Report presenting an exploration of the costs of operation for commercial airlines operating in Europe at the time of the report.

Equations are presented with which to determine spar cross-sections.

Differential and integral curves are presented and well as numerous calculations relating to hulls. Some of the calculations include those relating to hulls, those relating to the invariability of the shape of the hulls, and those relating to the suspension of the hull.

Hitherto, definite specifications have always been made for fuel oils and they have been classified as more or less good or non-utilizable. The present aim, however, is to build Diesel engines capable of using even the poorest liquid fuels and especially the waste products of the oil industry, without special chemical or physical preparation.

This report examines the stipulation contained in the 1918 BLV, that a girder subjected to longitudinal compression under the influence of half of the specified breaking load, along with Euler bending safety with an initial deflection of 1/200 of the length of the girder can, at most, be subjected to half the stipulated breaking strength.

This report details the contest to design and build concrete airship hangers. The difficulty lies in the magnitude of the absolute dimensions. An airship shed must withstand two principal types of stresses: those resulting from its own weight and those due to the wind. This report discusses both problems in detail.

This report deals mainly with the methods of construction employed when after the plan had been approved. The foundation, side walls, doors and roof are all discussed and the economic savings resulting from this method of construction.

This report presents the results of experiments on aerodynamic fuselages in which an air current is forced into the nose of the fuselage by the action of several fans revolving with the propeller. The air is then guided by special deflectors which cause it to flow along the exhaust pipes and cylinders and then, after having been utilized, pass out through annular ports. This system of cooling worked perfectly at all speeds.

"The forces acting on the blades of a propeller proceed from the mass of the propeller and the resistance of the surrounding medium. The magnitude, direction and point of application of the resultant to the propeller blade is of prime importance for the strength calculation. Since it was obviously impracticable to bring any kind of testing device near the revolving propeller, not so much on account of the element of danger as on account of the resulting considerable disturbance of the air flow, the deflection in both cases was photographically recorded and subsequently measured at leisure" (p. 1).

A historical sketch of duralumin is presented, especially in regards to its manufacture by various countries. The properties of duralumin are discussed and strength characteristics listed. Increasing the hardness of duralumin by tempering is discussed as well as the uses of the metal.

This report presents the results of a series of experiments, which gave some quantitative results on the effect of periodic changes in the direction of the relative air flow against airfoils. The first series of experiments concerned how the angle of attack of the wing model was changed by causing the latter to oscillate about an axis parallel to the span and at right angles to the air flow. The second series embraced all the experiments in which the direction of the air flow itself was periodically changed.

The test equipment for studying the vaporization of heavy and medium oils is described as well as some of the experimental properties explored such as vaporization speed and diffusion coefficient. The experimental arrangement is also discussed.

The present report deals with a series of tests made for the purpose of improving flow conditions about wings by applying the suction principle (increase of the lift coefficient and reduction of the drag about very thick wing sections). Though not conclusive, the report contains interesting results.

Memorandum presenting an investigation of whether rotating cylinders can be advantageously used in combination with airfoils in airplane construction.

Various methods for preventing fires in airplanes are presented with most efforts centering around prevention of backfires, new engine and carburetor designs, as well as investigations on different types of fuels.

This part of the report presents a detailed examination of spark prevention, fire extinguishers, and fuel tank location and design. A continued program of investigations and research is also proposed.

The endeavor to draw a strict line between gliders and soarers as been recently abandoned and the following classification adopted: 1) gliders controlled by shifting the weight of the body; 2) gliders controlled by rudders; 3) gliders controlled by wings. The different classes are discussed as well as materials and parts used in construction.

In this report Handley Page construction techniques are shown such as: solid-drawn tubular duralumin spars are used in the stabilizer; plain channel sections are used extensively for minor components; and the manner of assembling them into a stabilizer compression strut is shown.

Evidences were found that neither gasification nor vaporization of the injected fuel occurs before ignition; also that the hydrogen coefficient has no significance. However the knowledge of the ignition point and of the "time lag" is important. After ignition, the combustion proceeds in a series of reactions, the last of which at least are now known.

The question of whether the fuel should be adapted to the engine or whether it is possible to improve equipment such as carburetors and engines so that as much of the crude oil as possible may be used without further transformation is examined in this report. Various ignition points and fuel mixtures are investigated in this regard.

Ignition point measurement and ignition point test equipment is examined in relation to diesel engine reactions.

Report presenting an experiment in the Rechlin airdrome in the fall of 1918 to determine the influence of struts and stays on the speed of an airplane. Results indicated that only a slight increase in horizontal speed was shown in a stayless airplane, but it had considerably greater climbing speed.

The information obtained from flight tests in 1927-1928 covers chiefly the effect of the structural features of an airplane on its stability, controllability, maneuverability and spinning characteristics.

The equilibrium, in still air, of a "stationary" helicopter (i.e., of one having neither vertical nor translational velocity, but a tendency to remain practically motionless within restricted limits of space) presents some difficulty in practice and justifies a theoretical investigation of its "inherent stability," i.e., independent of the pilot.