4,120 Matching Results

Results open in a new window/tab.

Ditching Investigation of a 1/10-Scale Model of the Grumman F9F-2 Airplane, TED No. NACA DE 335 (open access)

Ditching Investigation of a 1/10-Scale Model of the Grumman F9F-2 Airplane, TED No. NACA DE 335

An investigation was made of a 1/10-scale dynamically similar model of the Grumman FgF-2 airplane to study its behavior when ditched. The model was landed in calm water at the Langley Tank No. 2 monorail. Various landing attitudes, speeds, and configurations were investigated. The behavior of the model was determined from visual observations, acceleration records, and motion-picture records of the ditchings. Data are presented in tabular form, sequence photographs, time-history acceleration curves, and plots of attitude and speed against distance after contact.
Date: 1950
Creator: Fisher, Lloyd J. & McBride, Ellis E.
System: The UNT Digital Library
Ditching Investigation of a 1/14-Scale Model of the Northrop C-125 Airplane (open access)

Ditching Investigation of a 1/14-Scale Model of the Northrop C-125 Airplane

"An investigation of a 1/14-scale dynamically similar model of the Northrop C-125 airplane was made to determine the ditching characteristics and proper ditching technique for the airplane. Various conditions of damage, landing attitude, flap setting, and speed were investigated. The behavior of the model was determined from visual observations, motion-picture records, and time-history deceleration records" (p. 1).
Date: 1950
Creator: Fisher, Lloyd J. & Windham, John O.
System: The UNT Digital Library
Ditching Investigation of a 1/15-Scale Model of the Convair-Liner Airplane (open access)

Ditching Investigation of a 1/15-Scale Model of the Convair-Liner Airplane

A ditching investigation of a model of the Convair-Liner airplane was made to observe the behavior and determine the safest procedure for making an emergency water landing. The ditching model was designed and constructed by the National Advisory Committee for Aeronautics. Design information on the airplane was furnished by the Consolidated Vultee Aircraft Corporation. A three-view drawing of the airplane is shown. The investigation was made in calm water at the Langley tank no. 2 monorail.
Date: 1950
Creator: Fisher, Lloyd J. & Thompson, William C.
System: The UNT Digital Library
Gust-Tunnel Investigation to Determine the Load at the Joint of a Coupled Airplane Configuration Encountering a Gust (open access)

Gust-Tunnel Investigation to Determine the Load at the Joint of a Coupled Airplane Configuration Encountering a Gust

"An investigation has been made in the Langley gust tunnel with two identical airplane models approximating 1/40-scale models of the B-29, coupled in tandem with a boom so that the individual centers of gravity were equidistant from the single coupling joint at the tail of the lead airplane. Time histories of the boom joint load were obtained as the models were flown through a gust. The results indicate that on a similar configuration involving airplanes the size of B-29 airplanes a load on the boom joint of 10,000 to 14,000 pounds could be induced by encountering a gust of 50 feet per second and having a gradient distance of 17 chords, at a forward speed of 380 feet per second and that the total load is extremely sensitive to the steadiness of flight that can be maintained with or without a gust" (p. 1).
Date: January 1950
Creator: Cahen, George L.
System: The UNT Digital Library
An Investigation of the Longitudinal Characteristics of the MX-656 Configuration Using Rocket-Propelled Models Preliminary Results at Mach Numbers from 0.65 to 1.25 (open access)

An Investigation of the Longitudinal Characteristics of the MX-656 Configuration Using Rocket-Propelled Models Preliminary Results at Mach Numbers from 0.65 to 1.25

"A rocket-propelled model of the MX-656 configuration has been flown through the Mach number range from 0.65 to 1.25. An analysis of the response of the model to rapid deflections of the horizontal tail gave information on the lift, drag, longitudinal stability and control, and longitudinal-trim change. The lift-coefficient range covered by the test was from -0.2 to 0,3 throughout most of the Mach number range" (p. 1).
Date: 1950
Creator: Mitchell, Jesse L. & Peck, Robert F.
System: The UNT Digital Library
Performance of J33-A-27 Turbojet-Engine Compressor, II, Over - All Performance Characteristics of Modified Compressor at Equivalent Impeller Speeds from 6100 to 13,250 RPM (open access)

