This paper describes a model for evaluating the late (after-the-fact) detection capability of material control and accountability (MCandA) systems against insider theft or diversion of special nuclear material. Potential insider cover-up strategies to defeat activities providing detection (e.g., inventories) are addressed by the model in a tractable manner. For each potential adversary and detection activity, two probabilities are assessed and used to fit the model. The model then computes the probability of detection for activities occurring periodically over time. The model provides insight into MCandA effectiveness and helps identify areas for safeguards improvement. 4 refs., 4 tabs.

The proceedings includes talks given at the symposium and the banquet. They include examples of technology at the laboratory and speculation on the future at the laboratory. (GHT)

Security systems and security procedures for the AFRRI reactor, the University of Maryland TRIGA reactor, and the University of Virginia CAVALIER and UVAR reactors are described.

A removable and reusable filter attachment system is disclosed. A filter medium is fixed to, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

Implicit time integration methods have been used extensively in numerical modelling of slowly varying phenomena in systems that also support rapid variation. Examples include diffusion, hydrodynamics and reaction kinetics. This article discussed implementation of implicit time integration in plasma codes of the ''particle-in-cell'' family, and the benefits to be gained.

A coaxial high voltage, high current switch having a solid cylindrical cold cathode coaxially surrounded by a thin hollow cylindrical inner electrode and a larger hollow cylindrical outer electrode is described. A high voltage trigger between the cathode and the inner electrode causes electrons to be emitted from the cathode and flow to the inner electrode preferably through a vacuum. Some of the electrons penetrate the inner electrode and cause a volumetric discharge in the gas (which may be merely air) between the inner and outer electrodes. The discharge provides a low impedance path between a high voltage charge placed on the outer electrode and a load (which may be a high power laser) coupled to the inner electrode. For high repetition rate the gas between the inner and outer electrodes may be continuously exchanged or refreshed under pressure.

The CHROMA laser facility at KMS Fusion has been used to irradiate a variety of microdot targets. These include aluminum dots and mixed bromine dots doped with K-shell (magnesium) emitters. Simultaneously time- and space-resolved K-shell and L-shell spectra have been measured and compared to dynamic model predictions. The electron density profiles are measured using holographic interferometry. Temperatures, densities, and ionization distributions are determined using K-shell and L-shell spectral techniques. Time and spatial gradients are resolved simultaneously using three diagnostics: a framing crystal x-ray spectrometer, an x-ray streaked crystal spectrometer with a spatial imaging slit, and a 4-frame holographic interferometer. Significant differences have been found between the interferometric and the model-dependent spectral measurements of plasma density. Predictions by new non-stationary L-shell models currently being developed are also presented. 14 refs., 10 figs.

Reaction kinetic measurements on the hydrochlorination of SiCl/sub 4/ and mg silicon metal in the presence of a copper catalyst were last reported as a function of reaction temperature, reactor pressure and H/sub 2//SiCl/sub 4/ ratio, 3 SiCl/sub 4/ + 2 H/sub 2/ + Si ..-->.. 4 SiHCl/sub 3/. The same reaction was repeated at a lower catalyst loading of 2 wt%. In the presence of 2 wt% cuprous chloride (based on silicon metal), the hydrochlorination reaction rate is doubled to give about the same performance as those obtained at a higher copper catalyst loading. The effect of particle size distribution of the mg silicon metal on the hydrochlorination reaction rate was studied. Reaction kinetic measurements were made on 150 x 400 mesh Si and on 32 x 65 mesh Si in addition to the standard 65 x 150 mesh Si used in previous studies. Results of these experiments show that the reaction rate is essentially independent of the silicon metal particle size. Thus, the reaction occuring on the Si metal surface is the rate-determining step. Mass transfer via diffusion of reactants and product is not rate-limiting. A plausible mechanism of the hydrochlorination reaction is discussed.

