Purification of Argon, Helium and Xenon : a Bibliography (open access)

Purification of Argon, Helium and Xenon : a Bibliography

This bibliography contains 145 references on the technology and apparatus used in the purification of argon, helium and xenon, and on the analysis for water, carbon monoxide, hydrogen, nitrogen, and oxygen, in the purification process. The references are arranged in four classifications: general, argon, helium, and xenon. Within each classification, the references are arranged in chronological order.
Date: September 16, 1956
Creator: Cernak, Elizabeth A.
System: The UNT Digital Library
Filling Instructions for the Pratt & Whitney Forced Convection Liquid Metal Inpile Loop Experiment (PW19) (open access)

Filling Instructions for the Pratt & Whitney Forced Convection Liquid Metal Inpile Loop Experiment (PW19)

The apparatus and procedures that are to be used to fill the liquid metal system of the Pratt and Whitney Forced Convection Liquid Metal Inpile Loop are described. The liquid metal to be used is a mixture containing 56% Na and 44% K, which is a liquid at room temperature. In order to simplify the filling procedure at the reactor site, two containers, each of which contains exactly enough liquid metal to fill the experiment to the prescribed level, a fill dolly incorporating a purified helium system, and an evacuation system will be provided at the reactor site. After completion of the liquid metal transfer, the liquid metal fill tube will be crimped, cut, and seal welded. The liquid metal and helium systems will then be pressurized through the helium fill tubes, which will also be crimped, cut, and seal welded. Each tube seal weld will be inspected after completion of the weld by mass spectrometry leak check and dye penetrant fault detection
Date: April 29, 1959
Creator: Heyl, P. T.
System: The UNT Digital Library
Braze Ring Mold for Sintering & Casting (open access)

Braze Ring Mold for Sintering & Casting

Technical report of an investigation to determine a suitable material for sintering and casting of braze rings. Braze rings afford an excellent means of preplacing braze alloy on tube to head joints of radiators, heat exchangers, and similar applications. A cast ring is especially desirable because of its increased strength. Previous efforts at casting had used welding grade carbon blocks with the desired ring cavities machined into their surface. Conclusion: Stackpole grade 331 electro-graphite provided the best results of the materials investigation. It is hard and more readily machinable with conventional tools than other grades. Carbon, in general, proved to be more satisfactory especially due its ease and speed of fabrication.
Date: May 14, 1959
Creator: Rogers, S. L.
System: The UNT Digital Library
Weldability of Hayes Alloy #25 (open access)

Weldability of Hayes Alloy #25

Technical report describing the process to determine the fusion welding characteristics of Haynes Alloy #25 as applied to TLJ-100530, Corrosion Loops. Hayes Stellite Alloy #25 is a cobalt-base alloy for corrosion resistant high temperature applications. This material, when welded by the inert gas shielded tungsten arc method, produces sound ductile joints. Material thicknesses greater than 12 gauge require standard joint preparations, a V joint being preferred up to 1/4 inch and a U joint for greater thicknesses. Welding heat should be kept to a minimum followed by fast cooling. The molten metal is very fluid and may present difficulties when position welding.
Date: May 19, 1959
Creator: Rogers, S. L.
System: The UNT Digital Library
Survey: Oxidation Characteristics of Columbium and Columbium Base Alloys (open access)

Survey: Oxidation Characteristics of Columbium and Columbium Base Alloys

Unclassified experimental data concerned with the oxidation characteristics of Nb and Nb-base alloys are presented. The bulk of the results is presented in tabular form and cataloged under laboratory name sub-headings. The theory of alloy development for oxidation resistance is discussed. Methods of evaluating oxidation behavior are outlined.
Date: May 20, 1959
Creator: Clough, W. R. (William Raymond); Hirakis, E. C. & Krutenat, R. C.
System: The UNT Digital Library
Braze Alloys v.s. Atmospheres : Final Report Project 1325 (open access)

Braze Alloys v.s. Atmospheres : Final Report Project 1325

Summary. At the time this project was initiated, all brazing had been confined to small retorts of ten cubic feet capacity or less. Larger assemblies were scheduled which required retorts of over 100 cubic feet capacity. Hydrogen atmospheres had given the best results, however, there was considerable reluctance to use hydrogen in these large retorts from a safety standpoint. It was thought that thru the use of PMC 2252, an argon - 2 1/2% hydrogen gas atmosphere which in non-explosive, sufficient cleaning action might be attoined without the inherent hazards encountered with hydrogen. An investigation of the argon - 2 1/2% hydrogen gas as a brazing atomosphoer
Date: May 21, 1959
Creator: Rogers, S. L.
System: The UNT Digital Library
Bonding of Tantalum (open access)

Bonding of Tantalum

Technical report describing the investigation undertaken to determine the necessary requirements for obtaining sound bonded joints on tantalum. Corrosion and Mass Transfer Loops LTTN 237A and 427 called for fabrication of 430 stainless steel clad tantalum tubing. Since there was little or no experience at welding this material at CANEL, specimens were welded using vacuum chambers and plastic chambers as normally used for loop fabrication. Resistance welding was performed without the use of a special atmosphere producing sound bonds.
Date: June 17, 1959
Creator: Rogers, S. L.
System: The UNT Digital Library
Diffusion of Xenon in Columbium (open access)

Diffusion of Xenon in Columbium

The diffusion coefficient was calculated for the diffusion of Xe through Nb and found to be 0.064 exp (-18,600/RT).
Date: November 20, 1959
Creator: Gregory, D. P. (Derek P.) & Leavenworth, H. W. (Howard W.)
System: The UNT Digital Library
Producibility of an Alloy of Columbium with One Percent Zirconium (open access)

Producibility of an Alloy of Columbium with One Percent Zirconium

Abstract. Proven mineral resources show that niobium is the most abundant of the refractory metals and extraction capacity is adequate to meet foreseeable requirements. Approximately four tons of Nb-1% Zr alloy were melted, forged, drawn, and rolled to produce various mill forms and relatively large die impression forgings. It was demonstrated that the Nb-1% Zr alloy is readily amenable to melting, primary working, and secondary working using standard equipment available in the specialty steel and nickel alloy industries. In general, the hot malleability of the alloy is significantly better than that of the more refractory nickel base high temperature alloys and is comparable to the stainless steels. Methods were successfully developed to protect the alloy against contamination during hot working. Cold fabricability proved to be outstanding. Reductions up to 90% were achieved during cold rolling of sheet with no intermediate stress relief or annealing treatment. Tube drawing reductions up to 50% were normal with no intermediate annealing. Over-all, the cold workability of this alloy was superior to that of the stainless steels. There was no problem of embrittlement over the full range of working temperatures which were used during the course of this work, namely from room temperature to 2350 …
Date: December 9, 1959
Creator: Raring, L M
System: The UNT Digital Library
Self-Shielding Cross Sections : a Bibliography (open access)

Self-Shielding Cross Sections : a Bibliography

This bibliography contains 37 references on self-shielding cross sections. The bibliography is limited to the period from 1951 through November 1959 with the references arranged alphabetically by title. The sources used in compiling this bibliography were: Abstracts of Classified Reports Nuclear Science Abstracts
Date: December 29, 1959
Creator: Cernak, Elizabeth A.
System: The UNT Digital Library