Performance of J33-A-27 Turbojet-Engine Compressor, II, Over - All Performance Characteristics of Modified Compressor at Equivalent Impeller Speeds from 6100 to 13,250 RPM

"A modified J33-A-27 compressor was operated over a range of equivalent impeller speeds from 6100 to 13,250 rpm in order to obtain the over-all compressor performance. At the equivalent design speed of 11,800 rpm, the maximum efficiency of 0.764 and peak pressure ratio of 4.56 occurred at an equivalent weight flow of 104.07 pounds per second. At the highest equivalent speed (13,250 rpm) a maximum efficiency of 0.711, a maximum equivalent weight flow of 123.00 pounds per second, and a peak pressure ratio of 5.76 were obtained" (p. 1).
Date: 1950
Creator: Beede, William L. & Ginsburg, Ambrose
System: The UNT Digital Library
Preliminary Results Obtained from Flight Test of a Rocket Model Having the Tail Only of the Grumman XF10F Airplane Configuration, TED No. NACA DE 354 (open access)

Preliminary Results Obtained from Flight Test of a Rocket Model Having the Tail Only of the Grumman XF10F Airplane Configuration, TED No. NACA DE 354

"A flight test was made to determine the servoplane effectiveness and stability characteristics of the free-floating horizontal stabilizer to be used on the XF10F airplane. The results of this test indicate that servoplane effectiveness is practically constant through the speed range up to a Mach number of 1.15, and the stabilizer static stability is satisfactory. A loss of damping occurs over a narrow Mach number range near M = 1.0, resulting in dynamic instability of the stabilizer in this narrow range" (p. 1).
Date: 1950?
Creator: Gardner, William N. & Edmondson, James L.
System: The UNT Digital Library
Tests of a Hermes A-2 Missile Body at Mach Number 4.04 (open access)

Tests of a Hermes A-2 Missile Body at Mach Number 4.04

Force tests on a proposed body shape of the Hermes A-2 missile with and without longitudinal spoilers were made at Mach number 4.04. Values of normal force coefficient, pitching-moment coefficient, and center-of-pressure position were obtained.
Date: 1950
Creator: Ulmann, Edward F. & Lord, Douglas R.
System: The UNT Digital Library
Transonic Stability and Control Investigation of a 1/80-Scale Model of the Consolidated Vultee Skate 9 Seaplane, TED No. NACA DE 345: Transonic-Bump Method (open access)

Transonic Stability and Control Investigation of a 1/80-Scale Model of the Consolidated Vultee Skate 9 Seaplane, TED No. NACA DE 345: Transonic-Bump Method

"An investigation of the longitudinal stability and of the all-movable horizontal tail and aileron control of a 1/80-scale reflection-plane model of the Consolidated Vultee Skate 9 seaplane has been made through a Mach number range of 0.6 to 1.16 on the transonic bump of the Langley high-speed 7- by 10-foot tunnel. At moderate lift coefficients (0.4 to 0.8) and below a Mach number of 1.0 the model was statically unstable longitudinally. The static longitudinal stability of the model at low lift coefficients increased with Mach number corresponding to a shift in aerodynamic center from 37 percent mean aerodynamic chord at a Mach number of 0.60 to 64 percent at a Mach number of 1.10" (p. 1).
Date: 1950
Creator: Riebe, John M. & MacLeod, Richard G.
System: The UNT Digital Library
Wind-Tunnel Investigation of a Full-Scale Model of the Hughes MX-904 Missile (open access)

