Report regarding an airborne gamma-radioactivity survey that took place in the 2,800 square mile area around the Los Angeles region in California. Topics include the types of bedrock noted in the area as well as their levels of radioactivity.

Abstract: "The pressure drop and the time-temperature variation of the air test medium and heat storage material in a pebble-bed heater (designed for intermittent hypersonic wind-tunnel operation at test section Mach numbers of 4 to 11) are presented."

A carrier-free separation of hafnium from several hundred milligrams of rare earth oxides by anion exchange from saturated HC1 solution is given. The procedure is completed in 4-8 hours and is suitable for remote control work.

Graphical presentation of K-factors for eight isotherms, published data on the solid-vapor region, and a bibliography of approximately 450 references.

"This bibliography lists selected books, articles, and unclassified reports which have appeared in the following abstracts and indexes between August 1959 and December 1960."

Report describing the design and usage of the BORAX V nuclear reactor, its surrounding facility, systems, experimental programs, and possible hazards.

Introduction: Recently a new type of charged particle detector, the so-called spark chamber, has been developed. The detector has certain advantages in high energy physics over bubble chambers aside from its much lower cost.

Report containing "[a] description (...) of the design of a prototype "packaged" nuclear power plant. The purpose of the plant is to alleviate fuel oil logistics and storage problems posed by remote auxiliary DEW Line radar stations north of the Arctic Circle. The ALPR (redesignated SL-1) is a 3 Mwt, heterogeneous, highly enriched uranium- fueled, natural-circulation boiling water reactor, cooled and moderated with light water. Steam at 300 psig, dry and saturated (421 deg F) is passed directly from the reactor to a conventional turbine-generator to produce electric power (300 kw nominal) and space-heating (400 kw) requirements consistent with rigid mechanical and structural specifications prescribed by the military, and dictated by the extreme geophysics prevailing at the ultimate site. The over-all design criteria emphasize: simplicity and reliability of operation and maintenance, with minimum supervision; minimum on-site construction; maximum use of standard components; limited water supply; utilization of local gravel for biological shielding; transportability by air lift; and nominal 3-year fuel operating lifetime per core loading." (p. 15)

"The laboratory experiments and field testing which were carried out in the development of a homogeneous gas labeling device are described. Detailed drawings of the injector and its most critical components are included. Recommendations are made for a production model of the device along with estimated costs of construction."

From introduction: This report details the results of a 256-pound high explosive cratering experiment at the Chariot test site 110 miles north of the Arctic Circle.

From introduction: "Once-Through boiling of water to 100 per cent steam quality was successfully accomplished. Results of Departure from Nucleate Boiling, transition, and film boiling tests are presented."

Introduction: The primary objective of the work of this report was research and development leading to large-scale applications of low level isotope tracer technology.

From abstract: Crater dimensions have been determined for 23 explosions of 256-pound spherical TNT charges buried in desert alluvium. As opposed to previous work covering depths of burst as great as 6 feet, the work presented in this report extends knowledge of apparent crater radius and depth to depths of burst as great as 30 feet.

"The understanding of interactions between the elementary particles, which no number thirty, and range from the massless neutrino to the Е with a mass of approximately 1320 Mev, in a prerequisite to the knowledge of the structure of matter. Although the complex aggregate of elementary particles which constitute matter displays properties different from those of the basic building blocks, nevertheless it is impossible to gain a firm knowledge of the behavior of matter without first ascertaining in the intrinsic properties of elementary particles, as well as the dynamics of their interactions. The present work is concerned with inelastic proton-proton scattering at 1.35 Bev, where single pion production predominates."

The methods of successive displacements or relaxation methods are investigated for a class of nonlinear problems. In particular it is shown that these methods are applicable to a large class of nonlinear problems arising from variational problems which yield elliptic equations. Constructive existence and uniqueness theorems are presented for the discrete problem and criteria are given for a practical method of obtaining solutions. The example of a discrete Plateau problem is used to illustrate the feasibility of the results. The processes are also shown to apply to uniformly elliptic problems.

This reference manual describes the IBM 704 program called Kick, by which complete bubble chamber events are kinematically analyzed. Kick's input data is the output from the Pang program, which uses raw track measurements to spatially reconstruct the tracks, and fits appropriate curves to them.

"The present work describes some computer-oriented techniques for the application of the laws of quantum mechanics to the problems of determining basic structure of diatomic molecules. At times, calculations of the type described here yield results which can be compared directly with experiment to check the validity of the hypotheses and technique used they may predict the results of unobserved experimental phenomena; and, in many instances, they provide quantities which are necessary for the interpretation of experimental data but which cannot be directly measured."

From Abstract: "The equipment described in this paper is based on the technique developed by McSkimin. Figure 1 shows a block diagram of the system. The oscilloscope presentation with no specimen present appears as shown in Figure 2a. At discrete frequencies, the pattern appears as shown in Figure 2b."

Report issued by the Brookhaven National Laboratory discussing uranium-bismuth corrosion test loops. Design, construction, and operation of the test loops are presented. This report includes tables, illustrations, and photographs.

"This is the fourth Quarterly Report on Task II dealing with Methods Development for Radio-Tracing of Coal Product Hydrocarbons With Tritium. The problem of radio-chemical purity of traces is resolved by developing a new method of labeling with tritium that generates essentially no highly tagged side products or impurities."

Report describing the zero-power experiments on the Argonne Low Power Reactor. It is a prototype of a natural-circulation, boiling-water-reactor nuclear power plant designed to supply the electrical power and space heat requirements of a proposed Auxiliary DEW Line radar station.

"A method and equipment are described for determining the surface parameters of contact required for heat transfer calculations. In this method, the output of a surface analyzer for one surface is recorded on one channel of magnetic tape and the output for the other surface of the contact pair on a second channel. The tape is played back to an analog computer which then integrates the analog voltage to compute the void volume thickness, the number of contact points, and the ratio of metallic contact area to the total area."

Monthly report the progress and development of improved zirconium alloys for service in superheated water and steam. This report covers the period between April 1 to April 31, 1961 and was conducted by the United States and the European Atomic Energy Community (EURATOM).

"Graft polymers were made by Co60 mutual irradiation of mixtures of styrene and methyl acrylate in contact Teflon. These graft copolymers were analyzed by infra-red absorption and their composition determined. The composition of the graft copolymer formed from styrene and methyl acrylate was different from that which is predicted by the copolymer composition equation."