Report presenting an investigation at supersonic speeds of some of the factors affecting the flow over a rectangular wing with a symmetrical circular-arc section and a 30-percent-chord trailing-edge flap. The main purpose is to obtain more information on which to base the design of supersonic controls. Results regarding the effect of Mach number, effect of wing thickness, effect of fixing transition, effect of sealing the hinge gap, effect of model surface condition and asymmetry, and shock boundary-layer interaction are provided.

This report follows work that is meant to determine the settling rate and viscosity of Hanford Waste metal slurry as a function of prolonged agitation and shear, and to repeat these determinations on a synthetic incubated material similar to that used in the acidification studies, HW-18367, and to make a direct comparison between the genuine and simulated wastes.

Report presenting an investigation in the supersonic tunnel at Mach number 1.85 and angles of attack from 0 to 5 degrees to determine optimum design configurations for a convergent-divergent type of supersonic diffusers with a subsonic diffuser of 5 degrees included divergence angle. Total-pressure recoveries in excess of the theoretical recovery across a normal shock at a free-stream Mach number of 1.85 were obtained with a number of configurations.

Report presenting testing of a wing-body combination with a plane triangular wing of aspect ratio 2 and NACA 0003-63 sections in streamwise planes at subsonic and supersonic Mach numbers. Lift, drag, and pitching moment are presented for a range of Mach and Reynolds numbers.

Report presenting an investigation of a wing-body combination with a plane triangular wing of aspect ratio 4 and NACA 0005-63 sections in streamwise planes at subsonic and supersonic Mach numbers. Lift, drag, and pitching moment are presented for a range of Mach and Reynolds numbers.

"A wing-body combination having a triangular wing of aspect ratio 4 with NACA 0005-63 thickness distribution in streamwise planes, and cambered and twisted for a trapezoidal span distribution has been investigated at both subsonic and supersonic Mach numbers. The lift, drag, and pitching moment of the model are presented for Mach numbers from 0.25 to 0.96 and 1.20 to 1.70 at a Reynolds number of 1.5 million. The variations of the characteristics with Reynolds number are also shown for several Mach numbers" (p. 1).

Report presenting an investigation to determine the effects of several design changes on the performance of large-capacity, double-entry, centrifugal compressors. Four modifications of a turbojet engine compressor were operated over a range of equivalent impeller tip speeds an the compressor overall and component performances were determined. Results regarding the impeller performance, diffuser performance, and compressor performance are provided.

Report presenting a study in the 8- by 6-foot supersonic wind tunnel of the performance of a 16-inch ramjet engine at zero angle of attack and over a range of free-stream Mach numbers between 1.5 and 2.0. Results regarding diffuser performance, drag evaluation, engine evaluation, and burner performance are provided.

High-temperature tensile and thermal-shock investigations were conducted on beryllium oxide and beryllium oxide plus columbium metal additions. X-ray diffraction and metallographic results are given. The tensile strength of 6150 pounds per square inch for beryllium oxide at 1800 degrees F compared favorably with the zirconia bodies previously tested. Additions of 2, 5, 8, 10, 12, and 15 percent by weight of columbium metal failed to improve the shock resistance over that of pure beryllium oxide.

Memorandum presenting a determination of the thermal conductivity of 14 metals and alloys in temperatures ranges with a maximum of 1100 degrees Fahrenheit. Some of the metals included steels, high-temperature alloys, molybdenum disilicide, aluminum alloys, brass, and silver. A comparison method was used to obtain the results in which the thermal conductivity of the test sample was compared with the conductivity of high-purity lead.

From Introduction: "The investigation reported herein was therefore undertaken to extend this study to altitude conditions in which the low fuel-flow rates occur over the full range of engine speeds."

Report describing a study regarding the solubility and related properties of tributyl phosphate (TBP), which has lower solubility in water than most uranium solvents. Pure TBP and TBP in an inert diluent were tested for solubility in water, several nitric acid solutions of varying concentrations, and other solutions typical of process streams. For TBP-diluent-water system tests, equilibrium water content in organic phase was found.

Report documenting the suitability of Virginia for plant locations to produce synthetic liquid fuels, based on raw materials, water sources, and local interest.

"Investigations have been made in flight and in wind tunnels to determine which components of turbojet installations are most critical in icing conditions, and to evaluate several methods of icing protection. From these studies, the requirements necessary for adequate icing protection and the consequent penalties on engine performance can be estimated. Because investigations have indicated that the compressor-inlet screen constitutes the greatest icing hazard and is difficult to protect, complete removal or retraction of the screen upon encountering an icing condition is recommended" (p. 1).

Report presenting a preliminary analytical evaluation of the air and fuel specific-impulse characteristics of magnesium and magnesium-octene-1 slurries. Adiabatic combustion flame temperature, air specific impulse, and fuel-weight specific impulse are given for each fuel.

Technical report covering classified work of the Critical Experiments Program in the Physics Division for the period December 20, 1950 to March 20, 1951. Report outlines investigations of properties of critical assemblies composed of uranium and various reflectors and moderators, preliminary measurements of the effective energy for fission in the assembly. [From Introduction and Summary]

Abstract: The Salt Wash member of the Jurassic Morrison formation of Mexican Cry Mesa, Lukachukai District, Arizona, was examined to determine size, grade, and distribution of contained carnotite deposits and the possibilities of developing reserves by exploratory drilling. Only three occurrences of carnotite-bearing sandstone were found in 17 miles of rim outcrop. Limited drilling is recommended in the vicinity of these exposures.

"Equations and charts are presented for computing the thrust, the power output, the fuel consumption, and other performance parameters of a turbine-propeller engine for any given set of operating conditions and component efficiencies. Included are the effects of the pressure losses in the inlet duct and the combustion chamber, the variation of the physical properties of the gas as it passes through the system, and the change in mass flow of the gas by the addition of fuel" (p. 117).

Surge characteristics of the XJ34-WE-32 turbojet engine were determined over a range of altitudes. Several typical oscillograph traces during which surge occurred are presented. The effect of altitude on the surge line and it's relation to the steady-state operating region are shown.