The purpose of this experiment is to study the quantitative adsorption characteristics of a carbon adsorber bed receiving a radioactive inert gas in a helium stream. An objective of the experiment is to measure the equilibrium transmission of the radio-active gas through a carbon adsorber in order to determine if radio-active decay of the adsorbed gas permits additional adsorption.

Tests were conducted to determine the friction factor of randomly packed beds of 3/4-inch diameter spheres in 8-inch and 15-1/4-inch diameter beds, and of 1-1/2-inch diameter spheres in 15-1/4-inch diameter bed. The bed depths were varied in an attempt to isolate the effects of entrance and exit losses. The bed Reynolds number, base on sphere diameter, was varied from 5,000 to 50,000.

Two IBM-704 codes have been written which are auxiliary to the Bevatron orbit code BOC. The first, BEFCYF, interpolates among tabulated values of the median-plane magnetic flux density of the Bevatron to produce an equivalent array of values in a form appropriate to BOC. The second, DBDT, produces azimuthal derivatives of the fields produced by BEFCYF. The internal operation of BEFCYF and DBDT is described, and instructions for their execution are given.

"The visible absorption spectra of VA3, CrA3, MnA3, FeA3 and CoA3 (A=C5H7O2, the acetylacetonate anion) are reported. The interpretation of the data in respect to the symmetry and strength of the ligand fields is discussed, with special attention to the presence and magnitudes of trigonal components in ligand fields and its consistency with certain results of paramagnetic trigonal fields of appreciable magnitude are present."

Report discussing the dissolution of simulated fuel cores. Equipment and procedures are discussed along with significant characteristics of the core materials.

Reactivity measurements made by the pulsed neutron technique were compared with results obtained by conventional techniques. The pulsed neutron results were in good agreement with those obtained by stable period measurement and rod drop. Differential effectiveness of partially inserted rods was shown to be well represented by elementary perturbation theory. Finally, the pulsed neutron technique was found to be the only good method for measurement of large reactivity changes.

The magnetic properties of core materials ae investigated for a pulse width of 30 nanoseconds. Methods of testing which are necessitated by the sort pulse width are explained and the design of the pulser which is capable of 0.2 megawatt peak power is described. The data obtained if evaluated and presented for the various materials which were tested.

From Present Programs: "There has been a gradual expansion of the Sr^90 food analysis program to include vegetable foods and finally entire diets. In some cases the analyses have also been extended to other nuclides but these data are so limited that they will not be emphasized in this report. It is expected that considerable data on Ra^226 and other naturally occurring radionuclides will be generated in coming year."

"This is the first quarterly report on Task II of the subject Utilization of Radioactive Isotopes in Coal Process Research. There were two separate projects on Tank I; I. methods Development for Tritium Labeling of Coal Product Hydro-carbons, and II. Applications of Radio-Tracer Techniques to the Study of Fluidized Particle Mechanics. The following extended work on Task II concerns only Methods Development of Radio-Tracing With Tritium."

Report discussing the "equilibrium uranium distribution between an aqueous nitric acid solution and a 30 per cent by volume solution of tributyl phosphate in a hydrocarbon diluent" (p. 2). This includes the necessary equations.

A program has begun embodying a study of the diffusion rates of krypton and xenon into unirradiated UO2 and UC at temperatures between 1000°C and 2500°C.The experimental technique is described in some detail, involving exposure of UO2 and UC samples to a Kr85 atmosphere at various temperatures, removal of surface-adsorbed krypton, dissolution of the sample, collection and ion chamber measurement of the diffused Kr, and calculation of diffusion coefficients from these data.

This report is a corrected copy of the authors "rapporteur talk" at the 1959 Kiev Conference on High Energy Physics. It contains data on the rapporteur system and on interactions of strange particles with protons and neutrons, using data from bubble chambers, counters, and emulsions.

Abstract: Development of welding processes for stainless steel fuel elements, previously initiated by Alco Products, was continued in Task 5. Three objectives were accomplished; (1) development of a suitable reference welding process, (2) evaluation by out-of-pile tests of the structural integrity of reference welded fuel elements, and (3) preparation of specifications and fabrication procedures for the reference welding process.

