From abstract: Project Dugout was a chemical explosive row charge cratering experiment in hard rock conducted at the AEC Nevada Test Site as part of the Plowshare Program for development of nuclear excavation technology.

This is a summary report of various technical projects relating to uranium.

Technical report. Form Abstract : "Perchlorate is extracted from aqueous solution by n-butyronitrile as ferrous 1,10-phenanthroline perchlorate. The amount of perchlorate is calculated from spectrophotometric measurement of the absorbance of the extract. Moderate to large amounts of chloride, sulfate, or nitrate cause little or no interference. Chlorate is slightly extracted but the interference can be corrected."

Abstract: Distribution coefficients have been measured for the partition of metal ions between cation exchange resin and acetone-water-hydrochloric acid solutions. the differences in distribution coefficients of metal ions are greater in acetone-water media than in aqueous media of the same hydrochloric acid concentration. Using distribution coefficient data, conditions for column separations of mixtures can be selected. Column separations of metal ion mixtures can be effected by eluting with acetone-water-hydrochloric acid solutions of different compositions. Successful separations of a number of mixtures are reported.

This paper reports an extension of previous experimental work with Alfven waves. We consider hydromagnetic waves propagating in a cylindrical plasma in a uniform axial magnetic field. The copper tube is filled with highly ionized plasma by an electrically driven switch-on ionizing wave. After the tube is filled with plasma, a hydromagnetic wave is induced by a radial current flow from the small molybdenum electrode to the copper tube. The force produced by this radial current together with the static axial magnetic field displaces the plasma in the azimuthal direction, and a transverse wave is propagated in the axial direction, along magnetic field lines. The transient magnetic field associated with the wave is also in the azimuthal direction.

A research and development program aimed at devising processes for the economical recovery of the potentially valuable long-lived fission products from Purex waste has been under wat at Hanford for several years. When this work has begun, the concentrated waste was primarily a nitric acid solution (6 to 10 M HNO3) containing the fission products and relatively small concentrations of iron, sulfate, and other corrosion products. Flowsheets based on classical separation schemes and rather similar to processes used by the Isotopes Division at the AEC's Oak Ridge operation served to separate the desired fission products from one another and from the corrosion products (1,2,3).These separation schemes employed careful step-wise pH adjustment to precipitate first the iron and then to separate the desired fission products from one another. The flowsheets were demonstrated on a pilot-plant scale with full-level plant waste. However, since the earlier work was complete, plant operations have been modified....

The measurements reported here are companion measurements to those reported earlier in HW-63585. The only significant difference between the measurements is that 1.8 w/o enrichment UO2 fuel was used for the first set, and 2.6 w/o enrichment UO2 fuel was used for the measurements described in this report. The new results will be presented graphically, and for completeness, the details of the measurement will be included here as well as in HW-63585.

Four capsules containing Al-1.65 w/o Pu and Al-12 w/o Si-1.65 w/o Pu were charged into the MTR. These capsules will be irradiated to a burnup of 80-100% of the plutonium atoms to determine the stability of the material at high exposures. An additional sixteen capsules containing 5 to 20 w/o Pu in Al and Al-Si have been prepared. Eight are awaiting reactor space and should be charged soon. The remaining eight are being recanned to increase the end gap between the core and the can. Also four capsules containing high density UO2-PuO2 pellets canned in Zircaloy are awaiting assignment of reactor space.

A 19-rod Zircaloy-clad half-length PRTR spike element successfully irradiated to high plutonium burnout at full power in the ETR shoved partial bonding of the core and cladding. Unsatisfactory autoclave films on the Zircaloy cladding of the PRTR Al-Pu fuel elements are delaying final assembly of the first 30 clusters. Further conditioning of the autoclaves and the availability of permanent etching facilities are expected to correct the present difficulties.