Memorandum presenting an investigation in the 20-foot free-spinning tunnel on a 1/25-scale model of the McDonnell F3H-2N airplane. The effects of control settings and movements on the erect and inverted spin and recovery characteristics of the model were determined for the clean condition. Results regarding erect spins, engine gyroscopic moments, inverted spins, spin-recovery parachute, and landing condition tests are provided.

Report presenting data to determine the component and overall engine performance up to an altitude limit for the J71-A-11 (600-B36) turbojet engine. Engine operation using JP-4 fuel at Mach number 0.8 was satisfactory up to an altitude of about 60,000 to 65,000 feet, and engine operation with marginal combustion stability was maintained to an altitude of about 80,000 feet. Results regarding the altitude operating limits, component performance, overall engine performance, contribution of individual component losses to overall engine performance losses, exhaust-nozzle-area requirements, and altitude performance at rated engine conditions are provided.

Memorandum presenting an investigation of the J71-A-11 (600-B36) turbojet engine conducted in an altitude wind tunnel, and more specifically the component and overall engine performance up to the altitude limit imposed by the use of MIL-F-5624A, grade JP-4, fuel. The data were then extended to higher altitudes by the use of gaseous-hydrogen fuel. Results regarding altitude operating limits, component performance, overall engine performance, contribution of individual component losses to overall engine performance losses, exhaust-nozzle-area requirements, and altitude performance at rated engine conditions are provided.

Memorandum presenting a theory for evaluating the mutual interference between a wing and tip tank as extended to apply to store-pylon configurations. By using the theory and the flow-field formulas of a previous report, theoretical store-pylon side-force estimates have been made for a number of store-pylon configurations. Results regarding the theory for store-pylon side force, scope of test configurations, contribution of store and pylon to combined load, effect of store spanwise location on the store-pylon side-force coefficient, effect of pylon sweep and store chordwise location, effect of sideslip on the store-pylon side-force coefficient, effect of fins on store side-force coefficient, and interference effects between inboard and outboard stores are provided.

Report presenting pressure distributions associated with stable combustion of aluminum borohydride in the supersonic stream adjacent to a short, 13-inch chord, and an extended, 25-inch chord, flat-plate model. High-speed direct and schileren motion pictures of the flame and associated shock waves were taken. Results regarding the description of the combustion and associated stream disturbances, static-pressure change at model reference surface caused by combustion, lift forces resulting from combustion, base pressure change caused by combustion, stream-parameter measurements during combustion, and surface temperature changes during combustion are provided.

"Several materials have been tested in the ceramic-heated jet (laboratory model) at a Mach number of 1.96 with a stagnation temperature of approximately 4,000 degrees Fahrenheit. Test models made of molybdenum were less affected by temperature than titanium, stainless steel, and an alloy of 90 percent tungsten, 6 percent nickel, and 4 percent copper. Titanium and steel burn with highly exothermic reactions when subjected to the 4,000 degrees Fahrenheit air jet" (p. 1).

Report presenting an investigation in the full-scale tunnel to determine the effects of boundary-layer control by blowing over trailing-edge flaps on the low-speed performance and static longitudinal stability characteristics of a 60 degree delta wing-body-tail combination with variable flap positioning and leading-edge devices. Results regarding the flap lift characteristics at zero angle of attack, tail-off characteristics, tail-on characteristics, and low-speed performance characteristics are provided.

Report discussing heat-transfer and pressure measurements obtained from flight testing of a model of the Titan intercontinental ballistic missile up to a specified Mach and Reynolds number. The heat-transfer coefficients were compared to theoretical results and a discrepancy was found during the accelerating portions of flight. Drag coefficients were obtained for a range of Mach numbers.

Report presenting heat-transfer and pressure measurements obtained from flight tests of a model of the Titan intercontinental ballistic missile. Turbulent flow was observed over the model throughout the flight with the exception of one station on the nose. Results regarding pressure measurements, heat transfer, and drag measurements are required.

Report discussing a study of the effects of puncturing the heat shield of an intercontinental-ballistic-missile warhead by small projectiles. Calculations were created for both rod and sphere projectiles and experimental testing was performed on a missile model with holes drilled in the heat shield. The possibility that a projectile could have enough energy to cause mechanical damage to the interior of the warhead is also presented.