The following report follows an investigation made to determine the composition of uranium-rich ternary eutectic alloys most suitable for reactor application in the as-cast condition. These determinations were made based metallographic examination and thermal analysis of as-cast alloys.

The creep strength and tensile properties-were determined in vacuum for beta-quenched, derby uranium. The stresses to produce a secondary creep rate of- 0.0001 per cent per hr at 100, 250, 400, and 500 deg C were 48,000, sile strengths were 114,500, 35,100, 11,100, and 8,500 psi at temperatares of 28, 300, 500, and 700 deg C, respectively. The creep and tensile strengths decrease quite rapidly with increasing temperature in the temperatare range 250 to 400 deg C.

Introduction: "The tensile properties, hot hardness, impact strength; and corrosion resistance of some arc-melted, iodide zirconium alloys have been determined. The alloys investigated include binary alloys of zirconium containing zero to five per cent tin, binary alloys of zirconium containing zero to 0.14 per cent nitrogen, and ternary alloys of zirconium containing tin and nitrogen, tin and uranium, and uranium and beryllium."

Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

Abstract: "The mechanical properties of a large number of zirconium alloys have been investigated. These alloys include zirconium-tin and zirconium-tin-uranium. Tensile tests have been run on these alloys at room temperature, 500 F, and 600 F. Hot-hardness data have been obtained from room temperature to 1600 F, with particular emphasis on the hot-rolling range. Creep tests and fatigue tests have been run on a number of zirconium-tin alloys at 500 F."

Abstract: "The mechanical properties and corrosion resistance of induction-melted, zirconium-tin alloys have been determined. The alloys investigated contained from zero to five per cent tin and up to 0.3% carbon. The zirconium used was United States Bureau of Mines sponge zirconium. The mechanical properties investigated include the tensile, hot-hardness, and impact properties."

This report has two parts to it discussing mineralogical examination of pitchblende concentrates and nitric acid digest residues. Part I gives the results of a cursory examination with the petrographic microscope of samples of pitchblende concentrates and residues to see if there is a relationship between the mineral composition of the samples and the filterability of the residue. Part II gives a revaluation of the data in Report BMI-241 on the mineral composition of two residues from the nitric acid digestion of pitchblende concentrates at the Rallinckrodt Chemical Works.

This report follows a study that was aimed at the collection of experimental data needed to estimate the maximum safe temperatures and dispersed UO2 contents for MoSi2--UO2 fuel elements exposed to air.

The following report presents neutron-flux measurements made with a concentric-cylinder element (Mark II) and includes axial, radial, and peripheral flux distributions.

The following report presents neutron-flux measurements with the Mark I element, which include neutron-flux distribution and flux depression within the element.

The following report summarizes the results of the laboratory-scale work and pilot-plant scale work of a salt-batch composition that reduces the hydrogen pickup by uranium rods during the beta heat treatment, and the study of the influence of humidity over the salt bath on hydrogen pickup.

From introduction: "This report covers the development of nondestructive techniques for measuring quantitatively: (1) thickness of electrodeposited-nickel diffusion barriers, and (2) thickness of aluminum cladding on flat-plate fuel elements."

This report covers a study of the deformation characteristics of uranium in grooved rolls. The study's purpose was to provide a basis for possible improvements in the uniformity of the rolled rod produced for the Hanford and Savannah River reactors.

Abstract: "A study of plastic flow during the extrusion of tubing was made by extruding colored Plasticine billets in a small-scale extrusion press. Decreasing the included angle of the conical die and tapering the ram end of the billet decreased the amount of coextrusion of the backer block into the tubing, lubricating the billet also decreased coextrusion."

This report follows the study of the properties of eutectic uranium-chromium alloy which is of interest in the Dow-Detroit Edison power reactor. The reactor is described in this report, as well as the casting of alloy, shrinkage measurements during solidification, density measurements, microstructures and macrostructures, mechanical properties, and specific heat data.

This report discusses tests on the preparation and cladding of hot-pressed and pressure-bonded titanium-boron. It explores the properties of titanium-boron as a control material in reactors.

This report explores the production of beta silicon carbide, a low-temperature, cubic modification of cubic silicon carbide. The temperature, heating time, type of starting material, and proportion of starting materials were all varied in order to test yields of beta silicon carbide.

This report discusses the production of large-diameter zirconium crystal bars in a 16 inch diameter, Hastelloy B, de Boer unit in order to increase production efficiency.

Report discussing the progress of research projects at Battelle Memorial Institute relating to civilian applications during August 1956.

This report of the Battelle Memorial Institute covers information on development regarding various materials.

This progress report of the Battelle Memorial Institute covers information in many categories for February, 1952. These include development of ceramic fuel elements, general ceramics, uranium and its alloys, thorium and its alloys, development of metallic fuel elements and assemblies, metals and alloys for reactor components, miscellaneous metallurgical work, liquid coolants and fuels, reactor engineering studies, and mechanism development.

This progress report of the Battelle Memorial Institute covers information in many categories. These include development of ceramic fuel elements, general ceramics, uranium and its alloys, thorium and its alloys, development of metallic fuel elements and assemblies, metals and alloys for reactor components, miscellaneous metallurgical work, liquid coolants and fuels, reactor engineering studies, and mechanism development.

Abstract: "Dissolution of carnotite in several readily liquefiable gases, including ammonia, sulfur dioxide, chlorine, and nitrogen dioxide, was found to be negligible, even in the presence of uranium complexing agents. No low-boiling liquids have been found which will dissolve carnotite directly. Treatment with various sulfur chloride will convert carnotite to a form soluble in water or in certain organic solvents. Also, carnotite can be readily dissolved in HCl-acidified ethanol, methanol, or acetone. Amenability tests on nine western ores with HCl-methanol solvent indicated that uranium extractions greater than 90 per cent could be obtained if sufficient acid was used to insure some free acidity in the pregnant liquor. Temple Mountain and Sinbad-Muddy River ores were exceptions to this, uranium extractions being only about 50-60 per cent. Vanadium extractions were invariably lower than uranium extractions. Chemical analyses are presented for nine western ores."

This report describes progress in testing nonaqueous methods for extracting uranium and vanadium from Western ores. Acetone leaches were found to be effective.