Wind-Tunnel Investigation of a Full-Scale Model of the Hughes MX-904 Missile

"A wind-tunnel investigation has been conducted to determine the stability and control characteristics of a full-size model of the Hughes MX-904 missile. Aerodynamic characteristics of the complete model through moderate ranges of angles of attack and yaw, with an additional test made through an angle of attack of 180 degrees, are presented. The effects of horizontal tail deflection are also included" (p. 1).
Date: 1950?
Creator: Wiley, Harleth G.
System: The UNT Digital Library
Tests of the Northrop XSSM-A-3 Missile in the Ames 40- by 80-Foot Wind Tunnel: Wing Modifications (open access)

Tests of the Northrop XSSM-A-3 Missile in the Ames 40- by 80-Foot Wind Tunnel: Wing Modifications

"Wind-tunnel tests were conducted to determine the longitudinal stability characteristics of a full-scale Northrop XSSM-A-3 missile. Various wing modifications were investigated in an effort to provide a configuration that would maintain longitudinal stability to lift coefficients necessary for landing the missile during flight tests. The results of the tests led to the choice of a wing with an increased leading-edge radius" (p. 1).
Date: January 5, 1950
Creator: Graham, David
System: The UNT Digital Library
Measurements of Aerodynamic Characteristics of a 35 Degree Sweptback NACA 65-009 Airfoil Model With 1/4-Chord Bevelled-Trailing-Edge Flap and Trim Tab by the NACA Wing-Flow Method (open access)

Measurements of Aerodynamic Characteristics of a 35 Degree Sweptback NACA 65-009 Airfoil Model With 1/4-Chord Bevelled-Trailing-Edge Flap and Trim Tab by the NACA Wing-Flow Method

The third investigation in a series to determine the fundamental characteristics of trailing-edge controls at transonic speeds. This particular report uses a 35 degree sweptback untapered airfoil model with an aspect ratio of 3 and a flap with a bevelled trailing edge with a trailing-edge angle of 23 degrees. Results regarding lift, pitching-moment, and hinge-moment characteristics are provided.
Date: January 6, 1950
Creator: Johnson, Harold I. & Brown, B. Porter
System: The UNT Digital Library
Aeronautical study of a wing-fuselage combination employing a wing swept back 63 degrees: Characteristics at supersonic speeds of a model with the wing twisted and cambered for uniform load (open access)

Aeronautical study of a wing-fuselage combination employing a wing swept back 63 degrees: Characteristics at supersonic speeds of a model with the wing twisted and cambered for uniform load

Report presenting the lift, drag, and pitching-moment characteristics of a wing-fuselage combination employing a wing with the leading edge swept back 63 degrees and cambered and twisted for a uniform load at a lift coefficient of 0.25 and Mach number 1.53. The experimental results are compared to those from other investigations. A maximum lift-drag ratio of 8.9 and a minimum drag coefficient of 0.0145 was obtained.
Date: January 9, 1950
Creator: Hall, Charles F. & Heitmeyer, John C.
System: The UNT Digital Library
Exploratory Investigation of the Effect of Skewed Plain Nose Flaps on the Low-Speed Characteristics of a Large-Scale Triangular-Wing-Fuselage Model (open access)

Exploratory Investigation of the Effect of Skewed Plain Nose Flaps on the Low-Speed Characteristics of a Large-Scale Triangular-Wing-Fuselage Model

Memorandum presenting an investigation of the effect of skewed plain nose flaps on a thin, low-aspect-ratio triangular wing in combination with a high fineness-ratio fuselage conducted at low speeds and high Reynolds numbers. The plan form of the flaps was such that the flap chord varied from zero percent of the wing chord at the model center line to 100 percent at about 91-percent wing semispan. The results indicated that the nose flaps provided a significant delay in the occurrence of both the leading-edge type of separation and tip stalling.
Date: January 12, 1950
Creator: Wick, Bradford H. & Graham, David
System: The UNT Digital Library
Results Obtained During Flights 1 to 6 of the Northrop X-4 Airplane (A.F. No. 46-677) (open access)

