This milestone report summarizes the general characteristics of scuffing damage to solid surfaces, then describes transient effects on scuffing observed during oscillating sliding wear tests of candidate material pairs for high-temperature diesel engine applications, like waste-gate bushings in exhaust gas recirculation (EGR) systems. It is shown that oxidation and the formation of wear particle layers influence the friction of such components. In the case of metallic materials in cylindrical contacts where there is a generous clearance, debris layers can form which reduce the torque over time. For ceramic combinations, the opposite effect is observed. Here, the accumulation of wear debris leads to an increase in the turning torque. High-temperature transient scuffing behavior is considered in terms of a series of stages in which the composition and morphology of the contact is changing. These changes are used to explain the behavior of 11 material pairs consisting of stainless steels, Ni-based alloys, Co-based alloys, and structural ceramics.

A novel real-time monitor for aerosol particles has been developed by the Oak Ridge National Laboratory (ORNL). The instrument is designed to perform in-situ measurement for the elemental composition of aerosol particles in flue gas. They had tested this monitor at the Eastman Chemical Company in July 2001 taking advantage of the emissions from a waste incinerator operated by the company as the background. To investigate the behavior and response of the monitor under simulated/known conditions, stock solutions of prepared metal concentration(s) were nebulized to provide spikes for the instrument testing. Strengths of the solutions were designed such that a reference method (RM) was able to collect sufficient material on filter samples that were analyzed in a laboratory to produce 30-minute average data points. Parallel aerosol measurements were performed by using the ORNL instrument. Recorded signal of an individual element was processed and the concentration calculated from a calibration curve established prior to the campaign. RM data were able to reflect the loads simulated in the spiked waste stream. However, it missed one beryllium sample. The possibility of bias exists in the RM determination of chromium that could lead to erroneous comparison between the RM and the real-time monitoring data. …

Previously reported stress corrosion cracking (SCC) rates for Alloy 82H gas-tungsten-arc welds tested in 360 C water showed tremendous variability. The excessive data scatter was attributed to the variations in microstructure, mechanical properties and residual stresses that are common in welds. In the current study, however, re-evaluation of the SCC data revealed that the large data scatter was an anomaly due to erroneous crack growth rates inferred from crack mouth opening displacement (CMOD) measurements. Apparently, CMOD measurements provided reasonably accurate SCC rates for some specimens, but grossly overestimated rates in others. The overprediction was associated with large unbroken ligaments that often form in welds in the wake of advancing crack fronts. When ligaments were particularly large, they prevented crack mouth deflection, so apparent crack incubation times (i.e. period of time before crack advance commences) based on CMOD measurements were unrealistically long. During the final states of testing, ligaments began to separate allowing the crack mouth to open rather quickly. This behavior was interpreted as a rapid crack advance, but it actually reflects the ligament separation rate, not the SCC rate. Revised crack growth rates obtained in this study exhibit substantially less scatter than that previously reported. The effects of crack …

Solid state experiments at very high pressures and strain rates are possible on high power laser facilities, albeit over brief intervals of time and spatial small scales. A new shockless drive has been developed on the Omega laser. VISAR measurements establish the high strain rates, 10{sup 7}-10{sup 8} s{sup -1}. Solid-state strength is inferred using the Rayleigh-Taylor instability as a ''diagnostic''. Temperature and compression in polycrystalline samples can be deduced from EXAFS measurements. Lattice response can be inferred from time-resolved x-ray diffraction. Deformation mechanisms can be identified by examining recovered samples. We will briefly review this new area of laser-based materials science research, then present a path forward for carrying these solid-state experiments to much higher pressures, P >> 1 Mbar, on the NIF laser facility.

Laser peening is an emerging modern process that impresses a compressive stress into the surfaces of metals. Treatment can reduce the rate of fatigue cracking and stress-corrosion-cracking in metals (such as gears, bolts and cutters) needed for tunnel boring and other construction & mining applications. Laser peening could also be used to form metals or alloys into a precise shape without yielding and leaving both sulfates in a crack resistant compressive state.

