Report discusses the results of two tests: "1) aerodynamic tests to determine the effect of the slipstream and thrust from the powered propellers on the lift and trimming-moment characteristics, and 2) hydrodynamic tests to determine the effect of the powered propellers on the range of stable locations of the center of gravity (from Introduction)." Large differences in the stable range between half-thrust and full-thrust conditions were observed. Three effects of power were also involved in the location of the stable range of the center of gravity.

"An analysis was made to show the relative effectiveness of streamline external fuel tanks, a fuel tank in the form of a wing mounted in a biplane position, and auxiliary wing panels attached at the wing tips to increase the span as temporary means for increasing the range of a fighter-type airplane. Figures and charts for the various devices considered show the results of calculations of range, duration of flight, and take-off distance for both land-base and carrier operation. The results indicated that the wing-tip extensions were the most promising of the devices considered" (p. 1).

"Tests were made of riveted double-angle columns to determine the total rivet strength that is required to make these built-up columns develop the strength predicted by the standard column formulas. Results of the tests led to the conclusion that the required rivet strength may be calculated by the beam method of design" (p. 1).

Report discusses the results of shear testing in which the heads of Du Pont explosive countersunk rivets were allowed to protrude above the skin surface before expansion and the protruding portions were removed after expansion. As the height of the rivet head above the skin increases, the tightness of the rivet was found to increase. The report concludes that it may be desirable to investigating filling an entire shank with an explosive charge in order to permit greater tolerances in the drilled hole diameter and still have consistently tight rivets.