Resource Type
Serial/Series Title
NACA Research Memorandums
148
Atomic Energy Commission Reports
34
Hanford Works Reports
14
University of California Radiation Laboratory Reports
11
HW (Series)
10
Oak Ridge National Laboratory Reports
10
NACA Technical Reports
8
BMI (Series)
7
Battelle Memorial Institute Reports
7
ORNL (Series)
6
31 More
Country
234 Matching Results
Results open in a new window/tab.
Results:
1 - 24 of
234
next
Status Report and Plant Proposals for Zirconium Purification
From abstract: "This report contains a summary of the latest improvements in zirconium purification as developed by the Y-12 research, pilot plant, production, and engineering groups, all of whom have been generously cooperating in this project."
Date:
November 18, 1955
Creator:
Leaders, W. M.
Object Type:
Report
System:
The UNT Digital Library
Report of the Forty-Fourth National Conference on Weights and Measures, 1959
Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.
Date:
December 18, 1959
Creator:
United States. National Bureau of Standards.
Object Type:
Report
System:
The UNT Digital Library
Preliminary Studies of Scavenging Systems Related to Radioactive Fallout : Tenth Letter Report, October 1 to December 1, 1959
Introduction: "This is the tenth letter report on ARF Project C 127, entitled "Preliminary Studies of Scavenging Systems Related to Radioactive Fallout." This report covers the period from October 1 to December 1, 1959."
Date:
December 18, 1959
Creator:
Stockham, John D. & Rosinski, John
Object Type:
Report
System:
The UNT Digital Library
Investigation of Methods for End Capping Stainless Steel Pins
This report follows investigations of methods for sealing the ends of stainless steel-uranium oxide fuel pins with the objective to develop an end-capping method that would give consistently good-quality closures in production.
Date:
May 18, 1956
Creator:
Vagi, Julius J.; Thompson, Harold B. & Martin, David C.
Object Type:
Report
System:
The UNT Digital Library
MoSiâ‚‚-UOâ‚‚ Ceramics for High-Temperature Fuel Elements
This report follows a study that was aimed at the collection of experimental data needed to estimate the maximum safe temperatures and dispersed UO2 contents for MoSi2--UO2 fuel elements exposed to air.
Date:
August 18, 1955
Creator:
Gambino, John R.; Quirk, John F. & Duckworth, Winston Howard
Object Type:
Report
System:
The UNT Digital Library
NACA Conference on High-Speed Aerodynamics: A Compilation of Papers Presented
A reproduction of the technical papers presented by staff members of the NACA Laboratories at the NACA Conference on High-Speed Aerodynamics at the Ames Aeronautical Laboratory during March 18-20, 1958. The primary purpose of the conference was to convey to military services and contractors the results of recent research and to provide an opportunity to discuss the results.
Date:
1958-03-18/1958-03-20
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
Wind-Tunnel Investigation of a 1/60-Scale Model of the Republic MX-1554 Airplane at a Mach Number of 2.85
Report presenting the results of an investigation to determine the static longitudinal and lateral stability and control characteristics of a model of the Republic MX-1554 airplane at a specified Mach and Reynolds number. No analysis was provided in the paper in order to expedite publication.
Date:
March 18, 1953
Creator:
Dickey, Robert R. & Spahr, J. Richard
Object Type:
Report
System:
The UNT Digital Library
The Corrosion of Miniature Fuel Plates in Simulated Reactor Cooling Water
Technical report issued as one of a series of reports concerned with corrosion studies for the Materials Resting Reactor, created to both determine the effect of various practices for fuel plate fabrication on corrosion resistance and to determine the extent of penetration of the fuel plates by localized corrosion attack. [From Introduction]
Date:
December 18, 1950
Creator:
English, James L.
Object Type:
Report
System:
The UNT Digital Library
The Method of Moments in Quantum Mechanics ; The [Pi]-Mesic Disintegration of the Deuteron
The following report contains two reports to summarize a thesis: first, a report describing the classical moment techniques of Tchebycheff, Markov, and Stieltjes that have been applied to the problem of diagonalizing the Hamiltonian operator; and the second report describes an investigation of the higher-order corrections to the mesic disintegration of deuterons that is considered.
Date:
March 18, 1957
Creator:
Halpern, Francis R.
