Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

This quarterly progress report discusses ongoing research and experiments at Oak Ridge National Laboratory in the Metallurgy Division. This report discusses thorium research, the mechanical properties of metals including thorium, uranium, inconel, and z-nickel, the ANP program (including the following topics: the physical chemistry of liquid metals, and welding research), and the materials testing reactor program.

The first part of this quarterly progress report details reactor theory and design, discussing the aircraft reactor experiment, experimental reactor engineering, reactor physics, and critical experiments. The second part of this report is not included. The third part of this quarterly progress report details materials research, discussing corrosion research, physical properties and heat-transfer research, metallurgy and ceramics, chemistry of high-temperature liquids, and radiation damage. The fourth part of this quarterly progress report details alternate systems, discussing a supercritical water reactor, circulating-moderator-coolant reactors. The fifth part of this quarterly progress report includes appendixes.

From introduction: A rapid appraisal of the carnotite resources of the Salt Wash sandstone member of the Morrison formation in the Carrizo Mountains area was undertaken by the U. S. Geological Survey late in 1951 in connection with its current project of geologic mapping of the area. Though brief and preliminary, this report provides a summary of production trends and estimated reserves in the area and indicates as far as possible the total potential of the area as a source of uranium. This information may be helpful in planning new milling facilities or other measures to encourage a higher rate of production.

Technical report presenting the results of a study of the AEC thorium production facilities at Iowa State College, Ames, Iowa. Operating procedures, descriptions of equipment and a production cost analysis have been included in this study.

"his interim report presents the grade and tonnage data collected during exploration at the Lost Creek schroeckingerite deposit, Sweetwater County, Wyoming, Between July 1951 and February 1952. Discussions of he geologic results of exploration (lithology, mineralogy, structure, origin, etc.) are not included in this report and consequently the detailed lithology and structure have been omitted from the illustrations (figs. 1-7)"

This report discusses what effects the shift of an orbital axis relative to the center of the table-top stellarator tube as well as the magnitude of these effects.

The following report describe the effect of plasma oscillations using a table-top model and the probable magnitude of the quantities needed to reach complete ionization.

From abstract: "The methods of applying results of bulk-shielding measurements to the design of reactor shields is outlined. Geometrical transformations for the more common shapes are derived, as are approximate means of calculating leakage of radiation. As an illustration of the methods, the ORNL Lid Tanks and Bulk Shielding Facility data are transformed to a standard geometry and compared. Two direct calculations of water attenuation, using cross sections described in the previous article, are finally compared with the experimental data."

This quarterly progress report details the ongoing research and experiments at the Oak Ridge National Laboratory as part of the Aircraft Nuclear Propulsion Project. The first part of this report discusses reactor theory and design. The second part of this report is not included. The third part of this report discusses materials research. The fourth part of this report includes appendixes

Summary: Purpose of the investigation is to improve the peripheral welding of the brazed joint at the top of aluminum-sheathed fuel slugs by forming the can over the top of the cap and welding the resulting center opening. This investigation looked at the applicability of the inert-gas-shielded, consumable electrode process, using commercially available equipment, for producing a weld closure in spun-over fuel cans. Using commercially available sigma welding equipment, no practical combination of welding conditions was found which resulted in satisfactory leak-tight closures in spun-over canned fuel slugs. It is recommended that plug welding of spun-over closures by the sigma welding process be dismissed from consideration for start-up at the Savannah River Plant.

Report describing a property of randomness of an arithmetical function.

A report regarding carnotite resources of Outlaw Mesa, Mesa County, Colorado.

Preliminary report regarding diamond-drill exploration on Outlaw Mesa, Mesa County, Colorado. Done on behalf of the Division of Raw Materials of the U.S. Atomic Energy Commission