Memorandum presenting the low-speed lateral control characteristics of a 32 degree sweptforward wing of aspect ratio 5.8 and NACA 65-series airfoil sections as determined in the 19-foot pressure tunnel. The investigation include the measurement of the hinge-moment and normal-force characteristics of an aileron and the rolling-effectiveness characteristics of the aileron and several configurations of spoilers.

In the determination of the performance of an air-cooled turbine, the cooling-air-flow characteristics between the root and the tip of the blades must be evaluated. The methods, which must be verified and the unknown functions evaluated, that are expected to permit the determination of pressure, temperature, and velocity through the blade cooling-air passages from specific investigation are presented.

From Introduction: "V-g records supplied the NACA by the Bureau of Aeronautics in 1948 and 1949 have provided additional material. These records are analyzed statistically in this report to the frequency of large values of acceleration and airspeed, and results are compared with the design requirements."

"Results are presented of an investigation to determine the pressure distributions on a wing with leading-edge sweepback decreasing from 45 degrees at the root to 20 degrees at the tip, an aspect ratio of 4.12, taper ratio of 0.36, and NACA 64A009 airfoil section. Tests were conducted at a Reynolds number of 3.5 x 10(exp 6) and a Mach number of 0.07 on the wing with and without 0.20 chord and 0.65 span split flaps deflected 60 degrees. These pressure distributions are analysed herein to determine the character of flow and its effect on the stability of the wing" (p. 1).

Report presenting ram-recovery and mass-flow ratios for submerged inlets at four positions on the fuselage of a model of a hypothetical fighter airplane. Results related to the inlet location and effect of angle of attack are also provided.

Report of an investigation into the effect of leading-edge radius on the high-speed aerodynamic characteristics of a symmetrical, 9-percent-thick airfoil using three different airfoils at several Mach and Reynolds numbers. Information about the normal-force coefficients, drag coefficients, moment coefficients about the quarter chord, pressure-distribution diagrams, Schileren photographs, and a comparison with data obtained in other tunnels is included.

An investigation was conducted in the NACA Lewis altitude wind tunnel to determine the effect of compressor-outlet bleedoff on the performance of an axial-flow turbojet engine equipped with a variable-area exhaust nozzle. Results presented indicate the effect of compressor-outlet bleedoff on performance at altitudes of 25,000 and 40,000 feet and a flight Mach number of 0.53. Variation of performance with bleedoff flow is indicated for operation with fixed- and variable-area exhaust nozzles. Temperature and pressure losses through the bleedoff ducting system are also discussed.

Report presenting a method for calculating the path of a jettisonable nose section at any speed by means of successive approximations using static aerodynamic characteristics. Conditions for consideration, including the effect of stabilizing fins, are included in the calculations.

From Summary: "Flight tests have been conducted on rocket-propelled models of an airplane configuration incorporating a sweptback wing with inverse taper to investigate the drag, stability, and control characteristics at transonic and supersonic speeds. The models were tested with a conventional tail arrangement in the Mach number range from 0.55 to 1.2. In addition to the various aerodynamic parameters obtained, the flying qualities were computed for a full-scale airplane with the center-of-gravity location at 18 percent of the mean aerodynamic chord. Also, included in this investigation are drag measurements made on relatively simple fixed-control models tested with both conventional and V-tail arrangements."

Report presenting an analysis of a number of free-flight transient responses resulting from small stabilizer movements obtained during testing of the Bell X-1 airplane to obtain its longitudinal stability characteristics. A comparison of flight data and model test data is also provided.

Report presenting an investigation of three air inlets designed for use at transonic speeds conducted in the 8-foot high-speed tunnel. The basis of the design of the inlets was the use of a nose which was shaped so that substream velocities are maintained on its surface for high-speed operating conditions. Results regarding impact pressure recovery, external pressure distributions, wake-survey drag, supersonic external pressure drag, and design considerations are provided.

