Abstract: A five-crystal scintillation gamma-ray spectrometer was constructed for use as a Compton coincidence spectrometer or as a pair coincidence spectrometer. Preliminary tests are discussed. The efficiency in either mode of operation was found to be low; however, the backgrounds were favorable and good definition of characteristic lines was achieved...Future tests and plans for improvements are discussed."

Abstract: "A description of the instrumentation for neutron flux measurement from Kiwi-A at NTS is given as some discussion of start-up considerations, detector design, system response adjustments, and power calibration of the reactor at some low level of power."

From abstract: "A general and systematic development of reactor computing methods and detailed application given in Report LAMS-2255 separately is supplemented in this report for a few specific systems of interest to the Rover program. Neutron cross sections, reactor description, and computed results are given for a reactor required to have a constant (radially) power distribution at high temperatures."

From abstract: "This report discusses a special handling procedure devised to prevent contamination of high-purity gold while processing the metal from cast billet to final sheet. Gold of 99.99% purity was cast into rectangular billets and rolled into sheet whose final dimensions were 48 by 12-1/2 by 0.015 inch...As a final step, the sheet was annealed dead-soft in preparation for subsequent forming operations."

This report describes a number of problems, generally involving the possibility of using reserved kinetic energy in such a way as to acquire, by suitable near collisions with one or the other of the celestial bodies discussed, much more kinetic energy that it possesses -- more by an order of magnitude than the available reserve energy would allow it to acquire by itself.

Abstract: In the study of a linear pinch, use of the equation of pressure balance has proven to be a powerful method of analyzing data taken with a magnetic probe. The toroidal pinch, however, is a geometrically more complicated object, and the use of the pressure balance equations is not so clean cut. It is the object of this note to analyze the pressure balance equations for a torus to the point where they might prove useful in interpreting probe data.

Delta-stabilized plutonium can be welded to itself or almost any other metal using the inert-gas metal-arc process. Equipment and procedures suitable for the welding of delta-stabilized plutonium under various conditions are described.

A sphere of LiD 2 feet in diameter was irradiated by 2 x 10<sup>15 14 Mev neutrons. Samples of Li<sup>7 metal were positioned at various radii for the irradiation. An analysis of these samples for tritium led to a determination of the number of tritons produced by 14 Mev neutrons acting on Li<sup>7 in a LiD system.

The use of quartz tubing for sampling molten plutonium and for casting rods is described. These procedures offer cheap and easy-to-use methods for obtaining molten samples and for casting long rods with small diameters.

A measurement of the [Lithium-7] reaction cross section by absolute counting of the tritium betas is described. The cross section was measured at several neutron energies between 4 Mev and 15 Mev. A comparison with results by emulsion techniques is given.

Critical conditions were obtained for a series of uranium-graphite fueled assemblies in the C/Oy range 150 to 500 with thick graphite reflectors and Be or D2O islands. Perturbations were studied in order to find the effect on reactivity of geometrical changes and engineering features. Information from these studies was used to develop a mock-up of an optimum reactor geometry for the first rocket reactor test device, Kiwi-A. Studies on a zero power mock-up (Zepo-A) helped establish its design details. A cold critical check was made of the Kiwi-A reactor.