"The purpose of this report is to examine the safety aspects of PNPF restart on continued operation, after completion of the core cleanup and system modifications."

Report describing a gravimetric hygrometer that serves as the NBS standard instrument for the measurement of the moisture content of gases on an absolute basis in terms of mixing ratio (mass water vapor/ unit mass of dry gas). The National Bureau of Standards and other laboratory reference and working instruments are compared and calibrated with this instrument. The measuring operation involves the absorption of the water vapor from a water vapor-gas mixture by a solid desiccant and the determination of the mass of this water vapor by precision weighing; it also involves the determination of the volume of the associated gas of known density by counting the fillings of two calibrated stainless steel cylinders. The construction and operation of the instrument is described. Discussions of the tests and calibrations of component parts, and of the sources of errors also are included. There is also an analysis of the random and systematic errors effecting the overall accuracy in the determination of mixing ratio.

Abstract: The structural design criteria and the system basic loads for the SNAP 2 compact power unit are presented.

Report that "summarizes the costs, experience and results of contracts AT(10-1)-1054 and AT(10-1)-1122 for drilling, casing and cementing observation wells at the National Reactor Testing Station, Idaho" (p. [11]).

Study of the effects on Zircaloy-2 radiation corrosion of a high concentration of excess H2SO4 in a uranyl sulfate test solution using an in-pile loop experiment.

From foreword: This final report summarizes the results of a project to develop a machine calculation code program using the Monte Carlo technique to compute radiation flux or dose rates from radioisotope sources.

Some numerical calculations have been done which permit the deduction of many properties of the synchrotron oscillation problem. For the presentation of the numerical results, it is useful to review the formulation framework to which the results are to be fitted. These are worked out for an arbitrary circular accelerator. The algebra woud have to be modified slightly to include straight sections but the numerical results are still useful.

"This bibliography lists selected books, articles, and unclassified reports which have appeared in the following abstracts and indexes between August 1959 and December 1960."

Introduction: Recently a new type of charged particle detector, the so-called spark chamber, has been developed. The detector has certain advantages in high energy physics over bubble chambers aside from its much lower cost.

"The laboratory experiments and field testing which were carried out in the development of a homogeneous gas labeling device are described. Detailed drawings of the injector and its most critical components are included. Recommendations are made for a production model of the device along with estimated costs of construction."

From introduction: "Once-Through boiling of water to 100 per cent steam quality was successfully accomplished. Results of Departure from Nucleate Boiling, transition, and film boiling tests are presented."

The methods of successive displacements or relaxation methods are investigated for a class of nonlinear problems. In particular it is shown that these methods are applicable to a large class of nonlinear problems arising from variational problems which yield elliptic equations. Constructive existence and uniqueness theorems are presented for the discrete problem and criteria are given for a practical method of obtaining solutions. The example of a discrete Plateau problem is used to illustrate the feasibility of the results. The processes are also shown to apply to uniformly elliptic problems.

"The present work describes some computer-oriented techniques for the application of the laws of quantum mechanics to the problems of determining basic structure of diatomic molecules. At times, calculations of the type described here yield results which can be compared directly with experiment to check the validity of the hypotheses and technique used they may predict the results of unobserved experimental phenomena; and, in many instances, they provide quantities which are necessary for the interpretation of experimental data but which cannot be directly measured."

"This is the fourth Quarterly Report on Task II dealing with Methods Development for Radio-Tracing of Coal Product Hydrocarbons With Tritium. The problem of radio-chemical purity of traces is resolved by developing a new method of labeling with tritium that generates essentially no highly tagged side products or impurities."

From introduction: A thorough investigation, both experimental and theoretical was carried out on plaque type radiators. Five phases of the work are reported: preliminary design analysis, experimental measurements, computational program and analytical studies, followed by a general discussion of source design principles. The results are summarized in graphs and formulae which may be applied to other design requirements.

Abstract: A loop has been constructed to study the removal of water and highly volatile materials from Organic Moderated Reactor coolant by vacuum degasification. An analysis of the process was made to determine the most important parameters for study during the experimental program.

Abstract: Accurate measurement of OMRE fuel-element surface temperatures is important for evaluation of the performance of organic compound as moderator and coolant materials in nuclear reactors; a mixture of polyphenyls has been used in reactor operation to-date.

Abstract: The influence of plutonium on the nuclear characteristics of organic moderated cores is studied.

Introduction: In conjunction with the final design and development of a 70 MW sodium intermediate heat exchanger and a sodium steam generator, an analysis is required which can be used as a basis for a determination to scale up or scale down the designs. Included in this analysis are those considerations leading to the recommendation of the best prototype test unit and to some of the limits imposed on scaling up or down when considering future applications of designs other than those actually tested. In addition, these considerations include aspects required to accurately predict the performance, operation, mechanical reliability, and feasibility of fabrication of the 70 MW design.

Abstract: Tests were performed to determine the effect of thermal cycling on the across-the-seat leakage characteristics of commercially available valves considered for use in the sodium coolant system of the Hallam Nuclear Power Facility.

From objective: "The objective of this work was to design, develop, assemble, and test and automatic analyzing monitor for recording the prominent isotopes in reactor effluent cooling water."

To better understand the solvent extraction process much effort has been and is being expended at ORNL and elsewhere to measure reaction kinetics of the extraction reactions. To date these efforts have been largely unsuccessful, due to the attempt to apply homogeneous reaction kinetics to two-phase systems. An optical method has been devised for analyzing the concentration profile in the vicinity of a quiescent interface during steady-state diffusion at rather large molecular fluxes. The system under study is the extraction of uranyl ion from water by a TBP solution. Considerable effort has been directed to eliminating leaks in the diffusion cell and testing the optical system/

In order to make rational predictions of the operating characteristics of uranium anion exchange contactors, an understanding of the mechanism and kinetics of the exchange is necessary. Toward this objective an effort is being made to determine the equilibrium sorption isotherms and rates of sorption of uranium on the anion exchange resin Dovex 21K.

In order to make rational predictions of the operating characteristics of uranium anion exchange contactors, an understanding of the mechanism and kinetics of the exchange is necessary. Toward this objective an effort is being made to determine the equilibrium sorption isotherms and rates of sorption of uranium on the anion exchange resin Dovex 21K.