In the determination of the performance of an air-cooled turbine, the cooling-air-flow characteristics between the root and the tip of the blades must be evaluated. The methods, which must be verified and the unknown functions evaluated, that are expected to permit the determination of pressure, temperature, and velocity through the blade cooling-air passages from specific investigation are presented.

Report presenting five fuels of boiling temperatures and several hydrocarbon types in a jet-propulsion annular combustor to determine the effect of fuel boiling temperature and paraffinic and aromatic hydrocarbon types on combustion efficiency and altitude operational limit. At the severe inlet-air condition, the highest combustion efficiencies were obtained with the paraffinic and aromatic fuels with low boiling temperatures were found to vary from 30 to 58 percent.

"The importance of atomizing and mixing liquid oxygen and heptane was studied in a 200-pound-thrust rocket engine. Ten injector elements were used with both steel and transparent chambers. Characteristic velocity was measured over a range of mixture ratios. Combustion gas-flow and luminosity patterns within the chamber were obtained by photographic methods" (p. 1).

Memorandum presenting an investigation of the problems associated with the design of a low-pressure-loss, short afterburner for sea-level thrust augmentation in a static, sea-level test stand. Results regarding diffuser pressure losses, afterburner pressure losses, and afterburner performance are provided.

Report presenting an investigation of the problems associated with the design of a low-pressure-loss, short afterburner for sea-level thrust augmentation in a static, sea-level test stand using the power section of a 5970-pound-thrust, axial-flow turbojet engine. The various portions of the afterburner and procedures used to test it are described. Results regarding diffuser pressure losses, afterburner pressure losses, and afterburner performance are provided.

An experimental investigation was carried out to determine the boundary-layer transition characteristics of bodies of revolution with flat and nearly flat faces. Shadowgraphs indicated that the boundary layer remained laminar on the front faces and was turbulent only on the sides. The tests also yielded information on the total drag coefficients and static longitudinal stability of the models.

"An investigation was made at the Langley landing-loads track to obtain data on the coefficient of friction during wheel spin-up. A landing gear was tested at horizontal velocities ranging from 0 to 180 feet per second together with vertical velocities of 7.0 and 9.3 feet per second. The results indicate the effect of forward speed and tire inflation pressure on the coefficient of friction" (p. 1).