Report presenting lift and drag characteristics in the landing-approach configuration on 41 jet-propelled fighter-type airplane arrangements using flight testing. Minimum comfortable approach speeds were evaluated by four test pilots. Suggestions for achieving optimal speeds for approach under various conditions are also provided.

Report presenting testing of two blunt-nose models, a flat-face-cone and a hemisphere-cone, at Mach numbers up to 4.7. The main purpose was to determine information about heating rates and transition for different blunt nose shapes for long-range ballistic missiles. Information about pressure measurements and heat transfer is provided.

Memorandum presenting results of tests for possible flutter of a dynamically and elastically scaled model of a proposed all-movable horizontal tail surface for the North American X-15 airplane. Tests at Mach number 6.86 were made on the scaled model and on several other configurations with lower stiffnesses.

"Results of tests for possible flutter of a dynamically and elastically scaled model of a proposed all-movable horizontal tail surface for the North American X-15 airplane are presented herein. Tests at a Mach number of 6.86 were made on the scaled model and on several other configurations having lower stiffness. Flexibility influence coefficients and calculated modes and frequencies for the weakest configuration are presented" (p. 1).

Memorandum presenting an investigation to determine the performance of the XJ79-GE-1 turbojet engine and its components, while operating as integral parts of the engine, conducted in an altitude test chamber. Data were obtained over a range of Reynolds number indices and for various settings of the variable compressor stators and variable-area exhaust nozzle from fully open to fully closed positions. Results regarding the component performance and engine performance are provided.

Report presenting testing of four multiweb wing models were tested at Mach number 2 in a free jet to investigate structural effects of aerodynamic heating and loading. All of the models were the same except for the number of chordwise internal stiffening ribs; each had zero, one, two, or three. Results regarding laboratory vibration tests, jet tests, model behavior, temperatures, stresses, and discussion of failure are provided.

Report issued by the Oak Ridge National Laboratory displaying a single chart showing measurements of the gamma-ray, fast-neutron, and thermal-neutron dose rates.

The method of detecting unpaired electrons in liquid and solid systems by electron spin resonance is discussed. The significance of the hyperfine structure in electron spin resonance is discussed and the possible use of these structural features of the electron spin resonance spectrum to elucidate the nature of the photoproduced unpaired electrons in photosynthesizing systems is introduced.

The HAPO Critical Incident Alarm, Model I, is an instrument designed to give an audible and visual alarm signal in the event of a critical incident to which it is exposed. There will be thirty-one (31) of these instruments installed and several spares located in the various manufacturing buildings in the Chemical Processing Department where there exists any possibility of a critical incident occurring. The instrument is intended as a post or after-the-fact warning device. It will offer no protection prior or leading up to, nor prevent, a critical incident. They are intended to be operated from the 115 V. A.C., 60 C.P.S. emergency line power. The instrument is self-contained, including the radiation detector, and will be calibrated to alarm at 500 mr/hour in a gamma field.

Nearly all nuclear reactors being designed and built today- whether for research, power, or productions of fissionable materials- use recirculating fluids for cooling. However, a number of production reactors are still operating with single-pass cooling by treated natural water. The Hanford Atomic Products Operation of the General Electric Company presently operates production reactors for the AEC at Richland, Washington. The first reactors were built during World War II, and utilized a standard water treatment which was designed to provide large quantities of settled, filtered Columbia River water for once-through cooling.

Calculations are given for eighteen stainless steel clad helium bonded specimens of UO2-ThO2 containing normal U to be placed in 6 holes in a holder in a position of the ORR not to exceed a peak unperturbed flux of 4 x 10^14 n.cm^2/sec and irradiated to a peak nvt of 1.96 x 10^21 neutrons/cm^2

The following document is a note describing the building process of an improved nuclear density gauge in comparison to previous gauges, within the interval of June 1 to July 1, 1959.

Zirflex cladding waste is to be neutralized to pH 10 before transfer to waste storage tanks. This treatment causes the precipitation of zirconium oxide or hydroxide, which may lead to flow difficulties during transfer. The purpose of this investigation was to determine the physical properties and flow characteristics of the neutralized slurry to assist in the selectin of satisfactory transfer equipment and storage conditions.

"A conceptual design study of reactors for the join production of tritium and colbat-60 has been made. The study covered a family of four reactors raging in thermal power from 16.5 MW to 150 MW, and designed for corresponding annual productions ranging from 0.5 to 5.0 million curies of tritium respectively."--P. v.

This report presents a detailed study of HRT Run 14, which was abruptly terminated by the formation of a hole in the Zircaloy-2 core tank. In this run the reactor was operated at high temperature and pressure for ten days from March 25 to April 4, 1958. Nuclear power operation extended from March 29 until April 4, when fuel solution leaked into the heavy-water blanket. The maximum power level attained was 6.4 Mw.

The rate of uranium sorption by a strong-base anion-exchange resin (Dovex 21K) from a uranyl sulfate solution (U 0.005 M, H2SO4 0.02M, SO4 0.2 M) was studied using a stirred vessel technique and measuring the U235 gamma radiation on each bead. Resin initially in the chloride form and the sulfate for was studied.

Report documenting the ongoing research and developments of the Oak Ridge National Laboratory's Homogeneous Reactor Project.

Uranium extractions from carbonate solutions were effective and phase separation rates were rapid using a new commercial quaternary extractant, Alamine 336. Extraction coefficients were approximately proportional to the quaternary concentration. Addition of -0.5 mole tridecanol/mole quaternary to the solvent gave optimum extraction efficiency and phase separation rates.

This report discusses the concept of an improved mass gauging technique with a scintillation counter as the radiation detector in order to meet industrial requirements.

The purpose of the test was to fill the condensate storage tank and the Condensate System and obtain satisfactory preliminary operation. The components of the Condensate System performed adequately and satisfactorily with the exception of fill control valve (M9-VI). This valve (M9-VI) is not used in the current operation procedure.

The purpose of the test was to evaluate the operation of the Nuclear Instrumentation Power Range Amplifier during start up. While the station was operating at a gross load of 16.5 megawatts, a variation of 0, 8.5, 2.7 and 4.4 existed between the compensated ion chamber currents (CIC) and the test currents for channels A, B, C and D respectively. The off site modifications to channel C power range amplifier did not cause the ion chamber current and test current to be the same at 16.5 megawatts gross power. The modifications to channel C were made to correct for this deficiency.

Studies are being made on the effects of variation of aluminum content, heat treatment, surface preparation, and other metallurgical factors on the room temperature ductility of Al-- Fe alloys. It is estimated that approximately 65 percent of the proposed research has been completed over the first eight and one-half months of the contract period.