A computer program which optimizes the locations and strengths of magnets in a beam transport system has been written for the IBM 704 and 7090 computers Programs have been previously written which trace a ray through a system of magnets and determine its focusing properties When using such a program, one examines the characteristics of the emergent beam and then varies the parameters of the system manually to optimize it In the program which will now be described, the computer itself performs the examination and varies the parameters.

The mechanism whereby insulin lowers the blood glucose concentration is currently under extensive investigation. Despite the general agreement that the addition of insulin increases glucose uptake by various isolated tissues, the question has been raised whether administered insulin produces its blood sugar lowering effect in vivo primarily in increasing glucose uptake. Furthermore, it has been suggested that physiologically-released insulin may not exert the same effects as are produced by administered insulin. Attention has also been focused on whether insulin (exogenous or endogenous) exerts its action mainly or entirely on the liver and to what extent insulin influences glucose uptake and glucose production by the liver. The studies to be reported are a continuation of earlier work and are concerned with the effects of insulin, both exogenous and endogenous, on glucose utilization by the tissues and glucose production by the liver under various dietary condition in the unanethetized, intact dog, using C¹⁴ glucose.

Report issued by the Brookhaven National Laboratory containing conference proceedings from the first three sessions of the Symposium in Biology, held June 3-5, 1968. It includes research and papers discussing developments in the structure, function, and evolution in proteins with tables, illustrations, and photographs.

Technical report covering the functions of the Oak Ridge reactor, difficulties encountered with cartridge failures in the Oak Ridge reactor, and possible solutions including the incorporation of leak detection systems into the design of the reactor.

Report issued by the Brookhaven National Laboratory discussing the recently modified FUDGE 4A computer program. As stated in the introduction, "this report presents the details and technical information required for the proper use of FUDGE 4A" (p. 1). This report includes tables, and illustrations.

Several methods of determining meteorite ages depend ages upon nuclides formed by cosmic ray interactions. The tactic assumption is always made that the intensity of cosmic radiation does not vary in time or space. However it is known that the intensity of cosmic radiation at the earth varies with the solar activity. The spectrum of cosmic ray protons and alpha particles exhibit a marked drop at the low energy end (<1.5 GeV) and the intensity in the region appears to follow the 11 year cycle of solar activity. The low energy cosmic rays increase in intensity with a decrease in solar activity. These changes in cosmic ray intensities are generally attributed to a modulation of the galactic cosmic radiation by the magnetic fields associated with the outward streaming solar material, the solar wind. One would therefore expect that the cosmic ray intensity several astronomical units from the sun is greater than the intensity at the earth's orbit, particularly at the low energy end of the spectrums.

The mode of dissolution of magnesium in molten magnesium chloride contacted with Mg-Pb alloys was studied at 750°C using anodic chronopotentiometry. An inert tantalum anode was used to determine relative amounts of magnesium dissolved in its chloride as a function of magnesium activity in the alloy. According to the law of mass action a linear dependence of magnesium solubility on a Mg indicates Mg2Cl2 as the reaction product and a parabolic dependence indicates MgCl. It was found that the amount of magnesium dissolved in its chloride was directly proportional to the magnesium activity in the metal phase, i.e., a linear dependence, indicating Mg2Cl2 as the subhalide species. Due to the corrosive nature of the Mg-MgCl2 system a special apparatus was used so that only the inert metals tantalum and molybdenum came in contact with the melt. Purification procedures and conditions for proper equilibration and measurement were established and are reported. The basic equation of chronopotentiometry, [equation not transcribed], was found to hold and at given magnesium activities the product [unintelligible] did not vary with the current, indicating the validity of the analytical technique.

The first national Technical Conference on Air Pollution (1) held in this city in 1950 included eight papers on meteorology; the present session contains one. On this basis, one night conclude that recent progress in meteorology has been virtually nonexistent or that the importance of meteorological factors has been diminishing, Neither could be further from the truth, as the number and quality of papers relating to air pollution meteorology in recent scientific and technical sessions will attest. It is particularly appropriate to review the status of meteorological "know-how" at this time, because of the many situations in which the ultimate capability of the atmosphere to absorb pollution is in question. Both in connection with highly toxic materials on the one hand and the "megalopolis" on the other, estimates of the "atmospheric sewer capacity" are becoming increasingly necessary to industrial and municipal planning.

