The amount of dry air or inert gas supplied to a "one pass" glove box ventilation system is proportional to the glove box inleakage. Most glove boxes in the 234r5 Building are equipped with sundry attachments, each contributing to the inleakage. No individual leak rate date is available for these auxiliary components in the "as installed" condition. Nor is the effect of time upon the leak rates known. Knowledge of these values, or at least an indication of the order of magnitude of the leakage attributable to each item, would provide a basis for analyzing glove box ventilation problems and for establishing criteria for new glove box designs.

A coolant line rupture during operation of a high temperature gas cooled graphite moderated reactor would present a serious hazard. The reactor would immediately depressurize and a great deal of air would be introduced into the coolant stream. As the air passed over the graphite moderator a runaway oxidation reaction would probably ensue unless an adequate safety system were available. This investigation was designed to evaluate chlorine as a reactor safeguard to be used to control a runaway reaction. Throughout this study, a small amount of chlorine in an air stream has demonstrated the ability to substantially reduce the oxidation rate of graphite. This has been the case even where the principal oxidizing agent was molecular oxygen or ozone.

The multi-purpose dissolver was designed to provide: 1. A critically safe vessel for dissolving uranium metal of enrichments up to one percent U-235. 2. A vessel which can be charged with fuel elements up to 10 feet long. 3. An off-gas arrangement which will eliminate return of ammonia to the dissolver during the Zirflex decladding process. 4. A vessel in which small charges can be dissolved without using extra chemicals. 5. A by-pass routing around the silver reactor during cladding removal.

Report documenting the Halogen Collector Test program, which was undertaken to provide "methods of removing trace quantities of radioactive iodine from an air stream" (p. 1). The report includes designs of the program and the test facility, test results, analysis of these results, and encountered problems. Appendices begin on page 38.

"The following is an alphabetical listing of terms and units in common usage at Hanford Atomic Products Operation. Other terms and definitions may be added as the need becomes apparent or as revisions or additional terms are issued by the NCRP and ICRP."

This is the second of two reports describing the phases of a study of the wear and galling of autoclaved Zircaloy-2 by various fuel element support materials. The first report (1) showed that increasing contact area between the autoclaved Zircaloy-2 support and the autoclaved Zircaloy-2 process tube will not significantly improve the fuel support performance, and that a large flat contact area between the fuel supports and the process tube would be impractical to endeavor to achieve and maintain. It also showed that metals softer than Zircaloy-2 do not scratch the process tube but that loss of these metals by abrasion into the reactor coolant might be a problem.