Future-looking high end computing initiatives will deploy powerful, large-scale computing platforms that leverage novel component technologies for superior node performance in advanced system architectures with tens or even hundreds of thousands of nodes. Recent advances in performance tools and modeling methodologies suggest that it is feasible to acquire such systems intelligently and achieve excellent performance, while also significantly reducing the user time required to attain high performance. These developments are relevant to several aspects of future HEC technology outlined in the recent HECRTF white paper request, in particular items 5.4, 5.5, 5.6, and 5.8. We envision the following specific capabilities: (1) Performance modeling tools, available to researchers and vendors, will extrapolate performance from prototype systems to full-scale systems, and even accurately predict performance behavior before systems are manufactured, thus enabling both improved designs and more intelligent selection of systems in procurements. (2) System simulation facilities, implemented on highly parallel platforms and available to researchers and vendors, will for instance realistically model the performance of a specific interprocessor network design running a specific scientific application code. As with item 1, these facilities can lead both to improved designs and procurement decisions that yield significantly greater sustained performance for targeted scientific applications. …

This interim change notice makes changes in the original groundwater monitoring plan. This ICN documents the deferral of statistical upgradient/downgradient comparisons for WMA C until conductivity stabilized in upgradient well 299-E27-7 or a new upgradient well is installed and stable and upgradient values for specific conductance are obtained.

The stockpile stewardship program is interested in neutron cross-section measurements on nuclei that are a few nucleons away from stability. Since neutron targets do not exist, radioactive targets are the only way to directly perform these measurements. This requires a facility that can provide high production rates for these short-lived nuclei as well as a source of neutrons. The Rare Isotope Accelerator (RIA) promises theses high production rates. Thus, adding a co-located neutron source facility to the RIA project baseline would allow these neutron cross-section measurements to be made. A conceptual design for such a neutron source has been developed, which would use two accelerators, a Dynamitron and a linac, to create the neutrons through a variety of reactions (d-d, d-t, deuteron break-up, p-Li). This range of reactions is needed in order to provide the desired energy range from 10's of keV to 20 MeV. The facility would also have hot cells to perform chemistry on the radioactive material both before and after neutron irradiation. The present status of this design and direction of future work will be discussed.

The PLEIADES (Picosecond Laser-Electron Inter-Action for the Dynamical Evaluation of Structures) facility has produced first light at 70 keV. This milestone offers a new opportunity to develop laser-driven, compact, tunable x-ray sources for critical applications such as diagnostics for the National Ignition Facility and time-resolved material studies. The electron beam was focused to 50 {micro}m rms, at 57 MeV, with 260 C of charge, a relative energy spread of 0.2%, and a normalized emittance of 5 mm mrad horizontally and 13 mm mrad vertically. The scattered 820-nm laser pulse had an energy of 180 mJ and a duration of 54 fs. Initial x-rays were captured with a cooled charge-coupled device using a Cesium Iodide scintillator; the peak photon energy was approximately 78 keV, with a total x-ray flux of 1.3 x 10{sup 6} photons/shot, and the observed angular distribution found to agree very well with three-dimensional codes. Simple K-edge radiography of a tantalum foil showed good agreement with the theoretical divergence-angle dependence of the x-ray energy. Optimization of the x-ray dose is currently underway, with the goal of reaching 10{sup 8} photons per shot and a peak brightness approaching 10{sup 20} photons/mm{sup 2}/mrad{sup 2}/s/0.1%bandwidth.

PNNL provides third-party oversight of the Hanford double shell tank inspection program.