Report issued by the Brookhaven National Laboratory discussing papers presented at the International Conference on Fundamental Aspects of Weak Interactions. Each paper that was presented at the conference is included. This report includes tables, illustrations, and photographs.

The desired neutron spectrum for the High Flux Beam Reactor under construction at BNL requires use of U-Al fuel elements with more then 30 wt% U235 in the meat. The operating cycle of this reactor requires a minimum burn-up of 20%, and preferably 40% of the uranium in the element.

Boron-10 has a high thermal neutron capture cross section (3880 barns). Following neutron capture, the subsequent nuclear disintegration produces an alpha particle and a lithium-7 nucleus with the release of an average of 2.34 MeV for the particle irradiation, and in 93% of the reactions there is also the emission of an 0.48 MeV gamma ray: [equation not transcribed]. The kinetic energy is divided between the lithium-7 nucleus and the alpha particle giving the equal and opposite momentums with a range in tissue of about 8-14μ or approximately 1 cell diameter (1). This fact and the reported favorable partition of boron between tumor and the normal brain suggested a possible therapeutic usefulness which has been investigated clinically. The object of our study is to document the biological effects of the B10 (n,α) Li7 reaction on the brain of dogs injected with boron-10 30 minutes prior to irradiation with thermal neutrons. For this, we felt it desirable to estimate a dose for the boron-10 reaction which if exceeded, produces destruction of normal tissue. This dose could then be a reference dose to be utilized as a maximal limit for the irradiation of normal tissue. We have assured that the largest fluence …

The biological evaluation of the thermal neutron capture reaction of boron-10, B10 (n,α)Li7 + 2.786 MeV, has previously been studied, using different particles from the boron-10 thermal neutron capture reaction compared with 250 kvp x-rays has been reported as 1.05 for spleen-thymic weight reduction (1), as 1.5 to 2.0 for skin lesions in pigs (2), and 1.87 for skin lesions of the rabbit's ear (3). The significance of such a calculation is felt to be unreliable for the boron-10 reaction in animals because of the vagaries of dose determination resulting from irregular boron distribution, and by the presence of an adventitious irradiation from fast neutrons and capture gammas that is inadequately determined at present. Our present experiment attempts to circumvent the difficulties attendent to studies of the boron-10 reaction in animals by comparing the effect of this reaction on the proliferative capacity of HeLa cells with those produced with 250 kvp x-ray.

In these lectures we will discuss some examples of information about magnetic properties of solids which can be obtained by neutron scattering. We consider a scattering process in which a neutron with wave vector k and spin σ is incident upon a solid in state q>. (Here q stands for all of the quantum numbers which describe the state of the solid, such as spin and orbital electronic states, phonon numbers, etc.) After interacting with the solid, the neutron goes off with wave-vector k' and spin σ', leaving the solid in state q'>. In performing an experiment of this sort one does not usually observe the initial and final spin states of the neutron or the initial and final states of the solid. We must then sum over all possible final states and average over all initial states.

The present core of the Brookhaven Graphite Reactor consists of some 4900 highly enriched uranium fuel loaded in 615 horizontal fuel channels passing through a 25 foot cube of graphite moderator and reflector. The core is divided into two halves (north and south) by an 8 cm. wide vertical gap in the center of the graphite. The cooling air enters the reactor through inlet filters, at the rate of 270,000 CFM, passes into the central gap and flows bi-directionally through the north and south halves of the core. It then enters the collecting plenums and flows into the north and south ducts. The air is first monitored by the north and south exit air monitors located within the pile building. These are moving filter tape monitors with beta scintillation detectors. They are essentially operational monitors and are maintained by reactor operations. They are essentially operational monitors and are maintained by a reactor operations. The air then passes through the exit air filters, heat exchanger, venturi and on to the fan house where the north and south ducts join. After the fan house the air is monitored by Argon-41 by a Kanne ion chamber syste.

These procedures are intended to be used for the initial operation of the expansion system and serve as a basis for a more complete and revised form to be written once operating experience has been gained. An attempt has been made to offer a logical and systematic presentation to facilitate operation and maintenance of the system by the operating personnel. Thus, the sequence of valve actuations has been presented in matrix and check list form to minimize errors; this also has the advantage of making it easier to adapt certain expansion system procedures to programmed control by a process control computer.

