From abstract: "Relocation of the ion source in the 86-inch cyclotron has increased the available beam energy substantially. Modifications have also been made to permit the use of targets of 100 square inches. Proton currents of one milliampere can now be obtained readily at ~24 Mev. The 63-inch cyclotron has been completely assembled and checked. In rf tests a 75 kv dee-to-dee voltage has been maintained, under vacuum, for long periods without evidences of failures, thus exceeding the 60 kv design specification. In an investigation of proton beam distribution on the 22-inch cyclotron it has been shown that almost all of the loss of protons form the beam occurs within one-half of the maximum radius. The ration of H3+ to H1+ ions in the beam increases at lower at lower arc intensities in the ion source. Accelerated corrosion was found in an Inconel tube containing #14 eutectic (ARE) after a six-hour bombardment with 20 Mev protons at 4,500 watts/cc. Installation of facilities for the preparation of plutonium isotopes is nearing completion; preliminary tests are being made."

Report containing tables of the Racah Coefficients.

From introduction: "During the second quarter of fiscal year 1952, the Isotope Production and Process Development Department placed primary emphasis on the collection of lithium, iron and calcium isotopes."

The first part of this quarterly progress report details reactor theory and design, discussing the aircraft reactor experiment, experimental reactor engineering, reactor physics, and critical experiments. The second part of this report is not included. The third part of this quarterly progress report details materials research, discussing corrosion research, physical properties and heat-transfer research, metallurgy and ceramics, chemistry of high-temperature liquids, and radiation damage. The fourth part of this quarterly progress report details alternate systems, discussing a supercritical water reactor, circulating-moderator-coolant reactors. The fifth part of this quarterly progress report includes appendixes.

Technical report focusing on the Homogeneous Reactor Experiment (HRE) construction, completed 60% as of August 15, 1951. Report also includes alternate systems studies and long range studies of the Homogeneous Reactor Experiment. Technical report is organized in three parts. [From Summary]

From abstract: "Operation of the 86-inch cyclotron has been continuous except for a three-day interruption caused by a water leak inside the vacuum chamber; monthly output has averaged over 210,000 [mu]a-hr; the average continuous (168-hour week) beam power has been approximately 5.5 kw; and the energy of the beam has been determined to be ~19.4 Mev. No changes due to radiation damage have been detected in Inconel tubes containing UF4-NaF-KF eutectic which were irradited in the 96-inch cyclotron with power inputs up to ~415 watts/cc. The major components of the 63-inch cyclotron have been fabricated and are being tested as the machine is being assembled. On the 22-inch cyclotron a radius-wise examination of the fine structure of the proton beam reveals definite proton orbits. Several grams of very pure uranium 235 have been prepared; the chemical recovery for first-stage separation of U 236 has been established as 97%; and facilities for laboratory-scale separation of plutonium isotopes are being prepared."

From abstract: "The reaction between hydrogen and oxygen with the aid of various catalysts (especially platinum on aluminua) has been studied, and the operating variables such as flow rates, space velocity, temperature, and gas composition have been examined rather extensively. It has been found that hydrogen and oxygen in stoichiometric proportions and mixed with either steam or helium may be made to react to the extent of 99.5% or greater at space velocities up to 30,000 hr-1, or even higher, at temperatures from 100[degrees] to 900[degrees]C, and with mixtures ranging from less than 1% hydrogen to mixtures containing 12% hydrogen and 6% oxygen. Richer mixtures, including undiluted electrolytic gas (H2 + 1/2 O2) have been used with catalysts less active than platinum (e.g. copper, silver, nickel and V2O5) but here the gas mixture is explosive and care must be taken to prevent explosions. The thermal reaction between hydrogen and oxygen diluted with steam has also been investigated at temperatures between 500[degrees] and 800[degrees]C."

This technical report presents "a theoretical study of the motion of gas bubbles in a rotating liquid" in order to "make comparison with experimental data from an investigation concerning the removal of gas bubbles from rotating liquids as descriped in ORNL-630." The report presents a literature review of "motion of gas bubbles in liquids" and provides a "summary of extensive experimental studies at the University of Tennessee." It also presents "an expression for the radial velocity of a gas bubble in a rotating liquid based on principles of mechanics." Finally, this report presents "a method for computing the steady state state [sic] gas hold-up in the HRE reactor core under power producing conditions." (From introduction)

Technical reports outlining the controls for the Homogeneous Reactor Experiment (HRE); controls are divided into three principal groups. 1. Reactor. 2. Process or auxiliary. 3. Power generation. These are the classifications designating the primary functions of the controls. [From Introduction]

This progress report discusses the work during the fourth quarter of 1951. During this quarter, "the uranium raw materials program at ORNL has been devoted to studies of uranium chemistry and to the development of processes for deriving uranium and byproducts from various types of ores" (From introduction).