Scientific progress is becoming increasingly dependent of our ability to study phenomena at multiple scales and from multiple perspectives. The ability to recontextualize third party data within the semantic and syntactic framework of a given research project is increasingly seen as a primary barrier in multi-scale science. Within the Collaboratory for Multiscale Chemical Science (CMCS) project, we are developing a general-purpose informatics-based approach that emphasizes ''on-demand'' metadata creation, configurable data translations, and semantic mapping to support the rapidly increasing and continually evolving requirements for managing data, metadata, and data relationships in such projects. A concrete example of this approach is the design of the CMCS provenance subsystem. The concept of provenance varies across communities, and multiple independent applications contribute to and use provenance. In CMCS, we have developed generic tools for viewing provenance relationships and for using them to, for example, scope notifications and searches. These tools rely on a configurable concept of provenance defined in terms of other relationships. The result is a very flexible mechanism capable of tracking data provenance across many disciplines and supporting multiple uses of provenance information.

Spatially Resolved X-Ray Diffraction (SRXRD) has been used to identify a previously unobserved low temperature ferrite ({delta})/austenite({gamma}) phase transformation in the heat affected zone (HAZ) of 2205 Duplex Stainless Steel (DSS) welds. In this ''ferrite dip'' transformation, the ferrite transforms to austenite during heating to peak temperatures on the order of 750 C, and re-transforms to ferrite during cooling, resulting in a ferrite volume fraction equivalent to that in the base metal. Time Resolved X-Ray Diffraction (TRXRD) and laser dilatometry measurements during Gleeble{reg_sign} thermal simulations are performed in order to verify the existence of this low temperature phase transformation. Thermodynamic and kinetic models for phase transformations, including both local-equilibrium and para-equilibrium diffusion controlled growth, show that diffusion of substitutional alloying elements does not provide a reasonable explanation for the experimental observations. On the other hand, the diffusion of interstitial alloying elements may be rapid enough to explain this behavior. Based on both the experimental and modeling results, two mechanisms for the ''ferrite dip'' transformation, including the formation and decomposition of secondary austenite and an athermal martensitic-type transformation of ferrite to austenite, are considered.

A literature review and assessment was conducted by Pacific Northwest National Laboratory (PNNL) to update information on plant and animal radionuclide transfer factors used in performance-assessment modeling. A group of 15 radionuclides was included in this review and assessment. The review is composed of four main sections, not including the Introduction. Section 2.0 provides a review of the critically important issue of physicochemical speciation and geochemistry of the radionuclides in natural soil-water systems as it relates to the bioavailability of the radionuclides. Section 3.0 provides an updated review of the parameters of importance in the uptake of radionuclides by plants, including root uptake via the soil-groundwater system and foliar uptake due to overhead irrigation. Section 3.0 also provides a compilation of concentration ratios (CRs) for soil-to-plant uptake for the 15 selected radionuclides. Section 4.0 provides an updated review on radionuclide uptake data for animal products related to absorption, homeostatic control, approach to equilibration, chemical and physical form, diet, and age. Compiled transfer coefficients are provided for cow’s milk, sheep’s milk, goat’s milk, beef, goat meat, pork, poultry, and eggs. Section 5.0 discusses the use of transfer coefficients in soil, plant, and animal modeling using regulatory models for evaluating radioactive waste …

The infrared sensors task of Pacific Northwest National Laboratory's (PNNL's) Remote Spectroscopy Project (Task B of Project PL211) is focused on the science and technology of remote and in-situ spectroscopic chemical sensors for detecting proliferation and coun-tering terrorism. Missions to be addressed by remote chemical sensor development in-clude detecting proliferation of nuclear or chemical weapons, and providing warning of terrorist use of chemical weapons. Missions to be addressed by in-situ chemical sensor development include countering terrorism by screening luggage, personnel, and shipping containers for explosives, firearms, narcotics, chemical weapons, or chemical weapons residues, and mapping contaminated areas. The science and technology is also relevant to chemical weapons defense, air operations support, monitoring emissions from chemi-cal weapons destruction or industrial activities, law enforcement, medical diagnostics, and other applications. Sensors for most of these missions will require extreme chemical sensitivity and selectiv-ity because the signature chemicals of importance are expected to be present in low con-centrations or have low vapor pressures, and the ambient air is likely to contain pollutants or other chemicals with interfering spectra. Cavity-enhanced chemical sensors (CES) that draw air samples into optical cavities for laser-based interrogation of their chemical content promise real-time, in-situ chemical detection with extreme sensitivity …