The High Energy Transport Code, HETC, was obtained from the Radiation Shielding Information Center (RSIC) at Oak Ridge National Laboratory and altered as necessary to run on a CDC 7600 using the LTSS software in use at LLNL. HETC was then used to obtain calculated estimates of energy deposited, for comparison with a series of benchmark experiments done by LLNL. These experiments used proton beams of various energies incident on well-defined composite targets in good geometry. In this report, two aspects of the comparison between calculated and experimental energy depositions from an 800 MeV proton beam are discussed. Both aspects involve the fact that workers at SAI had previously used their version of HETC to calculate this experiment and reported their comparison with the measured data. The first aspect addressed is that their calculated data and LLNL calculations do not agree, suggesting an error in the conversion process from the RSIC code. The second aspect is not independent of the first, but is of sufficient importance to merit separate emphasis. It is that the SAI calculations agree well with experiments at the detector plate located some distance from the shower plate, whereas the LLNL calculations show a clearcut discrepancy there …

A CAMAC Serial Highway Interface has been designed for the Local Control and Instrumentation System of the Mirror Fusion Test Facility. There are over 50 distinguishable systems in the facility, each of which consists of the LSI-11 computer, fiber optic communication links, and the CAMAC system. The LSI-11 computer includes a 32k memory, serial modem interface and the CAMAC Serial Highway Interface.

Methods of removing fluorides from water are reviewed and recommendations are made for treating geothermal water used by the Boise Geothermal Project, Boise, Idaho. The Boise geothermal water except for its high fluoride content would be high quality, suitable for primary drinking water. Fluoride ranges from about 15 to 25 mg/l in water from various wells in the Boise region where the Project plans to obtain hot water. Four techniques for removing fluorides from water have been studied extensively during the past 15 years or so. Electrodialysis and reverse osmosis are useful in reducing total dissolved solids from brackish water, but are nonspecific and are too expensive for treatment of the Boise geothermal water. Selective precipitation is a widely used technique for treating water, but would also prove expensive for the Boise geothermal water because of the relatively high solubility of fluoride salts and consequently high concentration (and cost) of precipitants required to reduce the fluorides to an acceptable level. Ion-exchange separation using activated alumina as the exchange medium appears to be the most promising technique and we recommend that some laboratory and pilot studies be conducted to establish suitability and operating boundaries.

In the program of development of a water treatment for the 5 MW Raft River power plants' carbon steel heat rejection system, four carbon steel tubes were analyzed in this batch. The results of visual and scanning electron microscope examination of the tubes are presented. (MHR)

An improved downhole steam injector has an angled water orifice to swirl the water through the device for improved heat transfer before it is converted to steam. The injector also has a sloped diameter reduction in the steam chamber to throw water that collects along the side of the chamber during slant drilling into the flame for conversion to steam. In addition, the output of the flame chamber is beveled to reduce hot spots and increase efficiency, and the fuel-oxidant inputs are arranged to minimize coking.

Exploratory drill hole UE2ce was drilled in January 1977 to determine geologic and geophysical characteristics of this site. This report presents geophysical logs, lithology, geologic structure, water table measurements, and physical properties for this drill hole. The data are then extrapolated to the NASH site, an event in U2ce, 55.6 m due north of UE2ce.

Micro-channel plate multipliers have been used to detect the passage of relativistic charged particles. Measurements of the detection efficiency and pulse height response versus micro-channel plate gain are presented for one, two and three micro-channel plate arrays. The probability of detecting an avalanche on the detector anode per one channel of MCP crossed by the relativistic particle was calculated. Temporal response and time jitter were measured and are reported. The track images of beam particles crossing the detector are shown.

Although production of U/sub 3/O/sub 8/ declined only slightly in 1980, New Mexico's share of domestic production has declined from 48% in 1976 to 35% in 1980. Production projections indicate a continued decline in 1981 and lower production until at least 1984. New Mexico has 41% of total domestic reserves producible in the $50-per-lb cost category. In keeping with the anticipated steady depletion of reserves, production of crude oil in New Mexico was 69.9 million bls, a 6.3% decline in production from 1979. Condensate production of 5.4 million bbls in 1980, however, represented an increase of 7% from 1979 production. Although natural gas production was the lowest since 1970 and declined by 2.6% from 1979 production, 1980 was the 15th year that production exceeded 1 trillion cu ft. Despite declines in production, the valuation of oil and gas production has increased significantly with oil sales doubling from the previous year and gas sales increasing by $409 million because of higher prices. Reserves have been estimated to be 959 million bbls of crude oil and 17.667 trillion cu ft of natural gas. Production of 19.5 million short tons of coal in 1980 represented a 33% increase over 1979 production and an …

Beam fractions lost by collimation in a neutralizer duct are computed in x-x' phase space by using three examples of slab beam distributions under a broad range of duct dimensions, beam half-widths, and beam divergences. The results can be used to design compact neutralizers and to specify beam requirements. The computer code ILOST can be used under a broad range of beam conditions to compute the fraction lost by collimation.

