Wind tunnel construction and design is discussed especially in relation to subsonic and supersonic speeds. Reynolds Numbers and the theory of compressible flows are also taken into consideration in designing new tunnels.

A discussion of the Flettner rotor is presented from a nautical and economic viewpoint, and although it was a failure, the experimental and theoretical inventions cannot be disregarded. The following critical and experimental investigation will show the relations and applicability of the theories and practical applications. The Magnus effect is described in detail and a discussion and critical review of the Magnus effect is included.

The nature of turbulent flow through pipes and around obstacles is analyzed and illustrated by photographs of turbulence on screens and straighteners. It is shown that the reversal of flow and of the resistance law on spheres is not explainable by Prandtl's turbulence in the boundary layer. The investigation of the analogous phenomena on the cylinder yields a reversal of the total field of flow.

The tapered wing shape increases the lift in the middle of the wing and thus reduces the bending moment of the lifting forces in the plane of symmetry. Since this portion of the wing is the thickest, the stresses of the wing material are reduced and desirable space is provided for stowing the loads in the wing. This statically excellent form of construction, however, has aerodynamic disadvantages which must be carefully weighed, if failures are to be avoided. This treatise is devoted to the consideration of these problems.

The stability analysis of an airplane while rolling is much more simplified to the extent that it can be obtained for numerical data which can be put to practical use in the design of landing gear dimensions. Every landing gear type attains to a critical ground friction coefficient that decides the beginning of instability, i.e., nosing over. This study has, in addition, a certain interest for the use of wheel brakes.

This investigation has a double object: 1) the calculation of the general characteristics of certain wings with progressively varying sections; 2) the determination of data furnishing, in certain cases, some information on the actual distribution of the external forces acting on a wing. We shall try to show certain advantages belonging to the few wing types of variable section which we shall study and that, even if the general aerodynamic coefficients of these wings are not often clearly superior to those of certain wings of uniform section, the wings of variable section nevertheless have certain advantages over those of uniform section in the distribution of the attainable stresses.

The present report deals with six-component measurements in the small tunnel of the DVL on a model of the BFW-M 27b(sub 1), which were made to determine the effect of rolling and yawing on the air forces and moments. The wind was given a spiral motion by means of a rotating screen, the model being suspended in the conventional manner. The lack of accuracy in the measurement of the rolling-yawing moments was very noticeable.

In the present paper, the complete buckling conditions of stiffened plates are being developed for uniform compression. We shall treat plates with one or two longitudinal or transverse stiffeners at any point, discuss the buckling conditions, and evaluate them for different cases.

This report presents a method for computing the flight performance of an autogiro at high speed, the velocity component along the blades being accounted for by calculation of the profile drag and the equation for zero torque.

The purpose of this report is to show that only part of the system of rotating blades really is in the "windmill decelerating attitude" when the profile drag is sufficiently low. This particular part receives more torque from the air loads than can be absorbed by the profile drag. As a result thereof the rotating autogiro blade, when its torque is zero, is in part a propeller which functions in the "annular vortex attitude.".

Progressive application of the Kutta-Joukowsky theorem to the relationship between airfoil lift and circulation affords a number of formulas concerning the conduct of vortex systems. The application of this line of reasoning to several problems of airfoil theory yields an insight into many hitherto little observed relations. This report is confined to plane flow, hence all vortex filaments are straight and mutually parallel (perpendicular to the plane of flow).

In what follows an estimate will be made of the magnitude of the ground effect. For the two cases where the distance a of the propeller from the ground is very small, and very large, respectively, in comparison with the propeller radius r(sub o) the relations may be simply expressed. We consider first the effect of the ground, assuming that the thrust is held constant, as may be done by a suitable change in the propeller speed.

"In order to find an airfoil for a predetermined pressure distribution, the problem must be posed so that the pressure distribution creates no drag. Another fundamental difficulty is that it is impossible to specify a pressure distribution without first knowing the place where these pressures are to be applied, i.e., the wing-section shape. This difficulty may be avoided by directing the pressure distribution along the contour of the wing section. Then it becomes possible to define the change in wing-section shape which effects a certain modification of the wing-section shape" (p. 1).

This report will present ideas closely related to the vortex conception and illustrate them in the simplest possible terms. In addition to these general considerations, this report will attempt to show the application of the vortex theory in connection with the wing theory.

This paper restricts itself to radial impellers with cylindrical blades since, as Prasil has shown, the flow about an arbitrarily curved surface of revolution may be reduced to this normal form we have chosen by a relatively simple conformal transformation. This method starts from the simple hypotheses of the older centrifugal impeller theory by first assuming an impeller with an infinite number of blades. How the flow is then modified is then investigated.

Drag and loss of lift of a wing are attributable to the same cause, wake formation, thus indicating that there is some relation between both. The analysis of measurements on Joukowsky sections revealed a typical course of curves for the interdependence between drag and loss of lift. The shape of the curves apparently depends quite regularly on the mean camber and on the thickness of the profile.

Based upon Kirchoff's theory of free jets the flow through different screen arrangements of flat plates, as chiefly encountered with turbines in the cavitation zone is defined. It is shown by experiments that these theoretical results are very well representative in most cases of the conditions of discharge from water in air and consequently by cavitation. In addition, the experiments reveal a picture of the discrepancies between the actual flow and the theory of discharge of air in air (of water in water without cavitation).

"The optimum circulation distribution and hence the maximum theoretical thrust obtainable for contra-vanes fitted behind propellers is markedly dependent on the number of guide vanes. The outer portion of the vanes, even if projecting considerably beyond the edge of the propeller slipstream, still contribute appreciably to this theoretical gain of thrust. But, owing to the always existing friction of the vanes, the limit of the optimum vane length lies at relatively small diameters" (p. 1).

"The stability of an airplane can be easily determined by wind-tunnel tests, especially by simple tests with models mounted wind-vane fashion. However, each stability curve plotted by this method is valid only for a certain setting of the corresponding control surface, i.e., it characterizes the stability of the airplane with the control stick in a given position. The problems thus defined are studied from the point of view of longitudinal and transverse stability. Directional stability is not included in this study" (p. 1).

"The rudder effect of a sport airplane at high angles of attack was to be improved. This made it necessary to make a cut-out in the center of the continuous elevator so as to enlarge the rudder downward. This cut-out which reduced the rudder area by 12.5 percent changed the static stability of the airplane as well as the elevator effect" (p. 1).

"On various low-wing monoplanes the horizontal tail surfaces flutter in flight at large angles of attack and occasionally in curvilinear flight. This flutter leads to torsional vibrations of the rear end of the fuselage, as manifested by vibrations of the control stick. According to the earlier DVL investigations tail flutter is due to the influence, on horizontal tail surfaces, of eddies or vortices shed at large angles of attack by the upper surface of the wing root. The cause of tail flutter on a low-wing monoplane and the means of preventing it are investigated in the present report" (p. 1).

The accuracy of the instruments used for flight test measurements has been inadequate so a new series of tests were commissioned with the development of an accurate elevator setting recorder.

The suggestion for the measurements collected in this report was prompted by the results of spinning experiments. For the theoretical spinning investigations there was a lack of data on lateral force, yawing, and rolling moment of airplanes.

This report is a recounting of the German investigation of the crash of a commercial Junkers F 13 ge in England. The English report is examined and compared with the German interpretation of the accident.