The National Science Foundation (NSF) is conducting a collection of baseline data that will serve as an index for describing the way in which grant applications/proposals are developed and tracked at grant recipient organizations. The type of information to be collected includes (1) estimate of burden, both time and cost, to the applicant organization (2) descriptiion of the overall development and tracking systems used by the applicant, and (3) data that can be compared after the implementation of either a streamlined paper or electronic system.

The long-term objective is to develop blood-brain barrier (BBB) permeable m2-selective (relative to m1, m3, and m4) receptor-binding radiotracers and utilize these radiotracers for quantifying receptor concentrations obtained from PET or SPECT images of human brain. In initial studies, we concluded that the lipophilicity and high affinity prevented (R,S)-I-QNB from reaching a flow-independent and receptor-dependent state in a reasonable time. Thus, it was clear that (R,S)-I-QNB should be modified. Therefore, during the last portion of this funded research, we proposed that more polar heterocycles should help accomplish that. Since reports of others concluded that radiobromination and radiofluorination of the unactivated phenyl ring is not feasible (Newkome et al,,1982), we, therefore, explored during this grant period a series of analogues of (R)-QNB in which one or both of the six-membered phenyl rings is replaced by a five-membered thienyl (Boulay et al., 1995), or furyl ring. The chemistry specific aims were to synthesize novel compounds designed to be m2-selective mAChR ligands capable of penetrating into the CNS, and develop methods for efficient radiolabeling of promising m2-selective muscarinic ligands. The pharmacology specific aims were to determine the affinity and subtype-selectivity of the novel compounds using competition binding studies with membranes from cells that …

None

The slow-roll inflation is a beautiful paradigm, yet the inflaton potential can hardly be sufficiently flat when unknown gravitational effects are taken into account. However, the hybrid inflation models constructed in D = 4 N = 1 supergravity can be consistent with N = 2 supersymmetry, and can be naturally embedded into string theory. This article discusses the gravitational effects carefully in the string model, using D = 4 supergravity description. We adopt the D3--D7 system of Type IIB string theory compactified on K3 x T^2/Z_2 orientifold for definiteness. It turns out that the slow-roll parameter can be sufficiently small despite the non-minimal Kahler potential of the model. The conditions for this to happen are clarified in terms of string vacua. We also find that the geometry obtained by blowing up singularity, which is necessary for the positive vacuum energy, is stabilized by introducing certain 3-form fluxes.

A problem in developmental biology that continues to take center stage is how higher organisms generate diverse tissues and organs given the same cellular genotype. In cell and tumor biology, the key question is not the production of form, but its preservation: how do tissues and organs maintain homeostasis, and how do cells within tissues lose or overcome these controls in cancer? Undoubtedly, mechanisms that maintain tissue specificity should share features with those employed to drive formation of the tissues. However, they are unlikely to be identical. At a simplistic level, developmental pathways may be thought of as a series of extremely rapid short-term events. Each new step depends on what came before, and the outcome is the organism itself at birth. All organs, with a few notable exceptions, such as the mammary gland and the brain, 'arrive' together and are complete when the organism is born. In mice and humans, these events occur in a mere 21 days and 9 months respectively. The stability of the differentiated state and the homeostasis of the organism, on the other hand, will last 40-110 times longer. How does the organism achieve this feat? How are tissues maintained? These questions also relate fundamentally …