Technical report outlining the effect of strain rate on the tensile properties of thorium. It has been found that the yield strength increases slightly with increasing strain rate, and that tensile strength increases but to a less extent. Studies on the fabrication of thorium by extrusion and drawing have continued, as have studies on the extrusion cladding of thorium and uranium with zirconium. [From Summary}

Quarterly technical report including reports on chemistry of source, fissionable, and structural elements, nuclear chemistry, radio-organic chemistry, chemistry of separations processes, chemical physics, radiation chemistry, and instrumentation of the Chemistry Division of the Oak Ridge National Laboratory (ORNL). [From Abstract]

Technical report covering experiments happening on the Analytical Chemistry Division's sites at the Oak Ridge National Laboratory. Includes information on ionic analyses, radio-chemical analyses, spectrochemical analyses, service analyses, inorganic preparations, analytical chemical control of homogeneous reactor solution, optical and electron microscopy, and service analyses for the period ending September 10, 1951. Studies and happenings took place on the Analytical Chemistry Division's X-10 and Y-12 sites. [From Table of Contents, Abstract]

This quarterly progress report details the ongoing research and experiments at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. The first part of this report discusses reactor theory and design. The second part of this report is not included. The third part of this report discusses materials research. The fourth part of this report includes appendixes

From abstract: "A full-scale, always-safe, metal dissolver for Experimental Breeder Reactor fuel was designed, built, and installed for test operation. It was found that the dissolver operated satisfactorily, and feasible operating procedures were established for the dissolution of bare, or jacketed, EBR slugs. Minor modifications of the dissolver design have been required to accomodate [sic] a modified EBR slug, but it is believed that this will not significantly affect its operating characteristics."

From abstract: "This report summarizes the corrosion data obtained for nine construction materials located throughout the ORNL Purex Pilot Plant Acid Recovery Unit during seven hundred hours of operation."

From abstract: "This report presents the progress in the laboratory development of a continuous solvent recovery process for the tributyl phosphate-diluent mixture used in the Purex Process. Investigations were made with 1/2" diameter pulse columns, using a nine foot sodium carbonate contacting column and a four foot water wash column."

From summary: "Construction of the HRE facility was essentially complete on November 15, 1951 except for minor revisions and final testing. A program of engineering and nuclear tests of the system hasbeen drawn up, and the tests will be started early in the next quarter. The only major HRE items for which design is not complete are the samplers for the fuel, [gas], and reflector systems. These will be completed in time to be installed before critical experiments begin; meanwhile, temporary sampling devices have been installed for use during the testing program."

From abstract: "The following report presents a summary of operating experience with decelerating receivers for ion beam reception. Sample calculations for design of such a receiver for the isotopes of lithium are presented. Estimates of maximum production and requirements to attain such production are given. The maximum ion beam envisioned is 17 amperes obtained from extrapolation of experimental results."

From abstract: "Two samples, each containing an estimated 10 curies (2 mg) of polonium-210, were purified by vacuum distillation and evaporated onto oblique sections of X-ray targets made of copper. Four lines of the K series and ten lines of the L series of the X-ray spectrum of polonium were recorded with a one-meter transmission crystal spectrograph and a 25-centimeter Bragg spectrograph, respectively. Measured wavelengths agree approximately with values predicted by extrapolation of Moseley's law and with those claimed by Hulubei. Decay of polonium-210 (half life = 138 days) and growth of lead-206 (stable) were observed over a period of 180 days."

This quarterly progress report discusses ongoing research and experiments at Oak Ridge National Laboratory in the Metallurgy Division. This report discusses thorium research, the mechanical properties of metals including thorium, uranium, inconel, and z-nickel, the ANP program (including the following topics: the physical chemistry of liquid metals, and welding research), and the materials testing reactor program.

This progress report discusses new additions to the Mathematics Panel and discusses new and further work happening at Oak Ridge National Laboratory relating to the Mathematics Panel, of particular note is the Oak Ridge computer which is being fabricated at Argonne National Laboratory and the Technitrol Company.

From abstract: "Data obtained in laboratory studies of the 'fumelses dissolving' of irradiated uranium are presented. Procedures for handling dissolver off-gases are proposed."

From abstract: "This report describes the decontamination of Oak Ridge National Laboratory Purex Pilot Plant facilities and presents an appraisal of the decontaminating techniques and reagents which were employed."