Memorandum presenting the results of a theoretical investigation of the lateral response and stability characteristics of the X-3 research airplane (Douglas Model No. 499D). Included are time histories calculated by a computer showing the effect of various disturbances on the lateral response of the airplane with 0 degrees geometric dihedral and -5 degrees dihedral.

Report presenting boundary-layer measurements on rocket-powered free-flight models to determine average skin-friction coefficients. The test body, NACA RM-10, was a fin-stabilized parabolic body of revolution of fineness ratio 12.2 with a blunt base to provide space for a rocket jet. Results regarding the skin-friction and boundary-layer profiles and experimental and theoretical curves are provided.

Memorandum presenting a study of the relationship between the static and dynamic properties of heat-resistant alloys at high temperatures. An auxiliary objective is to provide a better basis for evaluating the results from the various types of fatigue machines.

Report presenting local coefficients of convective heat transfer as measured from skin temperature along the body of an RM-10 NACA research missile, which consisted of a parabolic body of revolution. Results regarding recovery factors, adiabatic wall temperatures, Nusselts, Prandtl, and Reynolds numbers, and boundary-layer transition are provided.

Report presenting testing of a 6.5-inch-diameter ramjet engine with a design Mach number of 2.13 and a short-flame-length combustor. Performance characteristics are provided for a range of Mach numbers and fuel-air ratios. Results regarding thrust, drag tests, static pressure, and combustion efficiencies are provided.

Report presenting the effects of a low-speed wind-tunnel investigation to determine the effects of vertical-fin location and area on the static and rotary lateral stability characteristics of semitailless airplane models. Results regarding straight flow, yawing flow, and rolling flow are provided.

Memorandum presenting tests in the 9-inch supersonic tunnel to investigate the factors that determine the magnitude of the wing-tail interference effects on the static longitudinal stability of supersonic missile configurations with low-aspect-ratio, tandem, cruciform lifting surfaces and to develop a missile configuration with a minimum variation in static margin due to wing-tail interference effects.

Memorandum presenting lift, drag, and pitching-moment data and some static rolling-moment data are presented for missile configurations having wing-tail-span ratios equal to and less than 1. The configurations include variations in wing and tail plan forms, wing-tail-span ratios, body length, and nose shape.

An analysis of the off-design performance of shock-in rotor-type supersonic blading is presented. The over-all losses are assumed divided into two groups;normal-shock losses, and external-wave losses. Throughout the range of relative entrance Mach numbers from 1.35 to starting, the largest losses can be attributed to the normal shock. An improvement in performance would be expected with a reduction of the normal-shock losses by the introduction of external compression waves.

Report presenting an investigation in the free-flight tunnel to determine the dynamic lateral stability and control characteristics of a high-aspect-ratio bomber model with self-supporting, free-floating fuel tanks attached to the wing tips. The results showed that the flight behavior of the configuration could be made satisfactory when sufficient restoring moment was supplied. Results regarding the flight behavior, rolling motions, motions of the bomber and attached tanks, and flight records for different gearing ratios are provided.

Report presenting an investigation by the wing-flow method to determine the snaking characteristics of a scale partial-model of a research airplane. Additionally, the snaking characteristics of 11 modified configurations of the research-airplane model were determined as well as a model that had a greater fineness ratio.

Report presenting results from a tank investigation of a powered dynamic model of the Grumman JRF-5 airplane fitted with a single hydro-ski and extended afterbody. Results indicated that the afterbody extension in place of a tail ski reduced the maximum resistance by 10 percent. Removal of the wing-tip skids gave a further reduction in maximum resistance of 3 percent.

Report presenting an investigation in Langley tank no. 2 to determine the hydrodynamic characteristics of the Consolidated Vultee Skate 7 seaplane with twin hydro-skis suitable for use on water or snow. Results regarding the take-off stability in smooth and rough water, landing stability, spray characteristics, and resistance are provided.