnetohydrodynamic model of a plasma-magnetic field instability, using liquid sodium, has been observed. The growth rate and wave length of the Taylor-type acceleration instability was observed to be in agreement with the theory of Kruskal and Schwarzschild."

Introduction: This note describes briefly the current concept of the experimental program on source development for mirror machines. There are two major facilities involved: (1) A comparatively small machine whose code name is "Guppy", and, (2) A larger d.c. mirror geometry whose code name is "Waldo."

Abstract: "A magnetohydrodynamic model of plasma-magnetic field instabilities, using liquid sodium, has been observed. The growth of flutes in the mirror geometry was observed for the case of [beta] = NKT/H²/8w = 1."

Report discussing the use of a small-source approximation for engineering calculation of thermal piles. Explanation for how this type of approximation is more appropriate in certain problematic situations where a homogenization approximation would be doubtful is given.

The following report describes the workings and development of the nuclear ramjet propulsion systems.