Article reports the computational approach adopted for thermo-diffusion kinetics to rationalize homogenously distributed nanoscale vanadium-rich clusters formed within the martensite laths of Ti6Al4V alloy printed using laser powder bed fusion at an energy density of 52.08J/mm³.

Article investigating HUMIRA effects mentioned in Twitter posts using a relational similarity-based method. The authors were able to identify effects previously known as well as potentially unreported, which demonstrates the power of this method and its potential for studying effects of other medications shared by Twitter users.

Article and accompanying poster presenting a prototype for the use of Edge with MR devices to provide cooperative perception capability to the MR device.

This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological properties.

Article presents research where friction stir additive manufacturing technique was employed to fabricate AZ31B magnesium-hydroxyapatite composite. The study aims to evaluate effect of hydroxyapatite (HA, Ca₁₀(PO₄)₆OH₂), a ceramic similar to natural bone, into AZ31B Mg alloy matrix on biomineralization and biocompatibility.

Accepted Manuscript version of an article presenting the design and development of a smart garment called MyWear that continuously monitors and collects physiological data. It can analyze muscle activity, stress levels, and heart rate variations and send all the data to the cloud. With a in-built alert system, it can notify the associated medical officials if necessary. The authors also propose a deep neural network model that classifies heartbeat data into abnormalities with 96.9% accuracy and 97.3% precision.

Article on the poor mechanical properties of Ti alloys. The study shows that the elastic properties of the ω-phase can be systematically varied as a function of its composition to enhance both the ductility and strength of the Ti-alloy. Furthermore, that ω precipitates are not intrinsically embrittling and detrimental and that Ti-alloys can be created with both good ductility and strength by tailoring ω precipitates' composition instead of completely eliminating them.

This article is a study aimed at predicting and enhancing the properties of the blend, as well as exploring the mechanism, of a polylactic acid (PLA)/amorphous cellulose composite system through molecular characterization. The static properties of the amorphous cellulose/PLA blend model and the mechanical response of the material under uniaxial tension were studied by molecular dynamics simulation to establish the structure–property relationship.

Article conducting an intensive study on the problems of low recognition efficiency and noise in the overlapping structure of protein functional modules, based on topological characteristics of PPI network. Developing a protein function module recognition method ECTG based on Topological Features and Gene expression data for Protein Complex Identification. The experimental results show that the ECTG algorithm can detect protein functional modules better.

This article develops a molecular cell tracker with a strong fluorescence signal in the second near-infrared (NIR-II) window (1,000-1,700 nm) for real-time monitoring of in vivo cell behaviors in both healthy and diseased animal models to address the issue of precisely and quantitatively evaluating the in vivo cell distribution, migration, and engraftment in stem cell therapy.

Article highlighting the potential of utilizing additive manufacturing of HEAs for use in extreme environments that require a combination of tribo-corrosion resistance, mechanical durability, extended service life, and net shaping with low dimensional tolerance.

This article presents the governing equations and analytical solutions of the classical and shear deformation theories of functionally graded axisymmetric circular plates.

This article investigates the reliability and effectiveness of nonwoven zinc(II) oxide-polyvinylidene fluoride (ZnO-PVDF) nanocomposite fiber textiles as an embedded corrosion sensor using an accelerated thermal cyclic method paired to electrochemical impedance spectroscopy (EIS). Results suggest that the flexible sensor is reliable at both monitoring the corrosion and acting as a corrosion barrier.

This article proposes a correction method for image enhancement models based on an adaptive local gamma transformation and color compensation inspired by the illumination reflection model. It is demonstrated that the proposed method adaptively reduces the influence of uneven illumination to avoid overenhancement and improves the visual effect of low-light images.

This article studies the corrosion and corrosion fatigue characteristics of LPBF 316L stainless steels (SS) in 3.5 wt.% NaCl solution using an electrochemical method, high cycle fatigue, and fatigue crack propagation testing.

Article analyses the impact of Covid-19 on various cyber-security related aspects.

Article is a study that designs a smart anode/liquid electrolyte interface for high energy density batteries that present large specific capacity retentions.

Article discusses wearable airbag technology that has been designed to detect and mitigate fall impact. However, this technology has not been validated for the stroke population, so authors investigated whether population-specific training data and modeling parameters are required to pre-detect falls in a chronic stroke population.

This article presents a study on the probabilistic assessment of the seismic performance and vulnerability of corrugated steel plate shear walls (CoSPSWs) using fragility functions.

Article describes how decreasing HVAC energy consumption through insulation effectiveness enables low energy use, low carbon emissions, and high thermal comfort in sustainable buildings. In this paper, two PCMs with transition temperature above and below the outdoor temperature incorporated in highly porous flexible polyurethane foam were evaluated using a one-dimensional (1D) foam core panel built in COMSOL Multiphysics®.

Article describes how, in recent research, additions of solute to Ti and some Ti-based alloys have been employed to produce equiaxed microstructures when processing these materials using additive manufacturing. The present study develops a computational scheme for guiding the selection of such alloying additions, and the minimum amounts required, to effect the columnar to equiaxed microstructural transitions.

Article all-aluminum microchannel heat exchangers have recently gained popularity in the heating, ventilation, and air conditioning industry. Despite their attractive thermal performance design, these heat exchangers make coils used in automotive, commercial, and residential applications prone to crevice corrosion. This study uses high-fidelity conjugate heat transfer simulations to model a micro channel heat exchanger system that includes fins and tubes with crossflow to compare their thermal effectiveness to gain insight into potential crevice corrosion of the MCHE alloy.

Article describes how additively manufactured flexible and high-performance piezoelectric devices are highly desirable for sensing and energy harvesting of 3D conformal structures. This study reports a significantly enhanced piezoelectricity in polyvinylidene fluoride (PVDF) achieved through the in situ dipole alignment of PVDF within PVDF-2D molybdenum disulfide composite by 3D printing.

Article describes how memory allocation and management have a significant impact on performance and energy of modern applications. The authors observe that performance can vary by as much as 72% in some applications based on which memory allocator is used, and in this paper, the authors make a case for offloading memory allocation (and other similar management functions) from main processing cores to other processing units to boost performance, reduce energy consumption, and customize services to specific applications or application domains.