Results Obtained During Flights 1 to 6 of the Northrop X-4 Airplane (A.F. No. 46-677)

Report presenting testing using a Northrop X-4 to obtain stability and control data during airplane acceptance tests. The data includes a time history of a complete pull-up, time histories of several level and accelerated flight runs, and the effect of dive-brake extension on the longitudinal and lateral trim.
Date: January 12, 1950
Creator: Matthews, James T., Jr.
System: The UNT Digital Library
Results of the Flight Test of a Dummy of the MX-656 Rocket-Propelled Models (open access)

Results of the Flight Test of a Dummy of the MX-656 Rocket-Propelled Models

The data obtained from the flight of a simplified (dummy) rocket-propelled model of the MX-656 have been analyzed to determine the booster-model characteristics and the model-alone characteristics up to a Mach number of 1.3. The data indicate that the model-booster combination is satisfactory. The model alone is longitudinally stable i n the Mach number range covered by the test (0.9 to 1.3) with the center of gravity at -15 percent of the mean aerodynamic chord. With the stabilizer setting at 0 deg. the variation of normal-force coefficient with Mach number is not large. The total-drag-coefficient variation with Mach number is not unusual. About 12 percent of the total drag at a Mach number of 1.3 can be attributed to body base drag.
Date: January 12, 1950
Creator: Mitchell, Jesse L. & Peck, Robert F.
System: The UNT Digital Library
Low-Speed Investigation of the Aerodynamic Loads on the Droop-Nose Flap of a Wing With Leading Edge Swept Back 47.5 Degrees and Having Symmetrical Circular-Arc Airfoil Sections at a Reynolds Number of 4.3 X 10 (Exp 6) (open access)

Low-Speed Investigation of the Aerodynamic Loads on the Droop-Nose Flap of a Wing With Leading Edge Swept Back 47.5 Degrees and Having Symmetrical Circular-Arc Airfoil Sections at a Reynolds Number of 4.3 X 10 (Exp 6)

Report presenting an investigation of the pressure distribution on the full-span droop-nose flap of a wing with the leading edge swept back 47.5 degrees and symmetrical circular-arc airfoil sections. Flap pressure distributions were obtained for the base configuration and various deflections of the full-span droop-nose flap and other flap deflection combinations. Information regarding the flow and section characteristics, spanwise loading parameters, center-of-pressure variation, and flap normal-force and hinge-moment coefficients is provided.
Date: January 16, 1950
Creator: Whittle, Edward F., Jr. & Fink, Marvin P.
System: The UNT Digital Library
Measurements of the Drag and Pressure Distribution on a Body of Revolution Throughout Transition From Subsonic to Supersonic Speeds (open access)

Measurements of the Drag and Pressure Distribution on a Body of Revolution Throughout Transition From Subsonic to Supersonic Speeds

Memorandum presenting an investigation of the drag and pressure distribution on a body of revolution of fineness ratio 12 as measured by the free-fall method. Analysis of the results has provided knowledge of the mechanism of the abrupt drag rise which occurs near the speed of sound, and demonstrates that the theoretical method described in a previous report satisfactorily predicts the shape of the measured pressure distributions at low supersonic speeds.
Date: January 16, 1950
Creator: Thompson, Jim Rogers
System: The UNT Digital Library
The effect of tip tanks on the rolling characteristics at high subsonic Mach numbers of a wing having an aspect ratio of 3 with quarter-chord line swept back 35 degrees (open access)

The effect of tip tanks on the rolling characteristics at high subsonic Mach numbers of a wing having an aspect ratio of 3 with quarter-chord line swept back 35 degrees

Report presenting an investigation of the effect of wing-tip mounted tanks on the rolling characteristics of a wing, aspect ratio 3 with the quarter-chord line swept back 35 degrees, through a range of Mach numbers and angles of attack using the free-roll method.
Date: January 17, 1950
Creator: Kuhn, Richard E. & Myers, Boyd C., II
System: The UNT Digital Library
Investigation of effect of span and spanwise location of plain and stepped spoiler ailerons on lateral control characteristics of a wing with leading edge swept back 51.3 degrees (open access)

