Purpose: Automatic recording equipment was designed for use with a high temperature Sykes experiment in which calorimetric measurements were to be made to temperatures approaching 2000* C. At such high temperatures, radiation becomes the dominant mechanism for heat transfer. The temperature differences which are used to determine the magnitude of this transfer no longer are directly proportional to it, but must be related by the Stefan-Boltzman law of radiation.

Abstract: The design and testing of experimental equipment for remotely joining stainless steel tubing by heliarc welding is described. This apparatus consists of a modified heliarc welding torch which is hydraulically controlled to maintain constant arc voltage. A suitable arc voltage sensing and control amplifier circuit was developed for this application.

Abstract: A calculational method is presented which may be used to determine fast and thermal neutron flux distributions at deep neutron penetrations in hydrogenous shields.

Abstract: This report outlines the general techniques developed for replacement of PRE in-cell equipment or equipment components.

Abstract: A magnetic-jack control-safety rod is under development for the 45.5 thermal megawatt Organic Moderated Reactor. The rod is "unitized," i.e., the poison element, drive, position indicator, and shock absorber are contained in a compact assembly which is inserted in a regular fuel channel opening in the core. Tests to develop components capable of operating under these conditions are described and results are reported.

Abstract: This report presents a description of the Organic Moderated Reactor Experiment (OMRE), of the hazards associated with this experiment, and all of the safeguards taken to ensure the safety of the operating personnel and the population of the surrounding area.

Abstract: Testing of the Natural Circulation Steam Generator has been conducted with the Sodium Reactor Experiment. A necessary modification of the original feed-water control system was utilized.

Abstract: In the present study, the variation of moderator composition was postulated to be effected by the inclusion of varying amounts of beryllium oxide in the graphite of an SGR.

Abstract: This report describes the features of several systems which were rejected as inadequate, and the evaluation of a design leading to the construction of a prototype cask and its associated equipment.

Abstract: An alluminum-clad low-enrichment, uranium-alloy fuel element of flat plate configuration has been proposed for the Organic Moderated Reactor (OMR).

Introduction: This document describes the results of a six-week conceptual design study of an organic moderated and cooled reactor (OMCR) power plant adapted to a Class T-7 tanker.

The design of a waste-gas treatment system for organic moderated reactors requires a knowledge of reactor waste-gas composition, generation rate, and radioactivity. To obtain data on these variables a continuous stream analyzer was constructed to analyze the waste gas from the Organic Moderated Reactor Experiment (OMRE).

Introduction: A low-capacity, low-decontamination plant can be built, as part of a power reactor complex, to avoid long distance transfer of fuel to a high-capacity aqueous processing plant. Activation of such a complex, with the processing plant adjacent to the reactor it serves, could decrease the cost of the integrated fuel cycle. The study of this concept is a major objective of the Processing Refabrication Experiment (PRE).

Introduction: The description of the Organic Moderated Reactor Experiment, (OMRE), its location, its safety system, and operative procedures have been previously detailed. The present report, although dealing with the subject of OMRE safety, has the more detailed intent of (1) determining the behavior of the OMRE under extremely unlikely sets of conditions; and (2) providing additional design information in the areas of reactivity coefficients, burnout heat flux, and reactor control.

Abstract: The preliminary design is described for a small electric-power-generating plant powered by an organic moderated reactor. System and component requirements are discussed and possible design configurations and equipment are described.

Abstract: During the course of power run 14 on the Sodium Reactor Experiment (SRE) at low power, the temperature difference among various fuel channels was found to be undesirably high. Normal operating practices did not succeed in reducing this temperature difference to acceptable values and on July 26, 1959, the run was terminated.

From abstract: The vapor pressure determination of solid ThF4 has been completed. Experiments to determine the heat of formation of ThF4 by studying the reaction of ThF4 with SiO2 are described.

From abstract: The response of the reactor to forced oscillations has been investigated with the pile oscillator technique and the data are presently being analyzed.

Report describing technical progress on the design and construction of an Organic Moderated Reactor Experiment (OMRE), to be operated at the National Reactor Testing Station in Arco, Idaho. "This is the first report of the series and coves the period from the initiation of the project to July 31, 1956. Also included as an appendix to the report is a detailed description of the OMRE facility" (p. 3).

From abstract: Impact tests on the Mark III Hanford safety element indicate that the design is mechanically adequate and does not constitute a personnel hazard.

None

"An experiment to determine the effect of reactor irradiation on the thermal conductivity of uranium-impregnated graphite at elevated temperatures as described. The results show a decrease in the thermal conductivity saturating at [approximately] 60 percent at a temperature of 700 degrees C; at [approximately] 50 percent at a temperature of 1000 degrees C; and at [approximately] 25 percent at a temperature of 1300 degrees C. It was found that after irradiation at a given temperature, exposure at a higher temperature resulted in an increase in the thermal conductivity. The converse was also observed. Within the precision of measurement there was no difference in effed between temperature changes produced by varying the fission rate in the samples and changes produced by varying the power in an external heater."

"Engineering was continued on the development of sodium cooled, graphite moderated type reactors. General studies were carried out as well as studies specifically devoted to the following: a. full scale poser-only plant, b. thirty-mega watt pilot plant, the SGR, c. sodium reactor experiment, the SRE. This work consisted of theoretical analysis of various aspects of nuclear performance; economic investigations of different fuel element, cooling system and plant arrangements; and experimental investigations related to the properties of certain materials and to the development of components. Preliminary consideration was given to alternative reactor arrangements employing liquid hydrocarbon moderators and high temperature coolants other than sodium. In addition to a summary of the general design features of the SRD, a program was prepared outlining the proposed use of this installation.

None