A serial communications system based on the EIA RS232-C standard with modem control lines has been developed. The DLV11-E interface is used for this purpose. All handshaking is done with the modem control lines. This allows totally independent full duplex communication. The message format consists of eight bit data with odd parity and a sixteen bit checksum on the whole message. All communications are fully interrupt driven. A program was written to load a program into a remote LSI-11 using the serial line without bootstrap ROM.

Fracture is an important design consideration for components whose sudden and catastrophic failure could result in a serious accident. Elements of fracture control and fracture mechanics design methods are reviewed. Design requirements, which are based on the consequences of fracture of a given component, are subsequently developed. Five categories of consequences are defined. Category I is the lowest risk, and relatively lenient design requirements are employed. Category V has the highest potential for injury, release of hazardous material, and damage. Correspondingly, the design requirements for these components are the most stringent. Environmental, loading, and material factors that can affect fracture safety are also discussed.

Several practical aspects of rf acceleration (by a MEQALAC accelerator, for example) of positive and negative ions for MFE neutral injection were considered. The beam transport, gas flow, differential pumping, and compatibility with MFE beam lines were examined. It was found that rf acceleration has several advantages over dc acceleration, especially if high energy (over 100 keV) and/or high purity (over 99%) is required. Therefore rf acceleration should be considered especially in connection with negative ions, which also have competitive advantages under such requirements. Beam densities for rf may be lower than dc beam densities because of space charge limitations and electrode transparency. However, the overall dimensions of an rf system are competitive with or smaller than the dimensions of a dc system of equal current and voltage because the gas pumping and electrical insulation are included within the rf electrode assembly. Ion source development is required to produce an array of many small beams suitable for injection into a MEQALAC.

The present invention is directed to a fuel-air control system for a combustor in which coal-derived gas of varying heat content is used. To maintain the temperature in the combustor at an essentially constant value the fuel-to-air ratio is adjusted by using a temperature actuated variable pressure regulator in the gas feed line to compensate for the variability of the heat content of the gas. The velocity of the products of combustion is maintained at an essentially constant flow rate by controlling the mass flow of the air and fuel through linked valves on the gas and air feed lines.

Rutherford scattering of neutral particles by plasma ions is examined as a method for determining plasma ion in the central cell fo the Tandem Mirror Experiment (TMX). When a scattering configuration, consisting of a 20-keV-, 10-A-deuterium neutral beam and an energy analyzer with a 1% resolution, is arranged such that only neutral particles scattered by plasma ions over an angle of 10/sup 0/ are accepted, central-cell ion temperatures in the 30- to 1000-eV range can be measured. The count rate registered by the detector(s) is estimated to be 2000 counts/ms. Consequently, good statistical accuracy and time resolution are attainable simultaneously. The results of the calculation are presented such that the scaling of the count rates and the energy broadening with scattering angle, neutral-beam energy, ion temperature, and plasma density can easily be deduced. Neutral helium beams are also considered; they have some advantages over deuterium beams. The background signal, caused by neutral particles entering the detector after two successive charge-exchange collisions, is examined and ways to completely eliminate this background are indicated.

One year ago, LLNL was just completing the installation of a Direct Current Plasma (DCP) spectrometer for the analysis of Pu and Pu alloys. The installation was completed in December 1982 and has been utilized regularly for Pu analysis since then. This paper discusses the experience with the instrument and some data demonstrating its performance.

We will describe our optical laser pumped xuv Laser Program. To date, we have concentrated our efforts on exploding foil amplifier designs using Ne-like n=3p to 3s inversion schemes. We will describe our latest modeling results as well as measurements which demonstrate output power near the 1 MW level at 206 and 209 A and lasing at wavelengths as short as 106 A.