Report discussing several aspects of pitot and venturi tubes, including the energy equation for steady adiabatic flow, introduction of mean speed into the energy equation, isentropic flow of an ideal gas, the theory of the pitot tube, and the theory of the venturi meter.

The third volume of a series of reports containing the proceedings of the Focused Research Program on "Spectral Theory and Boundary Value Problems."

Report on the asymptotic behavior of certain generalized solutions of the problem of the prescribed mean curvature equation.

A recently developed computer program, based on geometric programming, was used to evaluate the chemistry of gaseous and condensed products that arise in conversion of Illinois bituminous coal under both oxidizing and reducing conditions.

This effort was directed at developing an electrochemical process for forming uniform and dendrite-free deposits of uranium from molten salts. This process is to be used for the electroformation of free-standing hemispherical shells of uranium for nuclear applications.

Possible methods for disposing of the immobilized raffinate from TRUEX processing are reviewed. The purpose of the TRUEX process is to extract transuranium elements from high-level and TRU wastes into a small volume that can be managed at lower cost than that of the original wastes. The raffinate from the TRUEX process, containing negligible concentrations of transuranium elements, would be combined with salt solutions also derived from processing high-level waste, and the mixture would be converted to grout.

Fuel cells offer the potential of a clean, efficient power source for buses, cars, and other transportation applications. When the fuel cell is run on methanol, refueling would be as rapid as with gasoline-powered internal combustion engines, providing a virtually unlimited range while still maintaining the smooth and quiet acceleration that is typical for electric vehicles.

Metal cutting techniques that can be used to segment the reactor pressure vessel of the Experimental Boiling Water Reactor (EBWR) at Argonne National Laboratory (ANL) have been evaluated by Nuclear Energy Services. Twelve cutting technologies are described in terms of their ability to perform the required task, their performance characteristics, environmental and radiological impacts, and cost and schedule considerations. Specific recommendations regarding which technology should ultimately be used by ANL are included. The selection of a cutting method was the responsibility of the decommissioning staff at ANL, who included a relative weighting of the parameters described in this document in their evaluation process.

In 1956, the Experimental Boiling Water Reactor (EBWR) Facility was first operated at Argonne National Laboratory (ANL) as a test reactor to demonstrate the feasibility of operating an integrated power plant using a direct cycle boiling water reactor as a heat source. In 1967, ANL permanently shut down the EBWR and placed it in dry lay-up. This project plan presents the schedule and organization for the decontamination and decommissioning of the EBWR Facility which will allow it to be reused by other ANL scientific research programs. The project total estimated cost is $14.3M and is projected to generate 22,000 cubic feet of low-level radioactive waste which will be disposed of at an approved DOE burial ground. 18 figs., 3 tabs.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research.

The optical spectra of actinide ions in the compound AnCl₃ and doped into single crystal LaCl₃ were interpreted in terms of transitions within 5f{sup N} configurations. Energy-level calculations were carried out using an effective operator Hamiltonian, the parameters of which were determined by fitting experimental data. Atomic and crystal-field matrices were diagonalized simultaneously assuming an approximate D{sub 3h} site symmetry. The spectroscopic data were taken from the literature but in most cases supplemented by unpublished measurements in absorption and in fluorescence. Spectroscopic data for each ion were analyzed independently, then the model parameters were intercompared and in many cases adjusted such that in the final fitting process the principal interactions showed uniform trends in parameter values with increasing atomic number. Consistent with analyses of the spectra of lanthanide ions in both LaCl₃ and LaF₃, abrupt changes in magnitude of certain crystal-field parameters were found near the center of the 5f{sup N}-series. This resulted in two groups of parameter values, but with consistent trends for both halves of the series, and generally very good agreement between observed and computed energies. A new energy level chart based on computed crystal-field level energies for each trivalent actinide ion has been prepared. in addition, …