Object Type:
Thesis or Dissertation
System:
The UNT Digital Library
Magnetic Acceleration of a Plasma by a Rail Source
Abstract: "Two parallel wires close together with an arc between them form a hairpin-type of current configuration which should magnetically propel the plasma of the arc. By the time-of-flight measurements with probes it has been demonstrated that directed translational energies of 290 ev can be imparted to deuterons in a plasma produced by a high-current pulsed arc at the tips of two titanium wires loaded with deuterium. It is believed that three deuterons are actually magnetically propelled."
Date:
March 18, 1955
Creator:
Bostick, Winston H.
Object Type:
Report
System:
The UNT Digital Library
Some Preliminary Investigations in the Use of a Supersonic Mercury Vapor Jet for Providing an Energetic Neutral Beam
Report discussing experiments conducted under the Livermore "Waldo" project to determine "(1) surface densities attainable in a supersonic mercury vapor jet stream, (2) the approximate efficiency of a mercury jet for neutralizing a proton beam, and (3) the mercury partial pressure contribution in the bore due to side streaming from the mercury jet."
Date:
July 18, 1956
Creator:
Steinhaus, J. F.
Object Type:
Report
System:
The UNT Digital Library
The Quantitative Recovery of Plutonium From Laboratory Residues
Report discussing the procedures and experimental data of various plutonium waste recovery methods. The report elaborates on the different methods of collection necessary for different wastes.
Date:
March 18, 1953
Creator:
Ferguson, W. S.
Object Type:
Report
System:
The UNT Digital Library
Proposal for a High-Current Discharge Tube With Capacitor
Abstract: This proposal describes a parallel-plate capacitor and the discharge tube with which it is hoped that implosion energies of 1000 eV can be given to deuterons by the pinch effect. The discharge tube is to be arranged so that no external series switch is required.
Date:
March 18, 1955
Creator:
Bostick, Winston H.
Object Type:
Report
System:
The UNT Digital Library
An Immobilized Plasma in a Nonuniform Field : (IBM Machine Code Title "PLANOUNF1")
Abstract: "The self-consistent equations have been found for a plasma which lies in a mainly unidirectional magnetic field, which has a circular symmetry and which has a harmonic variation in the direction of the magnetic field. The equations have been solved in two cases, 1) where the harmonic variation of the field is finite and the plasma is weak, and 2) where the plasma is strong but the harmonic variation of the field is weak. The configurations thus found can form an important starting point for calculations of the stability of plasmas."
Date:
February 18, 1955
Creator:
Tonks, Lewi, 1897-1971
Object Type:
Report
System:
The UNT Digital Library
Results of Diamond Drilling Mesas 1, 2, 3, and 4, Lukachukai Mountains, Northeastern Arizona
From purpose and scope: Diamond drill exploration of the Lukachukai district was undertaken to find minable bodies of uranium ore and to determine whether sufficient reserves were present to warrant construction of a local mill. A minimum of 30,000 feet and a maximum of 50,000 feet of drilling were assigned to block out ore in the discovery area, Mesa I (pl. 1.). It was anticipated that some of the footage might be used to test Mesa II should the area become accessible. With access to Mesas II and IV subsequently provided by roads constructed by F. A. Sitton, Inc., and access to Mesa III furnished by a road constructed by the Atomic Energy Commission, the area available for drilling was eventually increased by some three and a half times. With no increase in allotted footage, the hole density was correspondingly decreased,
Date:
September 18, 1951
Creator:
Stafford, Howard S.
Object Type:
Report
System:
The UNT Digital Library
Process Development Studies for Lukachukai Ores
A resume of process development studies conducted with Lukachukai ores is presented. Data for the following phases of the work are reported in detail: 1. Roasting and leaching of uranium leach residues, and, 2. Uranium ion exchange. Other phases of the work are discussed and references cited.
Date:
April 18, 1955
Creator:
McLean, Daniel C.
Object Type:
Report
System:
The UNT Digital Library
An Evaluation of the Calder Hall Type of Nuclear Power Plant
Abstract: Presented herein is the preliminary design of a natural uranium, graphite moderated, CO2-cooled reactor and power plant similar to, but larger than, the British Calder Hall plant, with a net electrical output of 130 MWE.