Investigation of effect of span and spanwise location of plain and stepped spoiler ailerons on lateral control characteristics of a wing with leading edge swept back 51.3 degrees

Report presenting a wind-tunnel investigation at low speed to determine the lateral control characteristics of a 51.3 degree sweptback-wing model equipped with either plain or stepped spoiler ailerons with a fixed projection of 5-percent-wing chord and various spans and spanwise locations. The results indicated that spanwise rolling-effectiveness charts of flap-type ailerons can not be used to predict effectiveness of spoiler-type ailerons on swept wings. Results regarding the wing aerodynamic characteristics with spoiler ailerons retracted, wing aerodynamic characteristics with spoiler ailerons projected, and a comparison of spoiler-type and flap-type ailerons.
Date: January 18, 1950
Creator: Fischel, Jack & Hammond, Alexander D.
System: The UNT Digital Library
Experimental Investigation of Various External-Store Configurations on a Model of a Tailless Airplane With a Sweptback Wing (open access)

Experimental Investigation of Various External-Store Configurations on a Model of a Tailless Airplane With a Sweptback Wing

Report presenting an investigation of various external-store configurations on a model of a tailless airplane with a sweptback wing over a range of Mach numbers. The investigation was performed out of a desire to reduce the drag interference caused by external stores as much as possible. Results regarding the aerodynamic characteristics in pitch, lift-drag ratios, effect of Mach number, variation of control effectiveness, aerodynamic characteristics in yaw, and variation of stability parameters are provided.
Date: January 19, 1950
Creator: Silvers, H. Norman & Spreemann, Kenneth P.
System: The UNT Digital Library
Pressure Distributions on the Blade Sections of the NACA 10-(3)(066)-033 Propeller Under Operating Conditions (open access)

Pressure Distributions on the Blade Sections of the NACA 10-(3)(066)-033 Propeller Under Operating Conditions

The first report in a series of five that present unanalyzed pressure data obtained in tests of five full-scale propellers with NACA 16-series blade sections. Pressure distributions on the blade sections were measured under operating conditions to determine the aerodynamic characteristics of each blade section. This particular report presents information for eleven radial stations of the NACA 10-(3)(066)-033 propeller.
Date: January 24, 1950
Creator: Maynard, Julian D. & Murphy, Maurice P.
System: The UNT Digital Library
Investigation at Mach Number 1.62 of the Pressure Distribution Over a Rectangular Wing With Symmetrical Circular-Arc Section and 30-Percent-Chord Trailing-Edge Flap (open access)

Investigation at Mach Number 1.62 of the Pressure Distribution Over a Rectangular Wing With Symmetrical Circular-Arc Section and 30-Percent-Chord Trailing-Edge Flap

Report presenting an investigation of the pressure distribution over a rectangular wing with a 9-percent-thick symmetrical circular-arc section and a 30-percent-chord trailing-edge flap. Results are given for pressure distributions, Schileren and liquid-film studies, and wing section characteristics are provided.
Date: January 25, 1950
Creator: Czarnecki, K. R. & Mueller, James N.
System: The UNT Digital Library
Effects of boundary-layer control on the longitudinal characteristics of a 45 degrees swept-forward wing-fuselage combination (open access)

Effects of boundary-layer control on the longitudinal characteristics of a 45 degrees swept-forward wing-fuselage combination

Report presenting an investigation to determine the benefits obtainable by applying boundary-layer control to a 45 degree swept-forward wing-fuselage combination. Force and pressure-distribution data were obtained with and without boundary-layer control with various combinations of leading-edge and trailing-edge flaps.
Date: February 2, 1950
Creator: McCormack, Gerald M. & Cook, Woodrow L.
System: The UNT Digital Library