One aspect of Argonne research in parallel computing involves the speed and other properties of parallel SDI algorithms. Various algorithms under study have exhibited speedups resulting from parallelization on shared-memory machines. A weapon-target accessibility algorithm called ACCESS exhibited a high degree of inherent parallelism and has been studied on a wide variety of sequential and parallel multiple instruction multiple data (MIMD) machines. To study ACCESS on a massively parallel single instruction multiple data (SIMD) machine architecture, ANL researchers developed a version of ACCESS on a Thinking Machines Corporation 16K processor Connection Machine-2 (CM-2) located at the ACRF. ANL researchers wrote the Connection Machine version of ACCESS in C(*), a version of C by Thinking Machines Corporation with extensions to accommodate SIMD parallelism. Because of the large number of available physical processors and the ability to create virtual processors on the CM-2, the Connection Machine version of ACCESS was able to process an array of 128 x 1024 tasks in parallel. For the data tested, the CM-2 implementation of ACCESS was faster than both the parallel version run on the Alliant FX/8, the Encore Multimax, and the Sequent Balance and the sequential version run on the ANL Cray X-MP/14. For the …

This paper summarizes our investigations into the computational detection of secondary and tertiary structure of ribosomal RNA. We have developed a new automated procedure that not only identifies potential bondings of secondary and tertiary structure, but also provides the covariation evidence that supports the proposed bondings, and any counter-evidence that can be detected in the known sequences. A small number of previously unknown bondings have been detected in individual RNA molecules (16S rRNA and 7S RNA) through the use of our automated procedure. Currently, we are systematically studying mitochondrial rRNA. Our goal is to detect tertiary structure within 16S rRNA and quaternary structure between 16S and 23S rRNA. Our ultimate hope is that automated covariation analysis will contribute significantly to a refined picture of ribosome structure. Our colleagues in biology have begun experiments to test certain hypotheses suggested by an examination of our program's output. These experiments involve sequencing key portions of the 23S ribosomal RNA for species in which the known 16S ribosomal RNA exhibits variation (from the dominant pattern) at the site of a proposed bonding. The hope is that the 23S ribosomal RNA of these species will exhibit corresponding complementary variation or generalized covariation.

This manual was designed to provide complete documentation for the computer system used by the EBR-II Fuels and Materials Department, Argonne National Laboratory-West (ANL-W) for accountability of special nuclear materials (SNM). This document includes background information on the operation of the Fuel Manufacturing Facility (FMF), instructions on computer operations in correlation with production and a detailed manual for DYMAC operation. 60 figs.

This report provides a preliminary assessment of some magnetic heat pump (MHP)/refrigeration concepts for cryogen liquefaction and other industrial applications. The study was performed by Astronautics Corporation of America for Argonne National Laboratory under the sponsorship of the U.S. Department of Energy.

Progress report of the Argonne National Laboratory's Nuclear Technology Programs, including applied physical chemistry, separation science and technology, and high level waste and repository interactions.

Report on the activities of Argonne Advanced Computing Research Facility, including LAPACK, vectorizing compilers, algorithm design and restructuring, automated deduction, three-dimensional scientific visualization, and graphics trace facilities.

Annual report for the superconductor program at Argonne National Laboratory discussing the group's activities and research. This report documents research efforts aimed at producing superconducting components based on oxide systems.

Otter is Other Techniques for Theorem-proving and Effective Research), a revolution-style theorem-proving program for first-order logic with equality.

Supplemental paper organized as a series of questions and answers, outlining the reasoning by which the proposed standard for Ada came to acquire certain features and exclude others.

Revision of supplemental paper on proposed Ada standard, organized as a series of questions and answers.

A conference at Argonne National Laboratory for senior executives of small and medium-size manufacturing companies covered technical and managerial issues involved in adapting advanced materials and new manufacturing methods. Seven speakers discussed how high performance metals, alloys, ceramics, polymerics and their composites are replacing conventional mill-product materials and how these new materials are impacting manufacturing methods and products.

Report on development of compressed multifoil insulation for high-temperature batteries and other applications.

This report describes the ongoing development of experimental techniques for measurement of local specific interfacial area in gas-liquid and liquid-liquid two-phase systems. Mathematical relations between local specific interfacial area and measurable quantities are derived based on kinematics and geometry. Two methods for determining local specific interfacial area are identified; both entail detection of passage of interfaces through fixed locations in the flow field. A multiple-sensor electrical-resistivity-probe technique is being developed for determination of local specific interfacial area in vertical gas-liquid bubbly flows. The technique consists of simultaneous measurements at two or four locations in the two-phase flow field of the local electrical resistivity of the two-phase mixture. Methods for data analysis are described. Limitations of the technique are briefly discussed.