This article uses case studies to describe three examples of critical experiments that have been conducted in an integrated fashion with modeling activities for titanium alloys, providing valuable information in an accelerated manner.

This article reports a novel mixed-mode coupled displacive-diffusional transformation resulting in homogeneously distributed intra-granular B2 precipitates within the fcc matrix.

This article uses an acoustic metamaterial superlattice for the spatial and spectral deconvolution of a broadband acoustic pulse into narrowband signals with different central frequencies.

Article describes study examining the physical and mechanical properties of polymer composite with wastes that incorporate boron.

This is the Author Manuscript version of an article presenting high-performance hybrid graphene photodetectors prepared with endohedral fullerenes deposited on graphene using electrophoretic methods for the first time.

Article introduces a special issue of the Journal of Nanomaterials that addresses the research studies on fabrication, processing, and applications of self-assembled nanostructures.

This article describes the depositing of plasma nanocoating of allylamine on the surfaces of multi-walled carbon nanotubes to provide desirable functionalities and thus to tailor the surface characteristics of multi-walled carbon nanotubes for improved dispersion and interfacial adhesion in epoxy matrices.

This article discusses an analysis of multiple ignition sites, primary circuits, and burst phase delay distributions.

Article describing optical absorbers based on vertically aligned multi-walled carbon nanotubes (MWCNTs), synthesized using electric-field assisted growth that show an ultra-low reflectance, 100X lower compared to the benchmark, a diffuse metal black - Au-black - from wavelength λ ~ 350 nm – 2500 nm.

Describes study in developing an environmentally benign styrene foam using supercritical CO2.

Article states that thiol-ene/acrylate shape memory polymers (SMPs) have sufficient stiffness for facile insertion and precision placement and soften after exposure to physiological conditions to reduce the mechanical mismatch with body tissue; as a result, they have demonstrated excellent potential as substrates for various flexible bioelectronic devices, such as cochlear implants, nerve cuffs, cortical probes, plexus blankets, and spinal cord stimulators. Here, the authors report a new strategy for designing SMPs with enhanced shape recovery properties and lower moduli than previously reported SMPs under physiological conditions without sacrificing stiffness at room temperature by introducing a hydrophilic monomer.

Article describes study investigating Maxwell-Wagner-Sillars (MWS) dynamics and electromagnetic radio-frequency (RF) actuation of the volumetric phase change in a hybrid polymer composite consisting of hydrogel suspended with high-k nanoparticles.

This article describes a study to observe and quantify the changes of color on wood surface and microstructure of cell walls after the thermal treatment with water, dilute acid and alkali, and to describe the changes of chemical structure on wood surface after those pretreatments.

Article describes study in which researchers attribute the 600% increase in creep life in a prototypical Mg–rare earth (RE)–Zn alloy to multiple mechanisms caused by RE–Zn bonding—stabilization of a large volume fraction of strengthening precipitates on slip planes, increase in vacancy diffusion barrier, reduction in activated cross-slip, and enhancement of covalent character and bond strength around Zn solutes along the c-axis of Mg using atomic-scale characterization and first principles calculations.

Article conducting a systematic study to tune the equimolar precursor ratio of the organic halide (methylammonium iodide; MAI) and metal halide (lead iodide; PbI2) in a fixed solvent mixture of N,N-dimethylformamide (DMF):dimethylsulfoxide (DMSO).

This article reports on the growth, fabrication, and device characterization of NbN internally shunted Josephson junctions with a TaNx barrier.

This article discusses temperature-dependent structural heterogeneity in calcium silicate liquids.

Article demonstrating a practical strategy for synchronizing the properties of compound Josephson junction (CJJ) radio frequency monitored superconducting quantum interference device (rf-SQUID) qubits on a multi-qubit chip.

Article examining the glass durability and residual rate of borosilicate glass. The authors focus on the behavior of the soluble elements of the International Simple Glass (B, Na, and Ca) to show that the residual rate is controlled by the behavior of B, a glass former supposed to dissolve instantaneously when in contact with water and thus widely considered as an ideal tracer. The article demonstrates that B release is controlled by multiple processes highly dependent on the pH. A new paradigm, including B as a key element of the system, is proposed to develop a comprehensive model for the corrosion of borosilicate glass.

This article proposes non-destructive ultrasound effective density and bulk modulus imaging to evaluate 3D voxelated materials printed by J750 Digital Anatomy 3D Printer of Stratasys. This method provides the design map of voxelated materials and substantially broadens the applications of 3D digital printing in the clinical research area.

Article using in-situ neutron diffraction to correlate SF strengthening to work hardening behavior in a low SFE Fe40Mn20Cr15Co20Si5 (at%) high entropy alloy, SFE ~ 6.31 mJ m−2. Cooperative activation of multiple mechanisms was indicated by increases in SF strengthening and γ-f.c.c. → ε-h.c.p. transformation leading to a simultaneous increase in strength and ductility. The present study demonstrates the application of in-situ, neutron or X-ray, diffraction techniques to correlating SF strengthening to work hardening.

Article reporting optical properties of twisted single-layer 2D+ moiré photonic crystals where there is a weak modulation in z direction, and bilayer moiré-overlapping-moiré photonic crystals. This study leads to a potential application of 2D+ moiré photonic crystal in future on-chip optoelectronic integration.

Article describes how the unique thermokinetics of laser-powder bed fusion additive manufacturing has been exploited for development of a novel high strength Al-Ni-Ti-Zr-Mn alloy. The authors say that the addition of 0.5 wt% Mn leads to extraordinary improvement in ultimate tensile strength (502 MPa) and work hardening due to the activation of two Mn-induced strengthening mechanisms

Article describes how protective coatings are important for enhancing tribological behavior, preventing surface degradation, and reducing friction-induced energy losses during the operation of mechanical systems. The authors study the effect of catalytic metals, specifically their compositions and amount, on the tribocatalysis process.