The principal objective of this project is to develop materials technology for use in ultrasupercritical (USC) plant boilers capable of operating with 760 C (1400 F), 35 MPa (5000 psi) steam. This project has established a government/industry consortium to undertake a five-year effort to evaluate and develop of advanced materials that allow the use of advanced steam cycles in coal-based power plants. These advanced cycles, with steam temperatures up to 760 C, will increase the efficiency of coal-fired boilers from an average of 35% efficiency (current domestic fleet) to 47% (HHV). This efficiency increase will enable coal-fired power plants to generate electricity at competitive rates (irrespective of fuel costs) while reducing CO{sub 2} and other fuel-related emissions by as much as 29%. Success in achieving these objectives will support a number of broader goals. First, from a national prospective, the program will identify advanced materials that will make it possible to maintain a cost-competitive, environmentally acceptable coal-based electric generation option. High sulfur coals will specifically benefit in this respect by having these advanced materials evaluated in high-sulfur coal firing conditions and from the significant reductions in waste generation inherent in the increased operational efficiency. Second, from a national prospective, the …

The electric field in the temporal and spectral domain of coherent diffraction-limited transition radiation is studied. An electron bunch, with arbitrary longitudinal momentum distribution, propagating at normal incidence to a sharp metal-vacuum boundary with finite transverse dimension is considered. A general expression for the spatiotemporal electric field of the transition radiation is derived, and closed-form solutions for several special cases are given. The influence of parameters such as radial boundary size, electron momentum distribution, and angle of observation on the waveform (e.g., radiation pulse length and amplitude) are discussed. For a Gaussian electron bunch, the coherent radiation waveform is shown to have a single-cycle profile. Application to a novel THz source based on a laser-driven accelerator is discussed.

A Department of Energy (DOE) multi-laboratory Water Cycle Pilot Study (WCPS) investigated components of the local water budget at the Walnut River Watershed in Kansas to study the relative importance of various processes and to determine the feasibility of observational water budget closure. An extensive database of local meteorological time series and land surface characteristics was compiled. Numerical simulations of water budget components were generated and, to the extent possible, validated for three nested domains within the Southern Great Plains; the DOE Atmospheric Radiation Measurement/Cloud Atmospheric Radiation Testbed (ARM/CART), the Walnut River Watershed (WRW), and the Whitewater Watershed (WW), Kansas A 2-month Intensive Observation Period (IOP) was conducted to gather detailed observations relevant to specific details of the water budget, including fine-scale precipitation, streamflow, and soil moisture measurements not made routinely by other programs. Event and season al water isotope (delta 18O, delta D) sampling in rainwater, streams, soils, lakes, and wells provided a means of tracing sources and sinks within and external to the WW, WRW, and the ARM/CART domains. The WCPS measured changes in leaf area index for several vegetation types, deep groundwater variations at two wells, and meteorological variables at a number of sites in the WRW. …

The overall objective of the present project is to identify and assess strategies and solutions for the management of industry problems related to carbon in ash. Specific research issues to be addressed include: (1) the effect of parent fuel selection on ash properties and adsorptivity, including a first ever examination of the air entrainment behavior of ashes from alternative (non-coal) fuels; (2) the effect of various low-NOx firing modes on ash properties and adsorptivity; and (3) the kinetics and mechanism of ash ozonation. This data will provide scientific and engineering support of the ongoing process development activities. During this fourth project period we completed the characterization of ozone-treated carbon surfaces and wrote a comprehensive report on the mechanism through which ozone suppresses the adsorption of concrete surfactants.

We report on the rapidity and centrality dependence of proton and anti-proton transverse mass distributions from {sup 197}Au + {sup 197}Au collisions at {radical}s{sub NN} = 130 GeV as measured by the STAR experiment at RHIC. Our results are from the rapidity and transverse momentum range of |y| < 0.5 and 0.35 < p{sub t} < 1.00 GeV/c. For both protons and anti-protons, transverse mass distributions become more convex from peripheral to central collisions demonstrating characteristics of collective expansion. The measured rapidity distributions and the mean transverse momenta versus rapidity are flat within |y| < 0.5. Comparisons of our data with results from model calculations indicate that in order to obtain a consistent picture of the proton(anti-proton) yields and transverse mass distributions the possibility of pre-hadronic collective expansion may have to be taken into account.