Date:
January 18, 1957
Creator:
Banks, William F.; Schneider, G. A.; Morgan, William T. & Ash, E. B.
Object Type:
Report
System:
The UNT Digital Library
Reference Design for an OMR-Powered 38,000-DWT Tanker
Abstract: This report presents a reference design of an organic moderated and cooled reactor for the propulsion of a 38,000-dwt tanker.
Date:
March 18, 1957
Creator:
Gimera, R. J. & Stanbridge, R. E.
Object Type:
Report
System:
The UNT Digital Library
Investigation of Equilibrium Temperatures and Average Laminar Heat-Transfer Coefficients for the Front Half of Swept Circular Cylinders at a Mach Number of 6.9
Report presenting the average heat-transfer coefficients and equilibrium temperatures for the front half of an isothermal cylinder with a laminar boundary layer as determined by wind tunnel testing at Mach number 6.9 and a range of Reynolds numbers and sweep angles.
Date:
August 18, 1955
Creator:
Feller, William V.
Object Type:
Report
System:
The UNT Digital Library
Experimental investigation of a transonic compressor rotor with a 1.5-inch chord length and an aspect ratio of 3.0 2: blade-element performance
Report presenting a transonic compressor rotor with double-circular-arc blade sections, which were designed and tested to investigate the aerodynamic effects of using a short blade chord and a high aspect ratio. The report presents the blade-element performance and performance analysis.
Date:
August 18, 1955
Creator:
Schwenk, Francis C. & Tysl, Edward R.
Object Type:
Report
System:
The UNT Digital Library
A preliminary investigation of static-pressure changes associated with combustion of aluminum borohydride in a supersonic wind tunnel
Report presenting static-pressure changes resulting from steady combustion of aluminum borohydride in a supersonic wind tunnel. Static pressures were measured along the top wall of a tunnel adjacent to the flame that filled the upper portion of the test section. Results regarding the static-pressure increases, effect of change in fuel-injection rate, and effect of tunnel boundary layer on the character of the heat-addition region are provided.
Date:
August 18, 1955
Creator:
Dorsch, Robert G.; Serafini, John S. & Fletcher, Edward A.
Object Type:
Report
System:
The UNT Digital Library
Free-flight heat-transfer measurements on two 20 degree-cone-cylinders at Mach numbers from 1.3 to 4.9
Report presenting heat-transfer data obtained in free flight at supersonic Mach numbers up to 4.90 and local Reynolds numbers per foot up to 27.7 million. Two 20 degree-included-angle cone-cylinder models were launched from a carrier airplane at 36,000 feet of altitude. Results regarding primary data and heat-transfer results are provided.
Date:
July 18, 1955
Creator:
Rabb, Leonard & Simpkinson, Scott H.
Object Type:
Report
System:
The UNT Digital Library
Effect of inlet flow distortion on compressor stall and acceleration characteristics of a J65-B-3 turbojet engine
Report presenting an investigation to determine the effects of inlet flow distortion on the compressor stall and engine acceleration characteristics of a J65-B-3 turbojet engine. A sinusoidal circumferential distortion and two abrupt radial tip flow distortions were introduced at the engine inlet at several altitudes and Mach number 0.8. Results regarding the definition of inlet flow distortions, acceleration limits, compressor pressure ratio at stall, fuel flow for stall, and maximum acceleration rate are provided.
Date:
November 18, 1955
Creator:
Fenn, David B. & Sivo, Joseph N.
Object Type:
Report
System:
The UNT Digital Library
Preliminary Free-Jet Performance of XRJ43-MA-3 Flight-Weight Ram-Jet Engine at Mach Numbers of 2.35, 2.50, and 2.70
From Summary: "The performance of the XRJ43-MA-3 flight-weight ram-jet engine has been investigated in a free-jet facility as part of the development program for the "Bomarc," ram-jet powered, interceptor-type missile. The engine performance was obtained at Mach numbers of 2.35, 2.50, and 2.70, altitudes from 50,000 to 75,000 feet, and Miami hot day and cold day inlet temperatures at an angle of attack of +4 deg. At each flight condition investigated, the engine control set an inner-ring fuel flow which was held constant as outer-ring fuel flow was varied."
Date:
November 18, 1955
Creator:
McAulay, John E. & Prince, William R.
Object Type:
Report
System:
The UNT Digital Library