This partially annotated bibliography contains 334 references from papers published from 1945 to 1959 and includes references on the consumable - and nonconsumable - electrode vacuum arc melting process. References are also given on electrode preparation, furnace construction and operation, melting, sintering, vacuum techniques, and theory.

"The correction to photon-photon scattering processes due to the existence of the particles other than electrons is reported. The correction is of the same order in the electric charge as the lowest order term in the perturbation expansion in quantum electrodynamics, although the relevant corrections to the electron-photon and electron-electron scattering are all of higher order."

Abstract: Neutron flux and gamma radiation measurements through the SM-1 primary shield were made at the startup of Core II in June 1961. They extend previous measurements (APAE-35) both vertically and horizontally in the primary shield and in the rod drive pit. Dose rate measurements on spent fuel elements under water are also reported.

Summary: The design, construction and assembly of all components were completed during the first contract year previous to December 1963. These efforts, defined by Tasks A-F, are document in (1), (2), and (3). Brief summaries of these completed efforts are given in the introduction to each of the tasks in the text of this report. The digest given below covers only the shakedown and analysis work carried out in the fourth quarter of the first contract year. Task G Shakedown Tests. The photographic procedure has been experimentally defined for the glass test section. Four automatic 35 mm cameras and four strobe light sources have been ordered on ATL funds and their respective mounting arrangements are in place. Roughly ten test runs were carried out in the glass test section during the course of the above work. Satisfactory recorder traces have been obtained on all measurement systems. These systems presently meet the accuracy and linearity specifications initially set. An x-ray void fraction signal adjustment and filtering circuit has been design and installed to provide equal resolution across the test section. Calibration disc inserts have been installed to permit satisfactory beam intensity calibration. Good agreement has been obtained between calculated and measured …