Article on facile, scalable synthesis of edge-halogenated graphene nanoplatelets as efficient metal-free electrocatalysts for oxygen reduction reaction.

This article demonstrates the refinement and uniform distribution of the crystalline dendritic phase by friction stir processing of titanium based in situ ductile-phase reinforced metallic glass composite.

This article demonstrates the effectiveness of an a-BN capping layer in preserving few-layer MoTe₂ material quality and controlling its conductivity type at elevated temperatures in an atmospheric environment.

This article demonstrates that gel reorganization involving high exchange rate of oxygen and low exchange rate of silicon is the key mechanism accounting for extremely low apparent water diffusivity.

Article reports the computational approach adopted for thermo-diffusion kinetics to rationalize homogenously distributed nanoscale vanadium-rich clusters formed within the martensite laths of Ti6Al4V alloy printed using laser powder bed fusion at an energy density of 52.08J/mm³.

Article is a study that designs a smart anode/liquid electrolyte interface for high energy density batteries that present large specific capacity retentions.

This article studies the corrosion and corrosion fatigue characteristics of LPBF 316L stainless steels (SS) in 3.5 wt.% NaCl solution using an electrochemical method, high cycle fatigue, and fatigue crack propagation testing.

This article reports that atomic layer deposition {0002}-textured ZnO films, with nanocolumnar grains and defective sub-stoichiometric structure, exhibit nanocrystalline plasticity and exceptionally low sliding friction and wear.

This article deals with effect of Cr addition (10 at.%) on the partitioning behavior and the consequent effect on mechanical properties for tungsten-free γ-γ' cobalt-based superalloys with base alloy compositions of Co–30Ni–10Al–5Mo–2Ta (2Ta) and Co–30Ni–10Al–5Mo–2Ta–2Ti (2Ta2Ti).

This article reports on a study where 2D TMDs (MoS₂ and WS₂) and the 3D allotrope of carbon and graphite were incorporated into acrylonitrile butadiene styrene (ABS) and polyethylene terephthalate glycol (PETG) matrices in order to form polymer matrix composites (PMCs). The multipronged analysis described in this study was motivated by the purpose to fuse together topics of low-cost, additive manufacturing with 2D layered materials, and studying their ensuing mechanical and tribological properties.

Article studying the influence of microwave signals of different shapes on the magnetoacoustic wave system with a giant nonlinearity in canted antiferromagnet FeBO₃ at room temperature, which is close to its phase transition to the paramagnetic state. Results represent the first observation of the macroscopic quantum statistical phenomenon, Bose-Einstein condensation of magnetoacoustic wave quanta in a wave system with a high level of thermal fluctuations.

This article discusses rapid idothermal annealing of As-, P-, and B-implanted silicon.

This article presents a novel approach to microstructural engineering of refractory high-entropy alloys (RHEAs) to form an "inverted" BCC+B2 microstructure.

Article describes how in recent years, high entropy alloys (HEAs) have been shown to be promising alternatives to common engineering alloys, depending on their composition and thermomechanical processing. In the present work, Gas Tungsten Arc Welding (GTAW) was used to achieve defect-free joints based on a novel transformation induced plasticity (TRIP) Fe50Mn30Co10Cr10 HEA.

Article presents research where friction stir additive manufacturing technique was employed to fabricate AZ31B magnesium-hydroxyapatite composite. The study aims to evaluate effect of hydroxyapatite (HA, Ca₁₀(PO₄)₆OH₂), a ceramic similar to natural bone, into AZ31B Mg alloy matrix on biomineralization and biocompatibility.

Article describes study investigating the effects of testing solutions and conditions on hydroxyapatite (HAp) formation as a means of in vitro bioactivity evaluation of B2O3 containing 45S5 bioactive glasses.

Article highlighting the potential of utilizing additive manufacturing of HEAs for use in extreme environments that require a combination of tribo-corrosion resistance, mechanical durability, extended service life, and net shaping with low dimensional tolerance.

Article on the poor mechanical properties of Ti alloys. The study shows that the elastic properties of the ω-phase can be systematically varied as a function of its composition to enhance both the ductility and strength of the Ti-alloy. Furthermore, that ω precipitates are not intrinsically embrittling and detrimental and that Ti-alloys can be created with both good ductility and strength by tailoring ω precipitates' composition instead of completely eliminating them.

Article describes how, in recent research, additions of solute to Ti and some Ti-based alloys have been employed to produce equiaxed microstructures when processing these materials using additive manufacturing. The present study develops a computational scheme for guiding the selection of such alloying additions, and the minimum amounts required, to effect the columnar to equiaxed microstructural transitions.

Article describes how additively manufactured flexible and high-performance piezoelectric devices are highly desirable for sensing and energy harvesting of 3D conformal structures. This study reports a significantly enhanced piezoelectricity in polyvinylidene fluoride (PVDF) achieved through the in situ dipole alignment of PVDF within PVDF-2D molybdenum disulfide composite by 3D printing.