Prior to assembly into the 80" bubble chamber, the expansion system was subjected to a series of tests to check piston dynamics and gain information on the reliability of the various components. Furthermore, the rest provided operating personnel with the opportunity to become familiar with the operation and maintenance of the expansion system. Two separate tests were performed with the apparatus that was located at the north end of the AGS experimental area; one during the week of Oct. 15 and the other during the week of Nov. 12. The system was run with helium gas supplied from AGS compressor room and the piston was operated at room temperature.

The purpose of this report is to determine the amount of refrigeration capacity required to cool down the 80" bubble chamber from ambient temperature to liquid hydrogen temperature.

We consider the kinetic isotope effect in three center reactions of the type of A+BC→AB+C. Such model calculations are a good approximation to primary hydrogen isotope effects. For abstraction or transfer reactions, B becomes H, D, or T. The dynamics of the three storm system are calculated for a general quadratic potential, with the assumption that the potential energy is constant along the reaction coordinate (flat top barrier). This model system can be calculated in detail and serves to illustrate the relationship between kinetic isotope effect and chemical bonding in the transition state. The statistical mechanical part of the calculation can be carried out exactly within the framework transition state theory or in any one of a number of approximations. The γ bar method gives particularly good insight into the chemistry of the problem with a minimum of arithmetic.

Programs are under way at Brookhaven National Laboratory to study the behavior of fission products released from reactor fuel materials. Major emphasis has been placed on fission product iodine because of the physiological hazard associated with the I131 isotope. A complete reactor safety analysis, considering either a slow or rapid release of fission products, requires a knowledge of the chemical and physical states of the fission products during release, the extent of their release, and an understanding of their chemical interactions with the reactor environment.

The following general description of the theory and operation of a bubble chamber is presented so that firms who are interested in fabricating components for the Brookhaven 80" chamber will have a better understanding of the design parameters associated with it. This understanding, coupled with the fabricator's knowledge of manufacturing techniques, should enable the fabricators to suggest solutions to manufacturing problems consistent with requirements for chamber operation. In an effort to increase knowledge of fundamental nuclear particles and their interactions at high energies, various types of detecting equipment have been developed. One of these detectors recently developed is the bubble chamber. While there are variations as to liquids used, expansion techniques, means of illumination, etc. the basic concepts upon which all bubble chambers operate are similar. Therefore, it will be sufficient in this report to consider only one specific type, that is a chamber using liquid hydrogen

Optical absorption and photoconductivity measurements have been made on single crystals of pure synthetic rutile (TiO2). Reactor irradiations at 70°C totaling 4.8 x 10 18 nvt fast and 1.69 x10 19 nvt slow did not produce any discernible optical absorption bands; however, the transmission decreased 5 percent at all wavelengths. Reactor irradiation induced a [illegible] five photoconduction peaks in the wavelength range 4200 to 14,000 A. In addition the photopeak at 4065 A (3.05 eV) was enhanced and there were drastic changes in the dependence of photocurrent with light intensity. Gamma-ray irradiations as large as 10 9 r do not change the conduction properties. The photocurrent is proportional to a power of the light intensity; the power range from 0.65 to 1.24, for the crystals described in this work. The photocurrent vs. voltage dependence is more complex.

The purpose of this report is to compare multi-layer insulation and liquid nitrogen shielding as methods of insulating the 80-inch Liquid Hydrogen Bubble Chamber.

We have decided to try pressure-moulding coathangers, and this is a report on the specifications and tolerances R. R. Rau and I have calculated

Reliability of individual components and the ability to produce refrigeration even if one or two of these components should be in operable are the prime design parameters of this cycle. Each component was looked at with these two parameters in mind and any item that had obvious objections was either rejected or backed up with another piece of equipment. Along this line, you will notice (refer to line schematic) two hydrogen compressors and two nitrogen compressors; for full capacity all are required. However, in the event of the loss of use of one of these compressors, it will still be possible to produce at least 50% of the rated capacity. To eliminate outside influences, the cycle was designed around what may be called a closed cycle cascade system; with the assumption that there is no loss of power, cooling water, the equipment can run indefinitely. The nitrogen and hydrogen cycles are of the Simple Linde type with pre-cooling making use of the Joule-Thompson Effect for the refrigeration produced. The low-temperature components of the cycle have no moving parts other than valves, consisting entirely of counter-flow heat exchangers to lower the temperature of the incoming high-pressure gas to a level where …