Quarterly report describing progress on a project to develop and evaluate high-temperature tungsten alloys. This report discusses experimentation with fabrication to improve thermal stability of tested combinations by further alloying.

Report issued by the Oak Ridge National Laboratory discussing quarterly progress made by the Homogeneous Reactor Program. It includes descriptions of progress and studies conducted during the report period, with tables, illustrations, and photographs.

This report deals with the structural and lithologic features within and adjacent to the San Juan mineral belt and the relation of these features to the ore deposits.

The reason for initiating the compact drive study for the T7 tanker was to investigate control rod drive size, location, and removal space requirement factors and select the control rod drive mechanism which would allow optimization of the over-all size of the containment vessel. Approximately twelve mechanical/hydraulic control rod drive arrangements were considered during this study.

Abstract: A definitive investigation of the boron-carbon equilibrium system is being made by X-ray diffraction, metallographic, and thermal analytical techniques. Alloys are being produced by sintering pressed powder aggregates with subsequent arc melting. Alloys have been made at two atomic percent intervals up to thirty atomic per cent carbon. In the future, higher carbon compositions are to be investigated. Techniques have been worked out for the metallographic preparation of the extremely hard and friable alloys.

This partially annotated bibliography contains references on advanced space propulsion units. References are also included on auxiliary power units, energy requirements, and mission requirements. The references are arranged alphabetically by title, with corporate author and subject indexes provided. This bibliography is issued in two parts: CNLM-2370-3, Part I, contains unclassified references; CNLM2370-3, Part II, contains classified material. Sources used in compiling this bibliography are: Abstracts of Classified Reports 1957-June 1960, Applied Science and Technology Index 1958-June 1960, ASTIA 1958-June 1960, Engineering Index 1957-1959, Industrial Arts Index 1957, Nuclear Science Abstracts 1957-June 1960, U.S. Government Publications Monthly Catalog 1958-June 1960.

Abstract: This report presents the vapor pressures versus temperature data graphically for the rare earth elements, yttrium and scandium.

Abstract: This report describes a 300,000-kwe, sodium-cooled, graphite-moderated nuclear power plant based on existing technical information.

Presented at session S-1 of the Tenth Annual International Conference on High-Energy Physics, Rochester, New York, August 25- September 1, 1960. The analysis of the latest experiments on p-p scattering at 210 Mev makes it probable that there is a unique set of phase shifts at this energy. Under reasonable assumptions about continuity of the phase shifts and the behavior of the higher partial waves, it is possible to pick a unique solution also at 310 and 95 Mev. This opens a new era in the analysis of nucleon-nucleon scattering, which should lead to a unique model for the scattering matrix up to 400 Mev. Theoretical attempts to calculate a "meson potential" from field theory have not been successful, and the semi-phenomenological potential models, although now in good qualitative agreement with experiment, are not quantitatively reliable. Instead of using these models as a basis for an energy-dependent parameterization of the scattering matrix, as was done by Breit and his collaborators, it is here argued that the Mandelstam representation offers a more reliable starting point. A formalism is developed which allows the one and two pion exchange interaction to be included exactly and gives a Lorentz-invariant description of the rest of …

The adequacy of the Consolidated Edison Thorium Reactor (CETR) control rod drive line operation was evaluated and proven by the development program described in this report. This program also included evaluation of materials and fabrication processes.

The Consolidated Edison Thorium Reactor Control System has been designed to provide the operators with a reliable, safe and accurate means of controlling the plant. Manual and automatic positioning of control rods can be accomplished. The automatic plant controller has been designed to meet the design criteria under the representative CETR demanded load changes. Adaptability has been built into the plant controller by providing variable controller adjustments for variations in reactor characteristics. Extensive analog studies have been made of the various plant parameters and their effect on control was carefully evaluated. These analog studies have shown that the control system will perform in a satisfactory manner under the most adverse plant conditions.