Note presenting tests using a multicylinder engine to determine the effect that atmospheric humidity has on some phases of engine performance. Three test series with different types of fuel were carried out. The results indicate that failure to allow for the effect of differences in atmospheric humidity may introduce errors as great as would be occasioned by failure to allow for changes in barometric pressure.

This report presents the results of tests on two-stroke-cycle Diesel engines to determine the efficiency of the crank case scavenging pump. It was determined that efficiencies were between 95 and 100%.

The most essential phenomena of aircraft should be classified according to their origin and then measured. Information can thus be obtained in a quicker, cheaper, and more reliable way than otherwise would be possible.

This report presents methods by which it is possible to determine, in a simple manner, both pressure atomization and carburetor atomization.

Memorandum presenting the mutual action of wing and fuselage, which greatly affects the construction of airplanes. A description of systematic wind-tunnel tests that were made to answer that question is provided. Other tests deal with the transition from fuselage to wing root, which, if inadequate on low-wing monoplanes, may become dangerous by causing the air flow to separate at the wing root.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Circular describing the Potez 33, which is a military airplane that can be used for other purposes such as training pilots and as a messenger airplane due to its maneuverability and low landing speeds. A description of the controls, components, potential uses, characteristics, performance, drawings, and photographs are provided.

Measurements were made in the variable density wind tunnel to determine the pressure distribution over one section of a R.A.F. 31 airfoil with a leading edge slot fully open. To provide data for the study of scale effect on this type of airfoil, the tests were conducted with air densities of approximately one and twenty atmospheres.

Note presenting a systematic study of the strength of duralumin and chrome-molybdenum steel round tubing in combined transverse and axial loading. A description of the formulas that are the groundwork for the study as well as the results of the tests are provided.

"This report presents the results of an analytical investigation on the practicability of using mechanically operated discharge valves in conjunction with a manually operated intake control for improving the performance of N. A. C. A. Roots type superchargers. These valves, which may be either of the oscillating or rotating type, are placed in the discharge opening of the supercharger and are so shaped and synchronized with the supercharger impellers that they do not open until the air has been compressed to the delivery pressure. The intake control limits the quantity of air compressed to engine requirements by permitting the excess air to escape from the compression chamber before compression begins" (p. 479).

"This report describes an investigation made in order to determine the effect of tip speed on the characteristics of a thin-bladed metal propeller. The propeller was mounted on a VE-7 airplane with a 180-HP E-2 engine, and tested in the 20-foot propeller research tunnel of the National Advisory Committee for Aeronautics. It was found that the effect of tip speed on the propulsive efficiency was negligible within the range of the tests, which was from 600 to 1,000 feet per second (about 0.5 to 0.9 the velocity of sound in air)" (p. 465).

"The investigation described in this report was made primarily to afford a comparison between propeller tests in the new propeller research tunnel and flight tests and small model tests on propellers. Three wood propellers which had been previously tested in flight on a VE-7 airplane, and of which models had also been tested in a wind tunnel, were tested again on a VE-7 airplane in the propeller research tunnel. The results of these tests are in fair agreement with those of the flight and model tests" (p. 445).

From Summary: "The trials reported in this report were instigated by the Bureau of Aeronautics of the Navy Department for the purpose of determining accurately the speed and resistance of the U. S. S. "Los Angeles" with and without water recovery apparatus, and to clear up the apparent discrepancies between the speed attained in service and in the original trials in Germany. The trials proved very conclusively that the water recovery apparatus increases the resistance about 20 per cent, which is serious, and shows the importance of developing a type of recovery having less resistance. Between the American and the German speed trials without water recovery there remains an unexplained discrepancy of nearly 6 per cent in speed at a given rate of engine revolutions."

"The choice of the profile for the wings of an airplane is a problem which should be solved by a scientific method based on data obtained by systematic experimentation. The problem, in its present form, may be stated as follows: "To find a profile which has certain required aerodynamic characteristics and which encloses the spars, whose number, dimensions and separating distance are likewise determined by structural considerations." At present, the static test, corresponding to the case of accelerated flight at limited speed, requires the knowledge of the moment of the aerodynamic resultant at the angle of zero lift, and the possibility of controlling the magnitude of the corresponding absolute coefficient within more or less extensive limits" (p. 1).

This report gives a general method for drawing airplane profiles. This method is useful, but it leads to a somewhat laborious drawing which becomes quite complicated when we take a transformation function having terms of a high degree.

The thorough investigation of a Dorner four-cylinder, four-stroke-cycle Diesel engine with mechanical injection led me to investigate more thoroughly the operation of the Diesel as a vehicle engine. Aside from the obvious need of reliability of functioning, a high rotative speed, light weight and economy in heat consumption per horsepower are also indispensable requirements.

Directly developed from the single engined type F VII ten passenger monoplanes, the Fokker Trimotor closely follows the commercial aircraft that preceded it. It has three Wright Whirlwind air-cooled engines, rated at 200 HP each. Details of the wings, cockpit and cabin, baggage and freight compartments, controls, landing gear, characteristics, drawings, and photographs are provided.

The M.-S. 121 is noted for it's excellent visibility inherent in the parasol design. The wings have no dihedral but a very pronounced sweep back. A description of the components, flight characteristics, performance, drawings, and photographs are provided.

"Biplane cellules using the N.A.C.A.-M6 airfoil section have been tested in the variable density wind tunnel of the National Advisory Committee for Aeronautics. Three cellules, differing only in the amount of stagger, were tested at two air densities, corresponding to pressures of one atmosphere and of twenty atmospheres. The range of angle of attack was from -2 degrees to +48 degrees. The effect of stagger on the lift and drag, and on the shielding effect of the upper wing by the lower at high angles of attack was determined" (p. 1).

A brief description is given of different groups of high chromium steels (rustless iron and stainless steels) according to their composition and more generally accepted names. The welding procedure for a given group will be much the same regardless of the slight variations in chemical composition which may exist within a certain group. Information is given for the tensile properties (yield point and ultimate strength) of metal sheets and welds before and after annealing on coupons one and one-half inches wide.

Brief summary of the geographic distribution, habits, history, and subgenera of Synaptomys.

"Attention is called in this report to previous investigations of gaseous explosive reactions carried out under constant volume conditions, where the effect of inert gases on the thermodynamic equilibrium was determined. The advantage of constant pressure methods over those of constant volume as applied to studies of the gaseous explosive reaction is pointed out and the possibility of realizing for this purpose a constant pressure bomb mentioned" (p. 479).

"This investigation was conducted as a part of a general research on fuel-injection engines for aircraft. The purpose of the investigation was to determine the effects of fuel and cylinder gas densities with several characteristics of fuel sprays for oil engines. The start, growth, and cut-off of single fuel sprays produced by automatic injection valves were recorded on photographic film by means of special high-speed motion-picture apparatus" (p. 491).

This report presents a description of the design of the Cuatro Vientes wind tunnel.